[ROM][13.0][OnePlus 7T][Official] Pixel Experience [AOSP]

Search This thread

sayedibnmasud

Member
Oct 31, 2015
27
5
Dhaka
Hi, I am interested in installing this rom, however, I have a few questions. I would be grateful if you could help me with the answers.

First of all, there are a few must-have things for me.

1. It must be possible to use banking apps.
2. I need the call recording feature. Therefore, is it possible to install the OOS dialer on this rom and have an automatic call recording feature? Google dialer won't do; it informs the other party that the call is being recorded.

Here are my device details:
Model: HD1900
Current ROM: OOS 11 beta 5 (still on this old beta because I need the call recording).

Any help is highly appreciated. Thank you.
 

obiy1024

Member
Dec 11, 2021
13
5
Hello Everyone,

Here’s the Pixel Experience Android 13 for you.

Please note that this is still in BETA, so there will be some minor UI/ Glitches and bugs will be there.

However this is an unofficial CI Release, but after some days I will push it as an official builds on PE Website.

Download: https://sourceforge.net/projects/rajan-pe/files/

Changelogs:
  • Android 13
  • OOS FW 11.0.9.1
  • EROFS + F2FS filesystems with Project Quota
  • SELinux Enforcing
Known issues:
  • Currently Smooth display is not working, so default refresh rate will be 60hz, You can force it in developer settings to 90hz
  • In APP FOD UI is glitched
Notes:
  • Clean flash is required
Hi, is the website version resolved the issue? Because I saw the refresh rate is 90hz without modifying developer options.
 

mikefnz

Senior Member
Jan 30, 2008
775
220
Christchurch
OnePlus 7T
Xiaomi Mi Pad 5
Hi, I am interested in installing this rom, however, I have a few questions. I would be grateful if you could help me with the answers.

First of all, there are a few must-have things for me.

1. It must be possible to use banking apps.
2. I need the call recording feature. Therefore, is it possible to install the OOS dialer on this rom and have an automatic call recording feature? Google dialer won't do; it informs the other party that the call is being recorded.

Here are my device details:
Model: HD1900
Current ROM: OOS 11 beta 5 (still on this old beta because I need the call recording).

Any help is highly appreciated. Thank you.
My banking apps work fine, rooted with Safetynetfix, etc.
I don't need clandestine call recording, but I think there is a magisk module for that.
 

Mzmalik

Member
Sep 7, 2015
7
1
Hello Everyone,

Here’s the Pixel Experience Android 13 for you.

Please note that this is still in BETA, so there will be some minor UI/ Glitches and bugs will be there.

However this is an unofficial CI Release, but after some days I will push it as an official builds on PE Website.

Download: https://sourceforge.net/projects/rajan-pe/files/

Changelogs:
  • Android 13
  • OOS FW 11.0.9.1
  • EROFS + F2FS filesystems with Project Quota
  • SELinux Enforcing
Known issues:
  • Currently Smooth display is not working, so default refresh rate will be 60hz, You can force it in developer settings to 90hz
  • In APP FOD UI is glitched
Notes:
  • Clean flash is required
Guys who have installed this version.... Any review... Known issues?
 

sam.28011997

Member
Oct 17, 2018
8
2
Guys who have installed this version.... Any review... Known issues?
I installed it, like the ui and clean software experience. Some issues I encountered were:
1. Fingerprint sensor is not good enough to be used for any purpose. It's working for around 4 out of 10 times for a reference.
2. Sometimes gesture navigation is not responsive for home and app clearing from tasks is also having some issue.
3. Auto-brightness tends to majorly stay highest so disabling is the only option.
4. While installing, the guide on wiki is not very accurate on boot_a and boot_b description while installing recovery image. Can be confusing to read.
 
  • Like
Reactions: fleshi and Mzmalik

MatteoTito

Member
May 18, 2022
6
0
Hi everyone,

I have noticed that the pixel buds built in app doesnt work. I have tried to unistall/deactivate but still doesnt work.

Is there a way to fix It?
 

merihy

Senior Member
Aug 12, 2015
93
49
hi, I just installed this rom. after installation I locked the bootloader and devices did not boot.
It says your device is corrupt and will not work. It only worked after I unlocked again.
Is it a must to use this rom with unlocked bootloader? how can I lock again?
 

