Development [ROM][13.0.0_r41]StagOS 13.1[cheetah][OFFICIAL][25/04/2023]

Search This thread

justin333

Member
Sep 19, 2017
19
4
I mean it is possible, but I would refrain for two reasons
1. I am not knowledgable enough to properly do it
2. Would much rather not mess with things and wait for an official update from google which update modem and radio.
I think you should give it a shot. I will tell you why!

1 : Hardware already supports this and there are ways to enable this. Please check this below link below : https://xdaforums.com/t/root-enable-5g-volte-and-call-screening-in-unsupported-countries.4510243/

2 : This will be a cool feature to add on to this great ROM.
 

mad4some

Senior Member
Dec 10, 2012
665
207
East TN
Magisk Zygisk issue.

Has anyone else root device with magisk 25.2
root works well
if enable zygisk support phone will not boot
stuck on Stag boot logo
I too experienced this bootloop, and I had read your post but toggled zygisk without thinking :rolleyes:. Since 25.2 works everywhere else I use it, I imagine it is a problem with the rom..... @pranavasri, any thoughts on this?

EDIT: Nevermind, after reading thru the OP in this thread: https://xdaforums.com/t/tutorial-magisk-enabling-32-bit-support-for-apps.4521029/unread, I see that since Dec stock update Zygisk is broke for everyone. :cool:
 
Last edited:

pranavasri

Senior Member
Nov 13, 2015
390
957
Hyderabad
OnePlus Nord
OnePlus 9 Pro
It is my understanding that StagOS features a recovery image something akin to TWRP? If so, is there a way to extract and flash just the recovery portion?
To the best of my knowledge, just flashing vendor_boot to both your slots through fastboot should give you the recovery. This can be extracted from rom zip. Keep the following in mind tho
1. Your existing rom might not both after that (as we are not exclusively flashing recovery)
2. If you flash another rom, this will get over written by that ROM's implementation.

Hence not worth the process to individually flash it.
Although if you do flash stag, it'll be your recovery by default :p
 
  • Love
Reactions: nooted1

robroy90

Senior Member
Oct 22, 2006
331
48
Roll Tide
Samsung Galaxy Note 9
To the best of my knowledge, just flashing vendor_boot to both your slots through fastboot should give you the recovery. This can be extracted from rom zip. Keep the following in mind tho
1. Your existing rom might not both after that (as we are not exclusively flashing recovery)
2. If you flash another rom, this will get over written by that ROM's implementation.

Hence not worth the process to individually flash it.
Although if you do flash stag, it'll be your recovery by default :p
Thank you for the details. Do you have info on what StagOS Recovery is based on? Are there screenshots of it? It it inspired by or does it use code from TWRP? I just want to confirm it does indeed provide the ability to perform a full image backup of the device and give you the ability to restore it? I am really wanting the capability to back up more than just apps and data.
 

AnierinB

Retired Recognized Developer
@robroy90
"Thank you for the details. Do you have info on what StagOS Recovery is based on? Are there screenshots of it? It it inspired by or does it use code from TWRP? I just want to confirm it does indeed provide the ability to perform a full image backup of the device and give you the ability to restore it? I am really wanting the capability to back up more than just apps and data."

Likely LOS recovery, which is based on AOSP recovery.
 
  • Like
Reactions: nooted1

kaadaj

Senior Member
Jun 8, 2018
71
28
Hi!

First thanks a lot to the OP for this rom, it's so smooth and customisable I love it ! It's been a very long time that I didn't install any custom ROM, it brings back old memories.. I use to install custom ROM, root, and brick all of my phones back in the days ahah

Can someone tell me it's experience with root on this rom ? I'm interested in rooting just to install kirisakura kernel and it's power hint magisk module. I'd like to keep gpay working, so I understood that I'd need to use zygisk to do so, but it seems to be broken unfortunately. Am I right ? Has anyone been able to root and hide gpay properly to get it working with this rom?

Thanks !
 
  • Like
Reactions: pranavasri

mad4some

Senior Member
Dec 10, 2012
665
207
East TN
Is there no monet settings or custom color settings included in this? (I think I've looked everywhere), or is the attached pic all there is? Seems odd...
 

Attachments

  • Screenshot_20230130-121933 (Medium) (Small).png
    Screenshot_20230130-121933 (Medium) (Small).png
    53 KB · Views: 61

mad4some

Senior Member
Dec 10, 2012
665
207
East TN
It says Monet in your screenshot. Last option. Not sure what you mean?
Those are each just a preset, there is no place to pick your own colors. Usually there is "Wallpaper and Style" settings for this....

EDIT: OK, I just found that it is there under "Wallpaper" settings. It's hidden among all the other choices for wallpaper source, never seen it there before! Profit!!
 
