Development [ROM][12L][OFFICIAL] PixelOS [AOSP][STABLE][12/08/2022]

Search This thread

lawsangel

New member
Jul 20, 2022
4
0
Installed the ROM with the recommended version of twrp and firmware for sweetin and rooted with magisk agter setup. Everything works fine, safetynet checks but my fingerprint and face unlock works only with apps and not on my lockscreen. Please help.
I had a similar issue, reboot the phone, when it boots up, don't touch the finger print scanner, unlock with code.
Give the phone 30 seconds or so to boot, lock phone, finger print scanner then works.
I have to do that every so often.
 

DanteDeSalvator

Senior Member
Oct 21, 2017
161
54
Didn't work. Aryan suggested setting up the phone without Google restore. But that will mean I'll have to clean install all over again :( I was wondering if there was some easier method.
I had a similar issue, reboot the phone, when it boots up, don't touch the finger print scanner, unlock with code.
Give the phone 30 seconds or so to boot, lock phone, finger print scanner then works.
I have to do that every so often.
 

Termi92

Senior Member
Mar 8, 2011
83
21
Xiaomi Mi A3
The latest build (SQ3A.220705.003.A1 PixelOS_sweet-12.1-20220809-1026) has the same wakelock issue nv- mentioned in this post #418.
Passive drain is still an issue it seems.

Screenshot_20220811-054033_Battery Guru.png
 

laryhills

Member
Jun 16, 2021
13
1
Great work developers, the changlogs really does justice to pending issues, however I can't seem to perform the OTA update.
When I click restart to update it goes to an error page with the android logo
 

nv-

Member
Nov 25, 2010
15
17
Redmi Note 10 Pro
@Aryannn999 I see that You've disabled the SMP2P_SLEEPSTATE kernel module in the courbet-12.1 branch. Sadly it won't help for the deep sleep issue. After disabling the device still has mentioned problem - but this time I can't find responsible wakelock. All that I can see is the NETLINK with huge count (several hundred thousand) but the time itself was rather small. Conclusion is that my analysis was wrong. Something else is the real root cause, but at this point I don't know how can I determine it.
 

whiskeyjakc

Member
Apr 12, 2014
6
0
Been using this rom for about a month now and everything seems fine but I recently realised that the network drops even though it shows full coverage. I'll often get carrier messages that I've missed a call and when I try to call someone the it just says "call ended". I have to either put the phone on airplane mode for a while or restart it and then it works fine. I've tried two different sims so it's not a network issue. Happens multiple times a day and the worst part is you can't even tell when it's down because it shows full coverage and LTE all the time.
 

112.bkt

Senior Member
Feb 19, 2011
206
54
London
How do I turn off system update notifications I'm on the previous build and everything is good don't want to upgrade?
 

Ak2250

Member
Mar 20, 2022
11
3
I can't upgrade to the latest August update. It's saying error and it's restarting. Using pixel os recovery. Any help is appreciated.
 
Proximity sensor no work in whatsapp audios after last update. I should flash latest firmware xiaomi V13.0.12.0.SKFMIXM for update? The latest firmware that i flashed when i installed pixelos was V13.0.8.0.SKFMIXM. it's possible do this in a durty flash? I could do downgrade for previus version of pixelos?
 
Last edited:
Proximity sensor no work in whatsapp audios after last update. I should flash latest firmware xiaomi V13.0.12.0.SKFMIXM for update? The latest firmware that i flashed when i installed pixelos was V13.0.8.0.SKFMIXM. it's possible do this in a durty flash? I could do downgrade for previus version of pixelos?
Excuse, I just did a wipe cache by pixelos recovery and now proximity sensor work fine
 

lalitjangir_1071

New member
Apr 2, 2022
3
2
Hi.... I have been using PixelOS from a long time.... and I love this rom.... Great work dev.... But I would like to request one tiny little thing.... Can you please improve the sound output from the speakers .... I have been facing issues regarding the volume of the phone speaker.... It's not loud enough
.... Can you please make it as loud as miui.... I tried rooting it and tried some modules to increase the sound....but nothing worked out .... Please look into this dev....
 

