[CLOSED][ROM][12.1_r22][EOL][OFFICIAL] Evolution X 6.7 [08/14/2022]

[Cathuulu]

Cannot read BUILD.zip after fastboot recovery, cannot read namerom.zip, and after rom installer stop working in ODM file because phone rebooting to new recovery, and there is a fastboot which not working for me, only fabric fastboot, but always rebooting to recovery. PLS HELP my brick

 

[heisenberghdf]

Turn off the "Gesture Indicator"
Settings -> The Evolver -> Buttons -> System Navigation -> Gear icon -> Gesture Indicator

Yeah, yesterday after 1h looking for the option I find it, thank you!

 

[AnierinB]

Builds based on OOS12 fw, kernel & vendor should be ready for release this weekend, still Ironing out a few issues. Stay tuned for updated installation instructions

#KeepEvolving

 

[enjoy_life]

Builds based on OOS12 fw, kernel & vendor should be ready for release this weekend, still Ironing out a few issues. Stay tuned for updated installation instructions

#KeepEvolving

Will the issue with HDR video be fixed in the upcoming build? Thanks for all your hard work.

 

[AnierinB]

Will the issue with HDR video be fixed in the upcoming build? Thanks for all your hard work.

Yes, it is
It's currently being worked on

 

[mcboums]

del

 

[Deleted member 8880810]

Builds based on OOS12 fw, kernel & vendor should be ready for release this weekend, still Ironing out a few issues. Stay tuned for updated installation instructions

#KeepEvolving

Cant wait!

 

[mcboums]

As a result of this, the PBL (Primary Bootloader) will load XBL (Secondary Bootloader) no matter which one you choose to flash. This change has only been introduced with the Android 12 firmware [OxygenOS 12/ColorOS 12]. Till Android 11, both the OnePlus 8 and 8 Pro firmwares were shipped with a single bootloader and it was either aimed at LPDDR5 or LPDDR4X RAM.

However, with OxygenOS 12, OnePlus now ships both the DDR4 and DDR5 in the same firmware package. Digging a little bit into the technicalities, the DDR5 RAM uses lower voltage compared to DDR4X. So when you end up unintentionally flashing the DDR4 package on DDR5, then the latter will get the voltage way beyond its permissible limit. As a result of which, it would end up killing the motherboard!

 

[QuiDC96]

Evolution X 6.6 for the OnePlus 8, 8 Pro & 8T [Instantnoodle][Instantnoodlep][Kebab]

View attachment 5609001

Living, Breaking, Keep Evolving.
Pixel UI, customization and more, we are Evolution X!

- Team Evolution X -
@joeyhuab (Founder/Lead Developer)
@peaktogoo (Project Manager/Co-Founder)
@AnierinB (Project Specialist/Co-Founder)

Reach us on Twitter! @EvolutionXROM

Check out our website!
​

Spoiler: Feature List

Themes
- Black Theme
- Monet Engine
- Dark Theme Schedules
- System Fonts (39 Styles)
- SB Icon Packs (10 Styles)
- SB Signal Icon Packs (9 Styles)
- SB WiFi Icon Packs (9 Styles)
- System Icon Packs (16 Styles)

Statusbar
- System SB UI Tuner
- Clock Styles (Right, Center, Left)
- Clock & Date Configs (Auto Hide, Seconds, AM/PM, Date Postion/Case/Format)
- Network Traffic Indicators
- Battery Icon (9 Styles, 3 Percentage Options, Colorful Icon)
- SB Evo Logo
- Data Disabled Icon (On/Off)
- Old Style Mobile Data
- 4G Instead Of LTE
- VoLTE Icons (24 Styles)
- VoWiFi Icons (7 Styles)
- VoWiFi Overide Toggle
- Roaming Indicator
- BT Battery Status
- Combined Signal Icon
- Mic & Privacy Indicator
- Location Indicator

Notifications
- Alert Slider Notifications (OnePlus Only)
- ReTicker
- Ambient Edge Lighting
- Heads Up
- Notification Count
- Notification Sound
- Notification Headers
- Kill App Button
- Blink Flashlight For Incoming Call
- In-Call-Vibrations (Connect, Waiting, Disconnect)

