[ROM][13.0][OnePlus 7 Pro][Official] Pixel Experience [AOSP]

Search This thread

DaveImagery

Senior Member
Jun 7, 2014
296
53
Has anyone noticed when you dial a number, you'll hear the ring for one or two seconds, and then nothing, till the person pickups up on the other end? Not sure if it's my phone or what, but it's kind of unsettling, since you don't know if its still dialing or you got disconnected. I should mention I'm on the 12+ edition. Thanks
 

iamMG

Senior Member
Jun 12, 2012
294
103
New Delhi
OnePlus 7 Pro
Anyone else facing bootloop after flashing Magisk 25.2 on A13? I've tried all the methods:
1. patching the provided recovery.img and then flashing it.
2. extracting boot.img from payload.bin, patching it and then flashing it.
3. sideloading magisk.zip with adb in recovery mode.
None is working. The phone gets really hot while trying to start. I have to flash stock recovery to get my phone working.

The ROM file name is: PixelExperience_guacamole-13.0-BETA-20220917-0906-OFFICIAL.zip
The recovery file is: PixelExperience_guacamole-13.0-BETA-20220917-0906-OFFICIAL.img

Edit:
Any ETA or news for an upcoming update from the developer on other sources than XDA?
I too would like to know. Maybe the issue is with the beta ROM?

Edit-2: Nevermind. Had to format everything and start afresh. Rooted now.

Edit-3: Found a solution to my original problem. Do this.

Edit-4: Found the source of my problem; the Magisk module supplied by the v2.3.2 of HideMyApplist app. Apparently, A13 wasn't supported. So, I updated to v3.0.5 beta. It's fixed now.
 
Last edited:

DaveImagery

Senior Member
Jun 7, 2014
296
53
Anyone else facing bootloop after flashing Magisk 25.2 on A13? I've tried all the methods:
1. patching the provided recovery.img and then flashing it.
2. extracting boot.img from payload.bin, patching it and then flashing it.
3. sideloading magisk.zip with adb in recovery mode.
None is working. The phone gets really hot while trying to start. I have to flash stock recovery to get my phone working.

The ROM file name is: PixelExperience_guacamole-13.0-BETA-20220917-0906-OFFICIAL.zip
The recovery file is: PixelExperience_guacamole-13.0-BETA-20220917-0906-OFFICIAL.img

Edit:

I too would like to know. Maybe the issue is with the bets ROM?

Are you disabling any non compatible modules in Magisk before flashing? That happened to me. Disabling wasn't even enough, had to remove the modules, before I could get past the bootloop
 

DaveImagery

Senior Member
Jun 7, 2014
296
53
Disregard, I was bit more tired than I thought. I was able to root no problem via the Magisk bootloader patch method.
 
Last edited:

DaveImagery

Senior Member
Jun 7, 2014
296
53
Yeah. How can I disable modules when magisk is not even installed 😅
Fair enough lol

My thoughts on 13 Beta. It does seem a little faster, boot up certainly is. Fingerprint unlock at boot is faster, but finger print unlock in apps is horribly misaligned. You kinda have to guess where you need to put your finger on the screen. Also as @iamMG has mentioned, the dialer issue is still present.

Overall I love it, thank you for your continued work!
 
  • Like
Reactions: amosch

nykstark98

Senior Member
Jun 8, 2020
55
7
Hello everyone. When the next update of the Pixel Experience 13 comes out, do I have to redo the same procedure as the installation of the first PE 13 rom, excluding the ripartition file, or do I have to reflash this file too? (Obviously I made the flash of the rom with adb and with pe recovery) It's the first time I'm modding this phone, so I have this doubt 😅 Thanks in advance
 

robo_guy

Member
Oct 14, 2022
8
4
Great rom. I can confirm few bugs

1. No audible ringing when calling someone, so wont know if the call will connect until the other person picks up the phone or it goes to voicemail.

2. The other person hears their own voice while on the call with me. Temporary fix is to either put my phone on speaker or turn on hearing aid from Google Dialers accessibility settings.

3. Got one auto reboot when alarm went off in the morning. Luckily alarm rang again in 10 minutes. Not sure what happened 🤔

4. Included camera isn't great. Using
UltraCVM version 8.1.101.476920218 from XDA

5. As mentioned by other user above, fingerprint is misaligned, but not a huge deal. Would be great if fixed in next update.