Top Liked Posts

  • There are no posts matching your filters.
  • 2
    Faceing OverNight battery drain in my Note 10 Pro
    Try flashing the latest vantom kernel
    1
    Does any of you has a bug on fingerprint lock? Mine doesnt work
    1
    Just installed latest PixelOS. coming from latest MIUI13. A while ago I already was on PixelOS but changed back due to some issues.

    Battery life is great. Maybe its just me, but this what I did: Was on MIUI13 and still had OrangeFoxRecovery installed. I just downloaded latest PixelOS, put it on my SDCard. Reboot to recovery and erased Data, Dalvic Cache...everything including Cache.

    Skipped the part "Download the latest MIUI 13 firmware for your region"
    I dunno if this made the difference, but i thought: Im already on latest MIUI13, so why do this step?

    Just installed PixelOS, wiped data and rebooted. Installed at least 30 Apps, launcher and a few other things. Was on 73% before sleep. Left everything on: Bluetooth, Wlan, Mobile connection, GPS, NFC. Woke up 5 hours later, still on 72%.

    Perfect.
    1
    Does this require a fresh clean install or can you dirty flash from recovery?
    It's a kernel, you can just dirty flash it through recovery using adb
    1
    Which previous build are you using or would you recommend?
    Ud suggest something around april or may. This is the one, I didnt have problems with. Currently using latest build though and run into battery drain after 4 days of nothing. I think its due to mobile data or something. You could also try latest build and flash Vantom kernel as mentioned
  • 25
    latest.png

    PixelOS is an AOSP based ROM, with Google apps included and all Pixel goodies (launcher, wallpapers, themed icons, google sans fonts, Monet color based system wide theming, boot animation), a fork of OG Pixel Experience with improvements on the top of it. Huge respect to Pixel Experience team for their work, thanks to them for making this ROM possible.
    In short a fully functional Pixel Experience with just the right amount of essentials.

    Code:
    /* Your warranty is now void.
    *
    * I am not responsible for bricked devices, dead SD cards,
    * thermonuclear war, or you getting fired because the alarm app failed. Please
    * do some research if you have any concerns about features included in this ROM
    * before flashing it! YOU are choosing to make these modifications, and if
    * you point the finger at me for messing up your device, I will laugh at you.
    */

    Improvements over PixelExperience

    Device Specific Issues:
    • Slow motion in miuicamera

    Requirements
    • Flash the ROM only with PixelOS recovery or my builds of OrangeFox recovery or TWRP (My builds, not the official versions)
    • Flash the latest MIUI 13 firmware for your region

    Downloads
    Get the latest PixelOS Build for the Redmi Note 10 Pro/Max here
    Firmware for sweet https://xiaomifirmwareupdater.com/firmware/sweet
    Firmware for sweetin https://xiaomifirmwareupdater.com/firmware/sweetin
    Magisk (optional) https://github.com/topjohnwu/Magisk/releases
    PixelOS Recovery https://sourceforge.net/projects/pixelos-releases/files/twelve/sweet/recovery
    TWRP https://sourceforge.net/projects/twrp-releases/files/Sweet/
    OrangeFox Recovery https://sourceforge.net/projects/orangefox-releases/files/sweet

    Note: GApps are included, don't flash separately.

    Notes
    • Encryption is enabled by default
    • SELinux is enforcing
    • MIUICamera from the latest MIUI release is included
    • VantomKernel is the default kernel
    Flashing Instructions
    Clean flash (coming from a different ROM):

    • Download the latest MIUI 13 firmware for your region
    • Download the ROM from the link above
    • Download Magisk v25.2 (optionally)
    • Reboot to recovery
    • Flash the latest MIUI 13 firmware for your region
    • Flash the ROM
    • Format data
    • Reboot and voila!
    • To get root access, reboot to recovery after ROM setup and flash magisk.