Quick Settings
- Date
- Secure QS
- Battery Estimates
- Quick QS Pulldown
- Album Art Media Background (Blur, Transparency)
- Brightness Slider (Bottom, Hidden, Auto Icon)
- QS Footer Warnings
- User Account
- Edit Icon
- Power Menu Shortcut
- Running Services Shortcut
- Settings Shortcut
- Clear All Button (9 Styles, 4 Backgrounds)

Power Menu
- System Settings ( Hold PWR Assistant + Hold Duration)
- Power
- Restart
- Advanced Reboot Options
- Screenshot
- On-The-Go Mode
- Flashlight
- Settings
- Lock Down
- Emergency
- Device Controls
- Users
- Logout
- Bug Report

Gestures
- AOSP Gestures
- Quick Tap
- Advanced Gesture Configs
- Swipe To Screenshot
- Brightness Control
- PWR Button Torch
- Double Tap To Sleep Status Bar
- Double Tap to Sleep Lockscreen
- Double Tap to Wake On Doze
- Back Gesute Haptic Feedback
- Back Gesture Animation
- Gesture Indicator
- IME Space Disabler
- Swipe To Invoke Assistant
- Left/Right Sensitivity
- Back Gesture Height Region
- Pill Length/Radius

Lockscreen
- UDFPS Haptic Feedback
- UDFPS Icon Picker (39 Styles)
- UDFPS Animation Picker (36 Styles)
- Apply Accent Color To AOD Clock
- Double-Line Clock
- AOD Schedule
- Hide SB
- Hide QS
- Media Cover Art
- UDFPS Ripple Effect
- Fingerprint Auth Vibration
- Fingerprint Error Vibration

Buttons
- On-Screen NavBar
- Arrow Keys While Typing On 3 Button Layout
- Compact 3 Button Layout
- Invert 3 Button Layout
- Show Vol Panel On Left Side
- Per App Vol Control
- Volume Steps Configs (Alarm, DTMF, Media, Notification, Ringer, System, Voice Call)
- Volume Rocker Wake
- Keyboard Cursor Control

Miscellaneous
- Game Space
- Hidden Apps
- Launch Music App On Headset Connect
- Screenshot Type (Full, Drag)
- Screen Off Animation (Default, CRT, Scale)
- Unlimited Photos Storage
- Unlock Higher FPS In Games
- Unlock Higher Quality Streams In Video Apps
- Pulse Music Visualizer
- Allow App Downgrade
- Show Tempature Warning
- Ignore Window Secure Flags
- Show CPU Info
- Toast App Icon
- Default USB Configuration
- Radio Info
- Face Unlock

Spoiler: Device specific feature List

My signature Universal DeviceExtras application:
- Awesome alert slider (Notification/Flashlight/Brightness/Rotation/Ringer/Notification & Ringer)
- Ambient display gestures (raise2wake)
- Kcal
- DC-Dimming toggle
- HBM toggle
- Auto HBM toggle (with lux adjustment preference)
- FPS overlay (9 Positions, 11 Colors & accent, 9 Sizes
- Screen off gestures (9 Gestures, 22 Actions)
- Game mode toggle (240hz touch sampling rate)
-TP edge limit (disable edge detection)
- USB2.0 Fastcharge toggle
- System Vibration Strength preference

You tell me

DO NOT FLASH GAPPS, ALREADY INCLUDED​

First Time Install / Clean Flash

IT'S EXTREMELY IMPORTANT THAT YOU FLASH THE CORRECT LPDDR FW FOR YOUR DEVICE...... Else you will end up in a non-recoverable hardbrick and I will not take responsibility for anyone who does

1. Be on the latest Evolution X 6.5 (OOS11) based build (June 2022 releases)

2. using adb/adb shell run, getprop ro.boot.ddr_type (0=LPDDR4 & 1=LPDDR5)

3. Reboot to recovery

4. When in recovery, go to advanced -> enter fastboot (this is fastbootd)

5. Update FW to EU C20 by downloading the FW ZIP that matches your device & LPDDR version (do not reboot)

6. Go back to recovery from fastbootd (do not reboot!)

7. Sideload latest Evolution X 6.6 build (OOS12) based build (July 2022 releases)

8. Format data & reboot

Update / Dirty Flash
1. Boot into recovery
2. adb sideload BUILD.zip
3. Reboot to system & #KeepEvolving

KEEP IN MIND THERE IS ALSO OTA UPDATES!​

​

• Android version: 12.1_r11
• Security patch level: June 2022
• Build author: Anierin Bliss
• Kernel Source: https://github.com/Evolution-X-Devices/kernel_oneplus_sm8250
• ROM Developer: joeyhuab
• Source code: https://github.com/Evolution-X

I'm confused.
Did I follow now the first install Instructions or can I use the update instructions to update my phone without losing data.

