• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

[ROM][12][blueline/crosshatch] PixelExperience [AOSP][OFFICIAL]

Search This thread

contevo

Member
Feb 12, 2017
32
3
39
New York, New York
hello, I've been using PE 12 for a day now. I've notice native hotspot when is on, is not showing up on my laptop wifi list nor on my table list either. I switch signal from 2.4ghz to 5.0ghz nothing, and i try pdanet+ too didn't work either. The usb mode does work. any solution ?
 

miggsr

Senior Member
Feb 3, 2011
1,476
1,546
Google Pixel XL
Google Pixel 2 XL
On the 3XL Crosshatch...I have been experiencing where the system will freeze can't tell if it's the UI or if it's just the OS and itself or if it's the Kernel although I have not changed anything and that aspect. No mods either just root. I mean question is if anyone else has experienced the same thing on Android 12 for 3XL. If so what was the last thing you did or changed that you began noticing the issue.
 

Attachments

  • Screenshot_20220110-142725_Wu.png
    Screenshot_20220110-142725_Wu.png
    123.2 KB · Views: 56
  • Screenshot_20220110-142711_Wu.png
    Screenshot_20220110-142711_Wu.png
    98.9 KB · Views: 56

HiDefHusker

Member
May 23, 2011
8
1
On the 3XL Crosshatch...I have been experiencing where the system will freeze can't tell if it's the UI or if it's just the OS and itself or if it's the Kernel although I have not changed anything and that aspect. No mods either just root. I mean question is if anyone else has experienced the same thing on Android 12 for 3XL. If so what was the last thing you did or changed that you began noticing the issue.
Yes, I've had it freeze 3-4 times since first installing it less than a week ago. The most recent time was immediately after answering a phone call.
 

HiDefHusker

Member
May 23, 2011
8
1
I have had this installed since November but the issue has been since Saturday same about 3-4 freezes. Had you installed any mods?
Rooted with magisk, but nothing else.

When the UI is frozen, the phone is still alive as I can still connect using adb.

Edit: attached list of running processes on my current freeze.
 

Attachments

  • ps.txt
    65.4 KB · Views: 6
Last edited:
Nov 9, 2014
12
0
Poweramp and before I start power amp display become black after two second of plug in adapter and after removing adapter it becomes normal again in two second .after that I tried some more test like play songs first then plug in reselt is black screen nither is vol up nor down ,if left In that state for 5-7 minutes then unplug display still black.have to restart, surprisingly power menu show up in both state , finger print also not working in black screen state
 

n2locarz

Senior Member
Running build 11-24 since early December , rooted with Magisk.zip - Not a single slow down and no freezes! Excellent build! I run a Verizon MVNE called Red Pocket. I keep losing mobile data and the APN magically changes to Straight Talk APN. Weird right? I manually select the Verizon APN and it works again. Happened 3 times now. Anyone else loose mobile data?
 

N5X_ita

Senior Member
Mar 20, 2016
68
18
Here to report a sudden freeze after a notification was shown during the standby: the phone freezes itself on the notification and it is not possible to interact with it.
 

iwannawave

New member
Apr 25, 2010
2
0
Poweramp and before I start power amp display become black after two second of plug in adapter and after removing adapter it becomes normal again in two second .after that I tried some more test like play songs first then plug in reselt is black screen nither is vol up nor down ,if left In that state for 5-7 minutes then unplug display still black.have to restart, surprisingly power menu show up in both state , finger print also not working in black screen state
I had the same issue with Spotify. I noticed that Spotify showed up in the recent apps tab right before the screen went black. Reinstalling Spotify fixed it. You might wanna try the same with Poweramp.
 

Top Liked Posts

  • There are no posts matching your filters.
  • 2
    @ReallySnow

    I am no expert in android custom rom development, if this is not the correct way do please forgive my shallow knowledge of android custom rom development.

    I have found from some website that to enable the VoLTE and VoWiFi in Pixel phone that not supported by the carrier the following properties should be included in build.prop for this phone to work.
    # Debug Options
    persist.dbg.ims_volte_enable=1
    persist.dbg.volte_avail_ovr=1
    persist.dbg.vt_avail_ovr=1
    persist.dbg.wfc_avail_ovr=1

    # Radio Options
    persist.radio.rat_on=combine
    persist.radio.data_ltd_sys_ind=1
    persist.radio.data_con_rprt=1
    persist.radio.calls.on.ims=1

    This rom is exceptional well built and i would like to keep using it. Hopefully you can help to enable the VoLTE and VoWiFi feature.

    Thanks.
    This method is useful for some carrier that cannot be modified by CarrierConfig👍
    2
    Yeah I should have mentioned I just installed it yesterday, 1/1/22. I'm still shaking it out to see what's what. I haven't found any problems at all. I would prefer more customization on the status bar, though I'm likely just spoiled coming from an Android Q PixelExperiencePlus ROM on the Pixel 2XL.
    just hang tight im sure once they make rom 100% stable they'll add the status bar mods
    1
    Many thanks @ReallySnow appreciate your effort making this possible.