    Updating to a newer build (dirty flash):
    • Flash ROM zip and magisk (optional)
    • Wipe cache and dalvik (optional, recommended)
    • Reboot and voila!

    Join our Telegram Group https://t.me/aryanschat
    Buy me a Coffee https://paypal.me/whyredfire

    Source Code
    PixelOS http://github.com/PixelOS-Pixelish
    Device Tree and Vendor Tree https://github.com/PixelOS-Devices
    Kernel Tree https://github.com/PixelOS-Devices/kernel_xiaomi_sm6150 (courbet-12.1 branch)

    ROM OS Version: Android 12L.
    ROM Kernel: Linux 4.14.290
    Stable Release Date: 12 August 2022
    Latest Release Date: 12 August 2022
    8
    1660314619088.png

    The PixelOS August update is here.

    Downloads and changelogs can be found here

    Seen a few of you who had issues with smp2p_sleepstate. Should be fixed in this build. Enjoy!
    6
    On my device I've found that sometimes my phone wasn't going to deep sleep because of smp2p_sleepstate wakelock.
    I've decided to disable this kernel module and see what happens. I'm using this configuration since few days and I'm rather happy with the results - I don't see any regressions after disabling the module and my battery drain issue is solved. At least from this particular reason.

    So I'd like to share the build.

    As always, You're flashing this at your own risk. I don't know if this will work on any other rom than PixelOS (most probably will work. I'm not sure about miui based roms. Feel free to try).

    It's regular Vantom kernel, compiled with latest commit 3c6e92509e0ad1aca8419db926b2cc82b1c5acb1 (HEAD -> courbet-12.1, origin/courbet-12.1).
    Following changes have been made in comparing to defconfig:
    Diff:
    1c1
    < CONFIG_LOCALVERSION="-VantomKernel"
    ---
    > CONFIG_LOCALVERSION="-VantomKernel-Cthulhu-fhtagn"
    55c55
    < CONFIG_LTO_CLANG=y
    ---
    > CONFIG_LTO_NONE=y
    702c702
    < CONFIG_QCOM_SMP2P_SLEEPSTATE=y
    ---
    > CONFIG_QCOM_SMP2P_SLEEPSTATE=n


    For best results use this with Naptime app and Google play services doze option checked.
    6
    Quick hotfix update for the July patch as I wasn't sure if we would have another Android 12 release as 13 is right around the corner.

    You can download the build on the website now https://pixelos.vercel.app/download/sweet
    A mirror for the build can be found here.

    Changelog:
    - Always on Display and Ambient Display will now run at 60hz
    - Fixed an issue with the microphone being too quiet in some apps
    - Fixed an issue where the google recorder didn't want to work for some users
    - Import the new display calibration file from MIUI V13.0.10.0.SKFEUXM
    - Update the s5kgw3 camera libraries from MIUI V13.0.5.0.SKFINXM
    - Imported a few missing display blobs
    - Address Xiaomi's displayfeature & citsensorservice denials
    - Enable 24-bit audio for primary output and deep buffer
    - Added high touch polling rate
    - Disabled IORAP
    - Updated the Adreno stack
    - Possibly fixed some issues with smp2p-sleepstate
    - Disabled CFI due to causing issues regarding performance
    - Upstreamed kernel to 4.14.288
    - Other improvements and changes
    5
    So does PixelOS Recovery support data decryption? It's a little hard to tell from this wording (since it is also by definition a custom recovery).

    And if it does, is there a way to use it to mount decrypted /data and tar its contents up, with SELinux labels etc.? I'm willing to get my hands very dirty if it means I can avoid setting up the phone by hand again.
    Hello, I've compiled a TWRP build that supports decrypting /data on Android 12 as well as supporting EROFS. It's a very early build but it does the job and I haven't run into any issues here. Enjoy!