[ROM][13.0][OFFICIAL][Rolex/Riva] crDroid 9.x

Search This thread

iusmac

Senior Member
Feb 26, 2022
93
62
BE3pE0l.png

Code:
*** Disclaimer ***
I am not responsible for any damage you made to your device.
You have been warned.


crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today.


Features:
https://github.com/crdroidandroid/crdroid_features/blob/13.0/README.mkdn

Extra features (implemented by the maintainer):
Code:
* Ability to disable touchscreen buttons
* Audio amplification
* Bluetooth aptX codec
* Clear Speaker
* Improved battery saver at kernel level
* LED indicator on offline charging (red when 0-99%, off when 100%)
* Mi Sound Enhancer
* Properly calibrated sensor-based Doze mode
* Smart Charging
* Native support for "Ok Google" hotword feature
* Native support for Google Phone call recording
* FMRadio (width RDS support)
* Ability to reboot to Fastboot
* Battery-friendly pocket mode

⚠️Stock kernel replacement will break some of the above features (ex. Ability to disable touchscreen buttons)

Flashing Instructions:

Pre-installation:

First time installation (Non-standard - read):
  1. Install OrangeFox recovery from the "Pre-installation" section or any other recovery with FBE encryption support
  2. Download the latest crDroid ROM & the latest Gapps package (Optional)
  3. Boot into recovery
  4. Perform a wipe of
    1. Dalvik / ART Cache
    2. System
    3. Vendor
    4. Cache
  5. Format data is MANDATORY using OrangeFox recovery (or any other recovery with FBE encryption support)
    💡Note: if you upgrading from crDroid 8, you only need to wipe data.
  6. Flash crDroid ROM
    ⚠ The ROM is encrypted by default. This is a crDroid requirement! ⚠
    If you don't care about encryption, you can disable it within OrangeFox recovery: demonstration (you should see "Disable FBE" button instead)
    💡 Note: encrypting via ROM's settings is no longer supported in Android 13+, so you will not be able to enable encryption in any other way (except clean install or as shown in the demo above).
  7. Flash Gapps [NikGapps T ARM64-Core] (Optional)
  8. Flash Magisk Root (Optional)
  9. Reboot to the system

Update installation (OTA): check Settings > System > Updater

Update installation (Local Update): check Settings > System > Updater > Three dots > Local Update

Update installation (Recovery):
  1. Download the latest crDroid ROM
  2. Reboot to recovery
  3. Flash crDroid update
    💡 Note: read recovery logs and make sure Gapps and/or Magisk have restored themselves.
  4. Wipe Dalvik / ART Cache
  5. Reboot to the system


Sources:
ROM: https://github.com/crdroidandroid
Kernel: https://github.com/crdroidandroid/android_kernel_xiaomi_rova

Download:
ROM https://crdroid.net/rova/9
Changelog: See here
Known issues:
You tell me ;)


Visit official website @ crDroid.net
crDroid rova Telegram
crDroid Community Telegram
crDroid Updates Channel
Donate to help our team pay server costs
 

Attachments

  • Screenshot_20221030-185618_Settings.png
    Screenshot_20221030-185618_Settings.png
    157.7 KB · Views: 1,485
  • Screenshot_20221030-193530_Camera.png
    Screenshot_20221030-193530_Camera.png
    68.1 KB · Views: 847
  • Screenshot_20221030-193526_Camera.png
    Screenshot_20221030-193526_Camera.png
    193.2 KB · Views: 751
  • Screenshot_20221030-193523_Camera.png
    Screenshot_20221030-193523_Camera.png
    25 KB · Views: 725
  • Screenshot_20221030-193513_Camera.png
    Screenshot_20221030-193513_Camera.png
    179 KB · Views: 748
  • Screenshot_20221030-193440_Settings.png
    Screenshot_20221030-193440_Settings.png
    213.5 KB · Views: 797
  • Screenshot_20221030-192202_crDroid Home.png
    Screenshot_20221030-192202_crDroid Home.png
    989 KB · Views: 850
  • Screenshot_20221030-191652_FM Radio.png
    Screenshot_20221030-191652_FM Radio.png
    126.3 KB · Views: 850
  • Screenshot_20221030-191632_FM Radio.png
    Screenshot_20221030-191632_FM Radio.png
    54 KB · Views: 850
  • Screenshot_20221030-191130_Settings.png
    Screenshot_20221030-191130_Settings.png
    63.7 KB · Views: 839
  • Screenshot_20221030-190957_Advanced settings.png
    Screenshot_20221030-190957_Advanced settings.png
    111.4 KB · Views: 816
  • Screenshot_20221030-190919_Advanced settings.png
    Screenshot_20221030-190919_Advanced settings.png
    64.4 KB · Views: 812
  • Screenshot_20221030-190626_Advanced settings.png
    Screenshot_20221030-190626_Advanced settings.png
    38.4 KB · Views: 838
  • Screenshot_20221030-190623_Advanced settings.png
    Screenshot_20221030-190623_Advanced settings.png
    39.2 KB · Views: 844
  • Screenshot_20221030-190611_Settings.png
    Screenshot_20221030-190611_Settings.png
    94.5 KB · Views: 864
  • Screenshot_20221030-190550_Settings.png
    Screenshot_20221030-190550_Settings.png
    105.9 KB · Views: 912
  • Screenshot_20221030-190538_Settings.png
    Screenshot_20221030-190538_Settings.png
    111.4 KB · Views: 921
  • Screenshot_20221030-185937_Settings.png
    Screenshot_20221030-185937_Settings.png
    106.4 KB · Views: 972
  • Screenshot_20221030-185758_Settings.png
    Screenshot_20221030-185758_Settings.png
    69 KB · Views: 1,120
  • Screenshot_20221030-185448_crDroid Home.png
    Screenshot_20221030-185448_crDroid Home.png
    565.3 KB · Views: 1,305