I don't want to setup everything new because I did that two days ago...

 

[petes]

I'm confused.
Did I follow now the first install Instructions or can I use the update instructions to update my phone without losing data.

I don't want to setup everything new because I did that two days ago...

If you're on the oplus alpha, then I think you can just follow the dirty flash instructions, but to move from the oos11 to oos12 oplus firmware, it's defo going to need a clean flash.

 

[QuiDC96]

If you're on the oplus alpha, then I think you can just follow the dirty flash instructions, but to move from the oos11 to oos12 oplus firmware, it's defo going to need a clean flash.

I got a OnePlus 8 EU and on June 2022 update

Did you try to skip the step 8?
I mean to only reboot the phone without format data. Will the system boot it anyway?

 

[petes]

I got a OnePlus 8 EU and on June 2022 update

Did you try to skip the step 8?
I mean to only reboot the phone without format data. Will the system boot it anyway?

Do you mean you're on evo-x 6.6 alpha builds, in which case you just need to follow the intructions on the first post for a dirty flash, or are you on OOS12 itself?

 

[QuiDC96]

Do you mean you're on evo-x 6.6 alpha builds, in which case you just need to follow the intructions on the first post for a dirty flash, or are you on OOS12 itself?

I'm on evo-x 6.5 and want to follow the clean install instructions to update to 6.6 but I don't wipe data in step 8.
Will the system boot it anyway?

 

[AnierinB]

I'm on evo-x 6.5 and want to follow the clean install instructions to update to 6.6 but I don't wipe data in step 8.
Will the system boot it anyway?

You can try it, but big doubt it will.

 

[Larkin24]

I want to go Back to OOS11 evo 6.5 how do i do that?

I updated to evo 6.6. Do you have a OOS11 FW zip that can to do that?

 

[Julien Gontier]

Do i need to do a clean install to go to evolutionX 6.6 from evolutionX 6.5? Or can i just dirty flash it and update trough OTA as usual?
I'm on a Oneplus 8 (instantnoodle) btw

 

[szmataman]

Anyone has a problem with SIM card after latest update 6.6? After clean update using the instruction, system booting normal but the phone does not see the SIM card.

So after second try of clean install it is the same issue, phone detects number from SIM card but i cannot call or send text messages same like I'll be stuck in "flight mode" is it any fix on that or I'm doing something wrong? btw on 6.5 everything working fine.

 

[QuiDC96]

Do i need to do a clean install to go to evolutionX 6.6 from evolutionX 6.5? Or can i just dirty flash it and update trough OTA as usual?
I'm on a Oneplus 8 (instantnoodle) btw

I already ask it ;-)
You need to factory reset everything and do a clean install.

https://xdaforums.com/t/rom-12-1_r11-official-evolution-x-6-6-07-11-2022.4276623/post-87131399

 

[Julien Gontier]

I already ask it ;-)
You need to factory reset everything and do a clean install.

https://xdaforums.com/t/rom-12-1_r11-official-evolution-x-6-6-07-11-2022.4276623/post-87131399

oh that suck...
Do you have maybe a solution to prevent the gallery to be a stupid mess and not being in order after transferring all of the data back?

 

[5i1v3rStorm]

I have!

I usually do this:

1.) be rooted
2.) download the rsync binary and make it executable
3.) make a Titanium-, Signal- and Threema Backup to the SD folder
3.) rsync the whole /storage/emulated/0 folder to an external USB-C NVme SSD (I use a Terminal emulator and call a "rsync -av")

After the full wipe I can sync the folder back from the SSD and restore the backups. Still some work to be done but way better than a copy over MTP to a PC.