    Finally rom installed without any issue.

    But i have a problem, IMS not registering causing VoLTE abd VoWiFi non-functional. Anybody experiencing this issue with this ???

    Please help. Thanks.
    Which operator?
    1
    @ReallySnow

    I am no expert in android custom rom development, if this is not the correct way do please forgive my shallow knowledge of android custom rom development.

    I have found from some website that to enable the VoLTE and VoWiFi in Pixel phone that not supported by the carrier the following properties should be included in build.prop for this phone to work.
    # Debug Options
    persist.dbg.ims_volte_enable=1
    persist.dbg.volte_avail_ovr=1
    persist.dbg.vt_avail_ovr=1
    persist.dbg.wfc_avail_ovr=1

    # Radio Options
    persist.radio.rat_on=combine
    persist.radio.data_ltd_sys_ind=1
    persist.radio.data_con_rprt=1
    persist.radio.calls.on.ims=1

    This rom is exceptional well built and i would like to keep using it. Hopefully you can help to enable the VoLTE and VoWiFi feature.

    Thanks.
    1
    Is there a way to change the level of haptics? It seems weaker than on a stock rom.
  • 19

    NFjZzFl.png

    PixelExperience for Pixel 3 / 3 XL [blueline/crosshatch]

    What is this?
    PixelExperience is an AOSP based ROM, with Google apps included and all Pixel goodies (launcher, wallpapers, icons, fonts, boot animation)

    Our mission is to offer the maximum possible stability and security, along with essential and useful features for the proper functioning of the device

    Based on Android 12



    Whats working?
    Wi-Fi
    RIL
    Mobile data
    GPS
    Camera
    Flashlight
    Camcorder
    Bluetooth
    FM radio
    Fingerprint reader
    Face unlock
    NFC
    Lights
    Sound/vibration


    Known issues
    Nothing yet
    You tell me

    DON'T FLASH GAPPS, THEY'RE ALREADY INCLUDED
    Download from PixelExperience website (blueline)
    Download from PixelExperience website (crosshatch)

    Donate
    Liked my work? Give me a beer

    Translation
    Help with project translation

    Stay tuned
    Our Telegram channel
    Our blog




    4
    Many thanks for bring PE to Pixel 3 XL.

    Hopefully it will be official.
    3
    Error 21 when sideloading the zip. TWRP also would not proceed past splash screen and other thread sources suggested recovery. Method I just tried:

    Recovery mode (Power + Volume down to enter Fastboot mode - volume keys to scroll and power button to select Recovery Mode - Power + Volume up (reovery mode shows after approx 10 seconds hold)) > Apply update from ADB > "adb sideload PixelExperience.zip"

    Running A12 already via OTA so attempting this really for the security patches. TWRP 3.5.2.10-0-crosshatch.img. ADB 31.0.3-7562133.

    Could I just dirty flash using another (earlier) verion of TWRP or do I actually need to wipe data/factory reset in recovery mode? Or am I missing something else entirely?
    use the lineage OS build of their recovery img, flash to the B slot "fastboot flash boot_b lineage_XXXX.img" then reboot to recovery. if it says signiture invalid, allow it, also it will DOWNGRADE to an older build of 12, so allow it (a timestamp error and lineage will warn you)
    3
    Hey guys, thinking about taking this build. Flashing custom roms for many years now and I'm shocked at the lack instructions for this one. Also, where are the links to the builds? Which TWRP - saying the latest??
    Don't use TWRP, get the lineage OS recovery image and flash it to slot B, then use it to adb sideload it, TWRP has some issues with Android 12. But Definitely use this ROM, stable, lighter and a bit better on app memory management, I'm currently running it on my daily device while I wait for my Z Fold 3 to come in. No bad bugs or crashes at all and its snappy.

    I'm sending this message from. My Pixel 3XL on Pixel experience 12 BETA (this ROM definitely does not seem like a beta, it's way too stable haha)
    3
    How do you compare this with stock on crosshatch?
    Same features, a bit smoother and better memory management. Most important for me is up to date security patches.
    Sorry for asking this as it seems I should probably a already know but....
    What is the procedure for fishing this?
    Is it a fastboot installation method?
    Or does it require a lineage boot image?
    Sorry if these questions are noobish.

    download latest twrp for crosshatch
    unlock your bootloader
    in your PC using fastboot: fastboot boot twrp.img
    in twrp, select adb sideload, connect phone to your PC
    in your PC using adb: adb sideload lineage.zip
    do not reboot, in twrp do a factory reset (it was probably already reset when unlocking bootloader)
    reboot
    done

    BTW safetynet and cts are ok using latest magisk stable, selecting all apps on magisk hide allowed me to use banking apps and microsoft intune portal