HueyT

Senior Member
Apr 3, 2014
4,734
2,148
New Albany, IN
OnePlus 7T
hi, I just installed this rom. after installation I locked the bootloader and devices did not boot.
It says your device is corrupt and will not work. It only worked after I unlocked again.
Is it a must to use this rom with unlocked bootloader? how can I lock again?
Custom roms in general need unlocked BL. Try divestos (lineage19.1 based) or oos11 if u want to lock BL
 
  • Like
Reactions: merihy

merihy

Senior Member
Aug 12, 2015
93
49
Custom roms in general need unlocked BL. Try divestos (lineage19.1 based) or oos11 if u want to lock BL
Thanks for the info. I was just worried if bank apps would not work with bootloader unlocked but they work with no problem. Will see if all apps will work just fine (one app already did not work :) )
 

HueyT

Senior Member
Apr 3, 2014
4,734
2,148
New Albany, IN
OnePlus 7T

arvindgr

Senior Member
Nov 8, 2013
946
346
Tamilan
OnePlus 7T
Redmi 9 Power
Hi, I am interested in installing this rom, however, I have a few questions. I would be grateful if you could help me with the answers.

First of all, there are a few must-have things for me.

1. It must be possible to use banking apps.
2. I need the call recording feature. Therefore, is it possible to install the OOS dialer on this rom and have an automatic call recording feature? Google dialer won't do; it informs the other party that the call is being recorded.

Here are my device details:
Model: HD1900
Current ROM: OOS 11 beta 5 (still on this old beta because I need the call recording).

Any help is highly appreciated. Thank you.
1. Just don't root it. I'm able to use all banking apps and GPay
2. Call recording on Google Phone app works all fine
 
  • Like
Reactions: GuyInDogSuit

arvindgr

Senior Member
Nov 8, 2013
946
346
Tamilan
OnePlus 7T
Redmi 9 Power
I installed it, like the ui and clean software experience. Some issues I encountered were:
1. Fingerprint sensor is not good enough to be used for any purpose. It's working for around 4 out of 10 times for a reference.
2. Sometimes gesture navigation is not responsive for home and app clearing from tasks is also having some issue.
3. Auto-brightness tends to majorly stay highest so disabling is the only option.
4. While installing, the guide on wiki is not very accurate on boot_a and boot_b description while installing recovery image. Can be confusing to read.
Well noted spot-on observation. Stability wise I see no issues so far.. Pretty fast as well except above issues. Standby Battery drain seem to be major but not much bothering. Hope Network speed metre and long press power button for Torch will be added soon once it's gains stable status
 

Bau38

New member
Sep 23, 2022
2
0
Boot to recovery
Go to advance
Select enter fastboot
If you're on slot a then do fastboot --set-active=b and vice versa
Hi @parth7667
I recently faced the same issue after updating to the august build from the July build. I factory reset the device, and even switched slots through fast boot as you recommended however i am still getting qualcolm crash dump mode when rebooting.
subsys-restart: Restting the SoC - modem crashed
device_restart_work_hdlr
Is there a link that can help me download the July build back again? the only builds on the website are the august builds and I've tried all of them and I get the same error, both 12 and 12 plus. Including the 8/19 update.
 

Top Liked Posts

  • There are no posts matching your filters.
  • 4
    Whoever is facing lag or battery drain and heat, please try below things

    The Pixel launcher is the culprit as of now, just do following things:

    Clear android system intelligence data,
    Force stop pixel launcher,
    Reboot the phone.

    Make sure you have wiped data while upgrading from the previous version.

    Also you can get the latest kernel updates from here:

    To install the new kernel update

    Reboot to recovery,
    ADB sideload zipfile,
    Reboot
    3
    Hello everyone, the November update is here

    OOS12 Firmware is required. This is the first build based on OOS12. So you might find some bugs or minor issues as well. Feel free to report them with the logs.