Last edited:
  • Like
Reactions: Slim2none4u

nooted1

Senior Member
Jul 18, 2015
92
111
Amazon Fire TV
Samsung Galaxy S8
To the best of my knowledge, just flashing vendor_boot to both your slots through fastboot should give you the recovery. This can be extracted from rom zip. Keep the following in mind tho
1. Your existing rom might not both after that (as we are not exclusively flashing recovery)
2. If you flash another rom, this will get over written by that ROM's implementation.

Hence not worth the process to individually flash it.
Although if you do flash stag, it'll be your recovery by default :p
Not sure how exactly, but I managed to flash Calyx and stock and it maintained Stag recovery without me even trying. I don't mind, it's my favorite recovery right now anyway since you took out the annoying signature warning.
 
  • Like
Reactions: pranavasri

nooted1

Senior Member
Jul 18, 2015
92
111
Amazon Fire TV
Samsung Galaxy S8
I too experienced this bootloop, and I had read your post but toggled zygisk without thinking :rolleyes:. Since 25.2 works everywhere else I use it, I imagine it is a problem with the rom..... @pranavasri, any thoughts on this?

EDIT: Nevermind, after reading thru the OP in this thread: https://xdaforums.com/t/tutorial-magisk-enabling-32-bit-support-for-apps.4521029/unread, I see that since Dec stock update Zygisk is broke for everyone. :cool:
That can't possibly be true. I'm on January stock ROM using Zygisk via the modded Magisk Delta build from that thread without any issues whatsoever.
 

Top Liked Posts

  • There are no posts matching your filters.
  • 30
    8d3d049e47b6816f64ba2043782ae285.jpg

    Hey another day another rom, that's what you might be thinking. but we at stag aim towards elegance. We are learners just like everyone out there, This is small project we have started which helps us learn every single day. Why Stag, you might question, my answer would be why not. After all Harry's patronus was a stag(pun intended). After having a couple of iterations, we still intend to stick to our roots, and keep refining what we have. With Android 13, Stag would still be aiming at an elegantly beautiful close to stock experience, that satisfies just the features and customisations you'd crave for (nothing more, nothing less), at the same time being blazing fast and silky smooth. You'll have to try it to believe it .

    ~Sic Parvis Magna~

    PS: for people wondering what sic parvis magna is, it translates to great endings from small beginnings, Something i picked up while playing a game.

    Code:
    /*
    
    * Your warranty is now void.
    
    *
    
    * I am not responsible for bricked devices, dead SD cards,
    
    * thermonuclear war, or you getting fired because the alarm app failed. Please
    
    * do some research if you have any concerns about features included in this ROM
    
    * before flashing it! YOU are choosing to make these modifications, and if
    
    * you point the finger at me for messing up your device, I will laugh at you.
    
    */

    This is a very initial stage build, bugs are to be expected. Although so far in testing we did not find anything major and you will be flashing the build of your own accord.
    I am planning to have super frequent releases of A13 beta, and soon it will be the stag you know and love (it's super stable already)

    Downloads

    Incremental
    Pristine Incremental: [NA]
    Gapps Incrementa: [NA]

    Full Zips
    Pristine Build - Non Gapps: Download Here
    Gapps Build: Download Here

    Installation

    Please follow the instructions properly.
    (If you face issues with installation, restore using fast boot. These are initial builds and anything can happen)
    **Make sure your boot loader is unlocked, and that you are on April firmware**

    Reboot to bootloader
    Use the following command to flash boot.img to both slots
    Format Data (Not needed if updating from January Build)
    Code:
    fastboot -w
    Run the following command
    Code:
    fastboot update romname.zip


    What's Working
    1. Camera, FP, BT, NFC, Calls, Data all the major stuff working pretty well​
    Bugs
    1. You tell me :).​
    Misc
    All extra info will be slowly updated over time and will be readily available by the time of official release.
    All this said, the build has been pretty great so far so I hope all you you have a blast trying it out.

    Sources

    ROM

    Kernel

    Device Tree


    I work on this project as a hobby, and the money for the servers completely go out from my pocket.
    If you like my work it'd be great if you could: https://buymeacoffee.com/vjspranav
    I would really appreciate it.
    Thanks and hope you enjoy the build

    ROM OS Version: Android 13.0
    ROM Kernel: Linux 5.10.107
    Based On: AOSP

    Version Information
    Status:
    OFFICIAL
    Current Build Version: 13.1
    Build Release Date: 2023-04-25
    15
    Changelog - 24042023

    Bonjour, A long time due update is finally out. The march update by google was a huge pain, I had to completely re work the source and had a lot of personal issues. Hence I had to skip march release, and are soo late into april as well. I'll really try my best to provide all further updates on time (or much ahead). With all the rambling aside, this update will not look much, but trust me someone once said: "it's not what's on the outside that matters, it's what's on the inside that does". And inside the source there have been a tremendous amount of changes and people who tested the build are in love with it, so what exactly does it bring to plate ? Read on:

    Device Specific
    1. Updated to April Firmware
    2. Some Unsupported regions (India) should have 5g working now.
    3. Enabled CLO boost framework, makes the device much smoother.
    4. Now Playing works just like on pixel (even on lockscreen)


