Development [ROM][13.0][OFFICIAL] Awaken OS [lisa]

Search This thread

saikiran001

Senior Member
Apr 20, 2017
225
1,575
Vizag
Xiaomi Mi Pad 5
Xiaomi 11 Lite 5g NE
BIqWutQ.png

awakenOS for Xiaomi 11 Lite 5G NE [lisa]

Code:
#include <std_disclaimer.h>
/*
* Your warranty is void. Or...Valid? Probably?
*
* Project Awaken and its maintainers are not responsible for bricked devices,
* dead SD cards, data loss, thermonuclear war, or economic crisis caused by
* Awaken OS. YOU are choosing to make these modifications, and if you
* point your finger at me for messing up your device, I will laugh at you.
*/

3iH8AJV.png

Born different, now awaken.
Awaken OS brings consistent, fluent and smooth experience with all your must-have customizations, for you, for the community, for everyone.

- Project Awaken Team -
Saikiran [Founder & Lead Developer]
Ninad Patil [Lead Developer]
Mukul [Developer]
Hugwalk [Lead Designer]
Jagadish [Designer]
Glitch [Designer]

Find us on Telegram! @AwakenOSNews


Tph095T.png

Display
Fonts, Icon shape & Icon pack customizations

Gestures
Advance reboot menu
Double tap to sleep and wake
Navbar customizations
Three finger screenshot
Toggle torch when screen off

Lockscreen


Notification


Pixel Features

Smartspace

Quick Settings
Brightness slider customizations


Security


Sounds

Cycle through ringer modes
Increasing ring volume
In-call vibration
Link ring and notification volumes

Statusbar
4G instead of LTE
Small mobile type icon


1XvkK8J.png

You tell

SiChjTP.png

First Time Install / Clean Flash
- Before proceeding any further, make sure you have downloaded all the files required for successful installation i.e., ROM zip (awaken-*.zip), boot.img, vendor_boot.img, firmware from the download links below.
- ROM zip, boot.img, vendor_boot.img are available in Download folder of the ROM.
1. Reboot to bootloader (fastboot)
2. Connect your phone to PC
3. fastboot flash boot boot.img
4. fastboot flash vendor_boot vendor_boot.img
5. fastboot reboot recovery
6. Select Wipe data/factory reset & confirm
7. Go back and select Apply update from ADB
8. adb sideload awaken*.zip(or drag down the rom zip to cmd)
9. adb sideload firmware*.zip (only if there's a firmware update)
10. After installation complete, Reboot system. #beAwakened

Update / Dirty Flash
1. Download proper flashable ZIP for your device
2. Reboot to Recovery
3. Select Apply update from ADB
4. adb sideload awaken*.zip(or drag down the rom zip to cmd)
5. adb sideload firmware*.zip (only if there's a firmware update)
6. Reboot to System and #beAwakened



Download Here / Official Announcement / Official Community
Kernel Source / Source Code


Download Firmware

Contributors
@saikiran001, @uchihasushmit

ROM OS Version: Android 13
ROM Kernel: Linux 5.4.x
ROM Firmware Required: Unlocked bootloader, Latest firmware, Above mentioned recovery
Based On: AOSP

Version Information
Status
: Stable
Current Stable Version: 3.9
Stable Release Date: 2023-08-20

Created: 2022-10-18
Last Updated: 2023-08-20
 
Last edited:

illogiK12

Member
Oct 26, 2022
11
4
hello great rom loving it so far, i just have a slight problem trying to install magisk through recovery but every attempt has failed with error status 12 7 idk what that means pls help
 

InvisibleKiller

Senior Member
Jun 9, 2022
51
7
Xiaomi 11 Lite 5g NE
hey bro how did you fix it ?
I had to install the OS, then install the Magisk app and copy the boot.img file to the phone then use Magisk to manually patch the boot.img, copy that newly patched for 6 back to the PC, then replace the original boot.img with the patched one and then finally wipe and reinstall from scratch using the patched file
 
  • Like
Reactions: illogiK12

Top Liked Posts

  • There are no posts matching your filters.
  • 1
    I can confirm that the battery is draining fast and also in idle state. I literally charge my phone 2-3 times a day.
    There is an annoying issue with the. Screen doesn't turn ON upon pressing power button. Only turns on after 4,5 button pressing. And it doesn't just happen occasionally. Happens all the time. Like literally 100 % of the time.
    And if you have finger print setup, only unlocking sounds is heard and the screen doesn't turn ON.
    I tried reflashing (that is all I know and can do as I'm not a developer) but, the issue persists
    Before reporting this issue here I also tried to switch to another rom and switch back to awaken and the issue still persisted. So, from my side it is something that counts as a serious bug. Please look into this.