    Installation Guide 1 (preferred method)
    1. Install OOS 11 via fastboot and keep boot loader unlocked​
    2. Update to OOS12 on both slots​
    3. Flash PE Recovery​
    4. ADB sideload the ROM​
    5. Wipe the data​
    6. Reboot​
    Installation Guide 2
    1. Make sure you’re on any PE version​
    2. Flash PE Recovery​
    3. Reboot to recovery​
    4. ADB sideload the ROM​
    5. Wipe the data​
    6. Reboot​

    This update already includes the OOS 12 firmware. But if you still want to be sure then extract the firmware from latest OOS12 and flash all the images. Flashing firmware guide can be easily obtained from online or telegram group channel

    Changelog:

    * Initial Android 13 Stable release
    * Initial Android 13 Plus Edition builds
    * Official devices applications are reopened
    * Face Unlock is back
    * Updated translations
    2
    Google backup is safest.
    Don't rely to heavyily on Google backup! When I got my display replaced, I had to wipe my phone to send it in for repair. Afterwards, I was unable to recover from my backup. I could see it listed, but I couldn't select it for restore. So I lost lot's of messages and some other stuff. I didn't find any explanation or workaround when searching the web. You will find several posts all over the web regarding this issue.
    So I do extra backups now, eg using MyPhoneExplorer.
    2
    so we cant upgrade our 7t from pe 13 beta to pe 13 plus stable
    without wipe???

    edit: installed it and works ok
    2022-11-16_230913.jpg
    2
    in bootloader
    fastboot flash recovery PixelExperience_Plus_hotdogb-13.0-20221115-1458-OFFICIAL.img

    in recovery
    adb sideload PixelExperience_Plus_hotdogb-13.0-20221115-1458-OFFICIAL.zip

    if root
    patch boot.img with magisk and
    in bootloader
    fastboot flash boot magisk_patched-25200_5Mobp.img

    no wipe, from pe 13 beta on 7t to pe 13 plus stable
  • 12

    GtwTyCR.png



    PixelExperience for OnePlus 7T [hotdogb]

    What is this?

    Pixel Experience is an AOSP based ROM, with Google apps included and all Pixel goodies (launcher, wallpapers, icons, fonts, boot animation)

    Our mission is to offer the maximum possible stability and security, along with essential and useful features for the proper functioning of the device

    Based on Android 13


    What's working?
    Wifi
    RIL
    Mobile data
    GPS
    Camera
    Flashlight
    Camcorder
    Bluetooth
    Fingerprint reader
    NFC
    Lights
    Sound/vibration

    Known issues
    Nothing yet
    You tell me

    DON'T FLASH GAPPS, THEY'RE ALREADY INCLUDED
    Download PixelExperience ROM

    Donate
    Liked my work? Give me a beer

    Stay tuned
    Our Telegram channel
    Device Specified Telegram Group


    12
    Hello Everyone,

    Here’s the Pixel Experience Android 13 for you.

    Please note that this is still in BETA, so there will be some minor UI/ Glitches and bugs will be there.

    However this is an unofficial CI Release, but after some days I will push it as an official builds on PE Website.

    Download: https://sourceforge.net/projects/rajan-pe/files/

    Changelogs:
    • Android 13
    • OOS FW 11.0.9.1
    • EROFS + F2FS filesystems with Project Quota
    • SELinux Enforcing
    Known issues:
    • Currently Smooth display is not working, so default refresh rate will be 60hz, You can force it in developer settings to 90hz
    • In APP FOD UI is glitched
    Notes:
    • Clean flash is required
    7
    New build is up!
    Download
    here
    * Dirty flashing will work, if you encounter any issues then you might have to clean flash.
    * As filesystem have been changed, for some devices it may require to clean flash.
    * I have uploaded the new recovery as well for all of the devices.

    CHANGELOG:

    * Fixed screen flickering issue
    * Removed min/max FPS options instead now smooth display option will be there (similar to AOSP behaviour)
    * Moved audio panel to Left
    * Changed filesystem to ext4 for better performance
    * Removed Emulated storage
    * Updated OOS Blobs to 11.0.6.1
    * Minor bug fixes
    * Improved system stability
    6
    Hello Everyone,

    New builds for android 13 are up on official website

    Please note that this is still in BETA, so there will be some minor UI/ Glitches and bugs will be there.

    Changelogs:
    • Updated to October security patch
    • Updated gapps
    • Fixed crash when enabling Live Captions
    • Performance and minor bug fixes
    • Fixed device model detection (which should fix issues with L1 for some people)
    • Fixed some carrier settings were crashing
    * Note: Dirty flashing is fine from previous 13 builds, no need to clean flash if you're already on PE 13
    6
    New build is up!
    Download
    here

    PIxel Experience 12 Plus version is also available now

    CHANGELOG:


    • April security patch
    • Fixed charging animation not appearing
    • Fixed unlock sound playing repeatedly
    • Fixed audio volumes
    • Updated translations
    • Others fixes