iusmac

Senior Member
Feb 26, 2022
93
62
crDroid 9 Update
- Upgraded kernel to 4.9.331-3.1-iusmac
- Added more DNS providers
- Hotspot: added ability to hide SSID
- Updated translations
- Fixed Bluetooth calling
- XiaomiParts:
* Added back Dirac tile to quick settings
* Added Dirac logo to Dirac settings
* Added Mi logo to all XiaomiParts features
- Removed debris and reduced ROM size
- Fixed PowerOffAlarm
(!) only stock Clock app can set PowerOffAlarm
- Set full device name for MTP USB & Bluetooth
* will show for ex. Xiaomi Redmi 4A not Redmi 4A
- Optimized graphics render engine
 
  • Like
Reactions: LIONS1

iusmac

Senior Member
Feb 26, 2022
93
62
thanks, can we just upgrade from v8 without losing data and apps?
You can try, but on first strange behavior, you can't really complain about it here. I highly recommend to always clean flash when changing android version. In case of cr8 -> cr9, you don't need to format data, just wipe it.
 
  • Like
Reactions: LIONS1

iusmac

Senior Member
Feb 26, 2022
93
62
crDroid 9 Update
- Synced with crDroid 9.0 sources (November security patches).
- Added FaceUnlock support
- Added option to disable clipboard overlay
- Launcher: switched to build-in iconpack for themed app icons
- Updated translations
- Upgraded kernel to 4.9.332-3.2-iusmac
- Optimized graphics render engine
- Added multiple vibration intensity levels
 

iusmac

Senior Member
Feb 26, 2022
93
62
crDroid 9 Update
- Upgraded kernel to 4.9.333-3.3-iusmac
- Smart charging:
* Added ability to close notification until next re-plug
* Fixed deep sleep being affected once "Stop trigger" is reached
* Added max. current intensity (up to 2A) setting while charging
* Added illustration logo
- Added Sensor block per-package feature
- Rounded all corners on QSS footer
- Added face unlock to camera indicator exemptions
- Fixed bouncing slider on brightness QS
- DeskClock: fixed no alarm audio when setting
"Gradually increase volume" option
- Launcher3: Updated themed icons
- Themes: Fixed switch accent colors not showing up
- Added vibration patterns from OOS
- Fixed QR Scanner QS tile
- Added toggler for floating rotation button
- Updated Chromium Webview to 107.0.5304.105
- Updated arm-optimized-routines
- Optimized overall performance
- Updated translations
 

iusmac

Senior Member
Feb 26, 2022
93
62
crDroid 9 Update
- Synced with crDroid 9.0 sources (December security patches).
- Upgraded kernel to 4.9.336-3.5-iusmac
- Added Google Settings Intelligence app prebuilt
* adds some features
* fixes crashes after reboot
* allows to search XiaomiParts features in Settings
- Fixed inaccurate touchscreen interruption in-pocket mode after touchscreen
driver downgrade from k3.18
- Fixed incorrect battery usage stats
- Tweaked RAM to keep as many background apps as possible
- Switched zRAM compression algorithm to Zstandard
* more RAM due to better compression ratio
- crDroid Settings: Added Parallel Space for apps
- crDroid Settings: Dropped power menu styles (unstable for now)
- Optimized graphics render engine
- Optimized overall performance
- Updated translations
 

iusmac

Senior Member
Feb 26, 2022
93
62
crDroid 9 Update
- Upgraded kernel to 4.9.336-3.6-iusmac
- Fixed incorrect WiFi MAC address detection
- Fixed kernel panic, therefore stack on Mi logo for some Riva devices
- Fixed left corner extra space when centering clocks or setting logo on status bar
- Removed HEVC support for builtin screen recorder
- Launcher3: Fixed extra bottom space when no Google search bar
- Launcher3: Added back RAM info like in MIUI to recent apps
- Added "Sound Search" tile for Google/Shazam apps
- Added current and new version on APK installation
- Optimized graphics render engine
- Optimized overall performance
- Some minor fixes and improvements
- Updated translations
 

me105

Member
Aug 25, 2021
18
1
got bootloop after few tryimg of installation ((
changed OrangeFox version and it was started 1 time and hanged
 