    Source
    1. Feb -> April patch. We are on the latest patch by google, CTS passes OOTB!
    2. One downgrade is the removal of battery styles, they will be right with you by may release.
    3. We revamped the Recents UI slightly, looks more like OOS now.
    4. A very small touch is the addition of clear all sound, I personally find it very satisfying. The swoosh that OOS clear all makes, now Stag does too, you'll absolutely love it.
    5. Added a feature called re-ticker. For anyone who's used a samsung phone might be able to relate. It's a OneUI style pill shaped notification.
    6. Added notification clear all button styles
    7. Finally App Lock and hide apps from launcher, super helpful features!!
    8. Revamped resolution selector
    9. A new settings UI (can be enabled with a toggle)

    That's about all I have on the feature front, but you'll be lost scrolling and using the latest and greatest of Stag.
    Until next time.


    Changelog - 28022023
    Hola people, Hope you have been loving the previous stag release, I have heard feedback, and there's some serious changes in this build! Keep reading to find out. LTO
    Build is based on February Security patch by the way and passes CTS out of the box :).

    Changes
    1. In continuation to last build, we have done major launcher re work, I could write a complete changelog just stating the launcher changes itself, but I'll leave it to you guys to figure it out.
    2. A few notable changes, revamped recents menu, added memory info to recents. Shhh.. No more spoiling.
    3. We now build using Global ThinLTO. Keeping it simple, it means that performance will go vrooom.
    4. Now you have chance to use the updated security menu in settings straight from pixel (only on GAPPS builds)
    5. This is a hot cake, now you can choose which side you want your volume panel in landscape as well. I understand some people find it comfortable on the right on landscape, this one's for you.
    6. Like QPR2? Me too, hence now we have the QS panel from QPR2, nothing major, just a very smooth and soothing clock expand animation.
    7. Not everyone is a fan of two column layout of QS Tiles, we now have added row and column count customisation, along with being able to hide labels!!!
    8. Now you can also hide if you don't want to see your daily data usage, hide that guilt XD.
    9. Added music pulse. NavBar/lockscreen/ambient music visualiser.
    10. Also added edge light for notification.
    11. Added support for toggling status bar icons.
    12. As a consequence of above, a dynamic VoLTE, and a VoWiFi icon implementation which can be turned off!
    13. Added a fix to IMS, which avoids showing carrier name under internet tile twice, for example, "JIO - Jio".
    14. A lot of under the hood performance and visual improvements, to make sure that stag flies hehe!!

    This is a decent sized feature update, and I'm positive you guys will more than love it.
    Looking forward to your responses
    Until next time!

    Changelog - 12022023
    Hey guys, February's here and as owners of Pixels it would suck not being able to have February patch already don't you agree? So this here is a very quick update with a small but very useful changes and of course with February patch

    Fixes
    1. Safety Net/CTS/Integrity passes directly without having to root or flash any module (only for gapps build), enjoy as good as stock experience with this too.
    2. Now you can sucessfully update play updates from security settings (which used to fail till previous build)
    3. Fixed some rare cases where screenshot crashes

    Changelog
    1. February security patch
    2. Added Fingerprint icon and animation customisations (it's super fun)
    3. Moved to aosp launcher in gapps build as well, no more hassle of pixel launcher. You feel a feature is missing, just ping me and you'll find it in the next release :).
    4. Added a toggle to enable unlimited photos storage (use at your own risk)
    5. Added a toggle to spoof games allowing higher refresh rates (yes we rock!)
    6. Updated blobs from pixel february update

    There's a lot more features in line and you are going to love them!!
    We'll have another release soon and in the meantime you would love all the goodness this build brings!!

    Cheers and Regards

    Changelog - 19012023
    Hey guys, this is a quick update build. We were already on January patch, but with this release we update to January FW as well. I am working on feature list and it will be updated in a day or two. In the meanwhile here you go:

    Fixes
    1. Fixed the rare case where FP didn't work.

    Changes
    1. Updated to Jan FW
    2. Added support for FaceUnlock (thanks to @Hurt Copain for helping and Anay Wadhera for impl)
    3. Moved to Via Browser for Pristine Builds.
    4. Added support for 32 bit app installation.

    This is a small changelog but with some important changes. Hope you have an amazing time using the build

    Cheers
    13
    I would very much welcome an update to March due to the Exynos vulnerability
    The march update (QPR2) has been quite a pain, on top of that I had some personal issues due to which I couldn't really work on Stag. I am trying my best to push out a good build soon!
    12
    Build with February patch released, it's smoother than you remember it and better than before.
    Changelog in 2nd post. OP updated with download links
    Hope you enjoy the build!!

    ~Sic Parvis Magna~
    11
    A new release is out, changelog is updated, and download links can be found in OP.
    Major thing to note, now playing works like a charm now,
    Even bluetooth calling should have been fixed :)
    Clean flash is required.

    Hope you enjoy the build