    Secondly, power consumption on idle state is quite high. Went from 100 to 83 within whole night. Spotify was in background(in the recents) but, wasn't playing any music. It could be DC dimming because I turned it ON. But given that the phone's screen was off the whole night, DC dimming shouldn't matter much. Just thought you need to hear because power consumption also matters for most of us. Sorry for I couldn't provide screenshots of the battery stat so, my claims may seem invalid. I just can't go back to awaken just to take the battery stats because the first issue I mentioned is so annoying and prevents me from doing anything efficiently.
  • 8
    BIqWutQ.png

    awakenOS for Xiaomi 11 Lite 5G NE [lisa]

    Code:
    #include <std_disclaimer.h>
    /*
    * Your warranty is void. Or...Valid? Probably?
    *
    * Project Awaken and its maintainers are not responsible for bricked devices,
    * dead SD cards, data loss, thermonuclear war, or economic crisis caused by
    * Awaken OS. YOU are choosing to make these modifications, and if you
    * point your finger at me for messing up your device, I will laugh at you.
    */

    3iH8AJV.png

    Born different, now awaken.
    Awaken OS brings consistent, fluent and smooth experience with all your must-have customizations, for you, for the community, for everyone.

    - Project Awaken Team -
    Saikiran [Founder & Lead Developer]
    Ninad Patil [Lead Developer]
    Mukul [Developer]
    Hugwalk [Lead Designer]
    Jagadish [Designer]
    Glitch [Designer]

    Find us on Telegram! @AwakenOSNews


    Tph095T.png

    Display
    Fonts, Icon shape & Icon pack customizations

    Gestures
    Advance reboot menu
    Double tap to sleep and wake
    Navbar customizations
    Three finger screenshot
    Toggle torch when screen off

    Lockscreen


    Notification


    Pixel Features

    Smartspace

    Quick Settings
    Brightness slider customizations


    Security


    Sounds

    Cycle through ringer modes
    Increasing ring volume
    In-call vibration
    Link ring and notification volumes

    Statusbar
    4G instead of LTE
    Small mobile type icon


    1XvkK8J.png

    You tell

    SiChjTP.png

    First Time Install / Clean Flash
    - Before proceeding any further, make sure you have downloaded all the files required for successful installation i.e., ROM zip (awaken-*.zip), boot.img, vendor_boot.img, firmware from the download links below.
    - ROM zip, boot.img, vendor_boot.img are available in Download folder of the ROM.
    1. Reboot to bootloader (fastboot)
    2. Connect your phone to PC
    3. fastboot flash boot boot.img
    4. fastboot flash vendor_boot vendor_boot.img
    5. fastboot reboot recovery
    6. Select Wipe data/factory reset & confirm
    7. Go back and select Apply update from ADB
    8. adb sideload awaken*.zip(or drag down the rom zip to cmd)
    9. adb sideload firmware*.zip (only if there's a firmware update)
    10. After installation complete, Reboot system. #beAwakened

    Update / Dirty Flash
    1. Download proper flashable ZIP for your device
    2. Reboot to Recovery
    3. Select Apply update from ADB
    4. adb sideload awaken*.zip(or drag down the rom zip to cmd)
    5. adb sideload firmware*.zip (only if there's a firmware update)
    6. Reboot to System and #beAwakened



    Download Here / Official Announcement / Official Community
    Kernel Source / Source Code


    Download Firmware

    Contributors
    @saikiran001, @uchihasushmit

    ROM OS Version: Android 13
    ROM Kernel: Linux 5.4.x
    ROM Firmware Required: Unlocked bootloader, Latest firmware, Above mentioned recovery
    Based On: AOSP

    Version Information
    Status
    : Stable
    Current Stable Version: 3.9
    Stable Release Date: 2023-08-20

    Created: 2022-10-18
    Last Updated: 2023-08-20
    1
    What are some of the advantages of using this rom instead of pixelOS? I mean both are based on stock android, but what are some of the differences?
    1
    hey bro how did you fix it ?
    I had to install the OS, then install the Magisk app and copy the boot.img file to the phone then use Magisk to manually patch the boot.img, copy that newly patched for 6 back to the PC, then replace the original boot.img with the patched one and then finally wipe and reinstall from scratch using the patched file