Otherwise, this is a fantastic rom. Hoping for a new update soon to iron out the bugs. 😸
 
  • Like
Reactions: iamMG and TDarwald

robo_guy

Member
Oct 14, 2022
8
4
Hello everyone. When the next update of the Pixel Experience 13 comes out, do I have to redo the same procedure as the installation of the first PE 13 rom, excluding the ripartition file, or do I have to reflash this file too? (Obviously I made the flash of the rom with adb and with pe recovery) It's the first time I'm modding this phone, so I have this doubt 😅 Thanks in advance
I'm curious too. Do I just download the update and then apply it from recovery?
Would it wipe any data?
 

razorgamez

Member
Nov 30, 2015
22
4
Any suggestions on how to go about troubleshooting adaptive brightness? It was working on OOS and this is the only ROM I've installed recently.

Edit: Sensor test can't detect it. So that's interesting.
 

robo_guy

Member
Oct 14, 2022
8
4
Any suggestions on how to go about troubleshooting adaptive brightness? It was working on OOS and this is the only ROM I've installed recently.

Edit: Sensor test can't detect it. So that's interesting.
If possible, try a factory reset. If that doesn't work, try flashing the rom again with all it's components. Don't install magisk. Hopefully this resolves the issue.
If that still doesn't work, try another rom or go back to OOS and then come back to this rom again. Beware that any mistake could brick the device, so be super extra cautious about it and do so at your own risk.
Make sure to backup everything before attempting anything above. If you do try and it resolves the issue, please share it here.
 

espositodnl86

Member
Aug 28, 2021
28
2
Firstly I'd like to say that this is by far the best Android experience I've ever had. Thanks!

Only thing is the proximity sensor doesn't seem to working for me. It's especially frustrating as when your phone is in your pocket, it will try and unlock as well as when you're in a call, you'll be involuntarily pressing all the buttons with your ear.

I've tried recalibrating using Proximity Sensor Reset which didn't do a whole lot however, you can enable the proximity override service which actually enables the sensor when unlocked, however, should probably be OS controlled rather than app controlled. For anyone looking into this, I have seen this same issue mentioned elsewhere in this thread a couple of times.

Happy to try anything to fix it.

Thanks in advance.
What model do you have? GM1913 perhaps?
 

parth7667

Senior Member
Oct 5, 2011
153
315
Rajkot
Hello Everyone,

New builds for android 13 are up on official website

Please note that this is still in BETA, so there will be some minor UI/ Glitches and bugs will be there.

Changelogs:
  • Updated to October security patch
  • Updated gapps
  • Fixed crash when enabling Live Captions
  • Performance and minor bug fixes
  • Fixed device model detection (which should fix issues with L1 for some people)
  • Fixed some carrier settings were crashing
* Note: Dirty flashing is fine from previous 13 builds, no need to clean flash if you're already on PE 13
 

Top Liked Posts

  • There are no posts matching your filters.
  • 6
    I experienced stutters, battery drain and heating issues too. Will try this solution as a temporary measure.

    Hopefully these issues can be fixed with a software update! @parth7667
    The Pixel launcher is the culprit as of now, just do following things:

    Clear android system intelligence data,
    Force stop pixel launcher,
    Reboot the phone.

    Make sure you have wiped data while upgrading from the previous version.

    Also you can get the latest kernel updates from here:

    To install the new kernel update

    Reboot to recovery,
    ADB sideload zipfile,
    Reboot
    5
    Hello everyone, the November update is here

    OOS12 Firmware is required. This is the first build based on OOS12. So you might find some bugs or minor issues as well. Feel free to report them with the logs.