Last edited:

dayplatypus308

New member
Jan 7, 2023
1
0
Got backlight issue after flashing, the screen keeps lighten even after suspension
Device : Redmi 4A, ROM build date: 01 Jan.
 

Top Liked Posts

  • There are no posts matching your filters.
  • 6
    BE3pE0l.png

    Code:
    *** Disclaimer ***
    I am not responsible for any damage you made to your device.
    You have been warned.


    crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today.


    Features:
    https://github.com/crdroidandroid/crdroid_features/blob/13.0/README.mkdn

    Extra features (implemented by the maintainer):
    Code:
    * Ability to disable touchscreen buttons
    * Audio amplification
    * Bluetooth aptX codec
    * Clear Speaker
    * Improved battery saver at kernel level
    * LED indicator on offline charging (red when 0-99%, off when 100%)
    * Mi Sound Enhancer
    * Properly calibrated sensor-based Doze mode
    * Smart Charging
    * Native support for "Ok Google" hotword feature
    * Native support for Google Phone call recording
    * FMRadio (width RDS support)
    * Ability to reboot to Fastboot
    * Battery-friendly pocket mode
    
    ⚠️Stock kernel replacement will break some of the above features (ex. Ability to disable touchscreen buttons)

    Flashing Instructions:

    Pre-installation:

    First time installation (Non-standard - read):
    1. Install OrangeFox recovery from the "Pre-installation" section or any other recovery with FBE encryption support
    2. Download the latest crDroid ROM & the latest Gapps package (Optional)
    3. Boot into recovery
    4. Perform a wipe of
      1. Dalvik / ART Cache
      2. System
      3. Vendor
      4. Cache
    5. Format data is MANDATORY using OrangeFox recovery (or any other recovery with FBE encryption support)
      💡Note: if you upgrading from crDroid 8, you only need to wipe data.
    6. Flash crDroid ROM
      ⚠ The ROM is encrypted by default. This is a crDroid requirement! ⚠
      If you don't care about encryption, you can disable it within OrangeFox recovery: demonstration (you should see "Disable FBE" button instead)
      💡 Note: encrypting via ROM's settings is no longer supported in Android 13+, so you will not be able to enable encryption in any other way (except clean install or as shown in the demo above).
    7. Flash Gapps [NikGapps T ARM64-Core] (Optional)
    8. Flash Magisk Root (Optional)
    9. Reboot to the system

    Update installation (OTA): check Settings > System > Updater

    Update installation (Local Update): check Settings > System > Updater > Three dots > Local Update

    Update installation (Recovery):
    1. Download the latest crDroid ROM
    2. Reboot to recovery
    3. Flash crDroid update
      💡 Note: read recovery logs and make sure Gapps and/or Magisk have restored themselves.
    4. Wipe Dalvik / ART Cache
    5. Reboot to the system


    Sources:
    ROM: https://github.com/crdroidandroid
    Kernel: https://github.com/crdroidandroid/android_kernel_xiaomi_rova

    Download:
    ROM https://crdroid.net/rova/9
    Changelog: See here
    Known issues:
    You tell me ;)


    Visit official website @ crDroid.net
    crDroid rova Telegram
    crDroid Community Telegram
    crDroid Updates Channel
    Donate to help our team pay server costs
    1
    1
    crDroid 9 Update
    - Upgraded kernel to 4.9.331-3.1-iusmac
    - Added more DNS providers
    - Hotspot: added ability to hide SSID
    - Updated translations
    - Fixed Bluetooth calling
    - XiaomiParts:
    * Added back Dirac tile to quick settings
    * Added Dirac logo to Dirac settings
    * Added Mi logo to all XiaomiParts features
    - Removed debris and reduced ROM size
    - Fixed PowerOffAlarm
    (!) only stock Clock app can set PowerOffAlarm
    - Set full device name for MTP USB & Bluetooth
    * will show for ex. Xiaomi Redmi 4A not Redmi 4A
    - Optimized graphics render engine
    1
    thanks, can we just upgrade from v8 without losing data and apps?
    You can try, but on first strange behavior, you can't really complain about it here. I highly recommend to always clean flash when changing android version. In case of cr8 -> cr9, you don't need to format data, just wipe it.