    Installation Guide 1 (preferred method)
    1. Install OOS 11 via fastboot and keep boot loader unlocked​
    2. Update to OOS12 on both slots​
    3. Flash PE Recovery​
    4. ADB sideload the ROM​
    5. Wipe the data​
    6. Reboot​
    Installation Guide 2
    1. Make sure you’re on any PE version​
    2. Flash PE Recovery​
    3. Reboot to recovery​
    4. ADB sideload the ROM​
    5. Wipe the data​
    6. Reboot​

    This update already includes the OOS 12 firmware. But if you still want to be sure then extract the firmware from latest OOS12 and flash all the images. Flashing firmware guide can be easily obtained from online or telegram group channel

    Changelog:

    * Initial Android 13 Stable release
    * Initial Android 13 Plus Edition builds
    * Official devices applications are reopened
    * Face Unlock is back
    * Updated translations
    3
    @parth7667 thank you so much for this great ROM. I used the Pixel Experience Plus edition (A12) and it is very stable. I see that A13 is now stable in the Pixel Experience website, I'm just asking when will A13 Plus edition be available for download?
    3
    A small request to the dev,
    Please add OOS Dolby Atmos in this custom ROM, it would absolutely make this ROM a complete package.
    And thanks for providing such a smooth ROM.
    2
    Viper4android works great on pe 13.
    For me it can be even Viper4android, but it would be great to bundle it with the ROM. I do not want to root the device
  • 24

    GtwTyCR.png



    PixelExperience for OnePlus 7 Pro [guacamole]

    What is this?

    Pixel Experience is an AOSP based ROM, with Google apps included and all Pixel goodies (launcher, wallpapers, icons, fonts, boot animation)

    Our mission is to offer the maximum possible stability and security, along with essential and useful features for the proper functioning of the device

    Based on Android 13


    What's working?
    Wifi
    RIL
    Mobile data
    GPS
    Camera
    Flashlight
    Camcorder
    Bluetooth
    Fingerprint reader
    NFC
    Lights
    Sound/vibration

    Known issues
    Nothing yet
    You tell me

    DON'T FLASH GAPPS, THEY'RE ALREADY INCLUDED
    Download PixelExperience ROM

    Donate
    Liked my work? Give me a beer

    Stay tuned
    Our Telegram channel
    Device Specified Telegram Group


    10
    Hello everyone!

    New update is out!

    Changelog:

    * May security patch
    * Updated translations and gapps
    * Fixed battery widget not working properly
    * Fixed rotation button not showing in 2-button navbar mode
    * Improved statusbar brightness control (on plus version)
    * Introduced more granular settings for hotspot (on plus version)
    * Reverted QS background on white theme to old style (on plus version)
    * Other minor issues have been fixed
    * LiveDisplay related issues have been resolved
    * Pocket mode has been added under ambient display
    * Overall performance and stability of the build
    * Fixed android auto
    10
    Hello everyone!

    New update is out!

    Changelog:

    Source Changes
    • August security patch
    • Monet boot animation added
    • Open the screenshot instead of edit when touched
    • Redo circle battery style
    • Add toggle to switch between AOSP/Google battery graphs
    • Updated translations
    • Other minor issues have been fixed

    Device Specific Changes
    • Upstream kernel to 4.14.290
    • Fixed calling ring issue (Using CAF Blobs)
    • OOS Camera improvements
    • Fixed crashdump issues
    • Fixed GCam Crash issues
    • Update blobs to OOS 11.0.9.1
    • Added multiple haptic intensity control under settings > accessibility > vibration & haptics
    • Fixed Google hotword detection.
    • Always on display will now be forced to 60hz.
    • Other minor issues have been fixed
    9
    Hello Everyone,

    Here’s the Pixel Experience Android 13 for you.

    Please note that this is still in BETA, so there will be some minor UI/ Glitches and bugs will be there.

    However this is an unofficial CI Release, but after some days I will push it as an official builds on PE Website.

    Download: https://sourceforge.net/projects/rajan-pe/files/

    Changelogs:
    • Android 13
    • OOS FW 11.0.9.1
    • EROFS + F2FS filesystems with Project Quota
    • SELinux Enforcing
    Known issues:
    • Currently Smooth display is not working, so default refresh rate will be 60hz, You can force it in developer settings to 90hz
    • In APP FOD UI is glitched
    Notes:
    • Clean flash is required
    8
    New build is up!
    Download
    here
    AFH (Mirror):

    7 PRO - https://www.androidfilehost.com/?w=files&flid=332990

    * Clean flash needed, however if you fancy a bit you can try dirty flashing and see if it works for you.

    CHANGELOG:

    * Latest PE sources merged
    * Updated to 12L
    * Enabled Call recording
    * Kernel side improvements
    * Latest OOS changes synced
    * BT Improvements & Audio improvements
    * Enabled PS controller supports
    * Minor bug fixes
    * Improved system stability