[ROM][13.0][OnePlus 7T Pro][OFFICIAL] crDroid v9.X [20230316]

Search This thread

Mörlin

New member
Nov 22, 2022
1
0
Hey, I've moved from DerpFest(A12) now to your drCroid ROM, saw you have A13, I updated the recovery to your latest .img & .zip (both for Android 13) but I quickly noticed that the touch doesn't work in the recovery, so in the finished installed ROM. I can't put in the PIN, no touch.
So I downgraded to crDroid 8 (A12) and it works fine.
Tried it again, but had no touch :(

Do you have any advice for me?

I'm enjoying your ROM and Work so far (in A12)

I have the OnePlus 7T Pro (to be completely sure, I know it's the forum for 'hotdog')
 

Diatomix98

Senior Member
Jun 24, 2012
686
382
Johor Bahru
Hey, I've moved from DerpFest(A12) now to your drCroid ROM, saw you have A13, I updated the recovery to your latest .img & .zip (both for Android 13) but I quickly noticed that the touch doesn't work in the recovery, so in the finished installed ROM. I can't put in the PIN, no touch.
So I downgraded to crDroid 8 (A12) and it works fine.
Tried it again, but had no touch :(

Do you have any advice for me?

I'm enjoying your ROM and Work so far (in A12)

I have the OnePlus 7T Pro (to be completely sure, I know it's the forum for 'hotdog')
Read the instructions in op. You have to be on oos12 first before flashing this rom.
 

MAkram9008

Member
Jul 23, 2019
21
3
Hey, I've moved from DerpFest(A12) now to your drCroid ROM, saw you have A13, I updated the recovery to your latest .img & .zip (both for Android 13) but I quickly noticed that the touch doesn't work in the recovery, so in the finished installed ROM. I can't put in the PIN, no touch.
So I downgraded to crDroid 8 (A12) and it works fine.
Tried it again, but had no touch :(

Do you have any advice for me?

I'm enjoying your ROM and Work so far (in A12)

I have the OnePlus 7T Pro (to be completely sure, I know it's the forum for 'hotdog')
Have you done that ? ⬇️
From crDroid 8 (or other custom ROM) to crDroid 9

Warning:
People ask the question: "Is it possible to update crDroid 8 firmware to crDroid 9 while keeping the data"? Yes it is possible. But, after the update, there may be problems with some programs or the system. Therefore, I highly recommend doing a "clean" install.

Pre-installation:
  • Download latest vendor firmware, recovery image and latest crDroid 9 firmware (Download)
Installation:
1) Backup your data to PC, OTG flash drive...
2) Enter to fastboot mode (From system: Restart... -> Bootloader. Or with the device powered off, hold Volume Up + Volume Down + Power).
3) Unpack vendor firmware zip file. We go into the unpacked folder and run the Update-firmware.sh file (if you have Linux installed) or Update-firmware.bat (if you have Windows) from the Administrator account. We follow the instructions of the installer step by step and make sure that everything is done without errors. At the end of the script program, the phone will reboot into recovery mode.
After the first start of recovery, the screen will not perceive pressing the screen. To navigate through the menu, use the volume buttons and the Power button to confirm the selection.
4) (You can skip this step if you decide to save the data) Now tap Factory Reset, then Format data / factory reset and continue with the formatting process. This will remove encryption and delete all files stored in the internal storage, as well as format your cache partition (if you have one).
5) On recovery main page tap Apply update -> Apply from ADB
Now sideload <rom_filename>.zip using command:
Code:
adb sideload <rom_filename>.zip
If getting message Signature verification failed click Yes. You'll see process stuck on 47%, Don't worry you'll get Success message just wait.
6) Once you have installed everything successfully, click the back arrow in the top left of the screen, then “Reboot system now”.
 
  • Like
Reactions: Mörlin

iamraan

Member
Jan 3, 2019
34
6
OnePlus 7 Pro
OnePlus 7T Pro
Hi! even after flashing the recovery image to both the slots, I am unable to reboot to recovery and it boots to fastboot mode again.

I am on Oneplus 7T pro, coming from OOS 12.1

Can someone please help?
 

MAkram9008

Member
Jul 23, 2019
21
3
There is some sort of network lag , for example the messages in online messaging apps are sent few seconds later after I send them, the web pages are slower in loading and the network signal is weaker, does this have something to do with the Rom as I didn't face any of this with Lineage os 19?

Another problem is using the recents button to switch between the latest couple of apps it also lags a bit ..

Thanks and appreciating your effort, I am reporting the bugs so you can work on them when you have time 👍👍👍
 
Last edited:

Repear88

Senior Member
Aug 29, 2014
82
24
Google Pixel 7 Pro
Just installed the ROM from OOS12, and I am pretty sure I read everything correctly 10 times, but my touchscreen was not working at first boot. So I guess the post for installation instructions From official ROM Android 12 to crDroid 9 needs to be updated.

Good job for the ROM tho, a lot of useful settings, very fluid ... (y)(y)

I am on widevine L3, did I do something wrong ? Is there a way to get L1 ?

Thank you !

PS: I think I found a small bug: When using fingerprint sensor on screenoff + facial recognition activated, the fingerprint sensor is extremly fast and it unlocks the screen before the front camera pops up entirely. And then the camera stays up and does not goes down. If I slow down the unlocking (by mis-positioning my finger for exemple) and wait for the camera to be fully up, then even if I unlock with my finger and not my face, the camera goes back down.
For the moment the workaround was to use the setting to only pop the camera when I slide up and not everytime I unlock the screen.
 

iHaveOP7TPro

New member
Nov 27, 2022
3
0
Just installed the ROM from OOS12, and I am pretty sure I read everything correctly 10 times, but my touchscreen was not working at first boot. So I guess the post for installation instructions From official ROM Android 12 to crDroid 9 needs to be updated.
I followed the instructions for "From official ROM Android 12 to crDroid 9" and also got the touchscreen not working as well. I'm currently stuck on the blue "Hi there" screen with the yellow Start button. The power button, volume buttons, and alert sliders work but I can't power off the phone by holding down the power button. PC recognizes device as "HD1911" under Portable Devices, but can't do anything else. MSM Download Tool doesn't recognize the connection so I can't flash anything. Does anyone have any advice?
 

Repear88

Senior Member
Aug 29, 2014
82
24
Google Pixel 7 Pro
I followed the instructions for "From official ROM Android 12 to crDroid 9" and also got the touchscreen not working as well. I'm currently stuck on the blue "Hi there" screen with the yellow Start button. The power button, volume buttons, and alert sliders work but I can't power off the phone by holding down the power button. PC recognizes device as "HD1911" under Portable Devices, but can't do anything else. MSM Download Tool doesn't recognize the connection so I can't flash anything. Does anyone have any advice?
Hi, you should be able to reboot if you hold the power button long enough. That's what I did.
Then entered fastboot and flashed the firmwares.

My touchscreen was working after this.
 

iHaveOP7TPro

New member
Nov 27, 2022
3
0
It doesn't work for me for some reason, I've held the power button down long enough (over a minute) that eventually the screen dims and then turns off. Not sure what other options are available besides letting the power drain.
 

iHaveOP7TPro

New member
Nov 27, 2022
3
0
Thank you!! That actually got me on the right path to resolving this.

1. Force shut down by holding Volume Up + Power for ~10 secs.
2. Press Volume Down + Power for ~10 secs until bootloader screen shows up.

After this point, I followed steps provided from the crDroid recovery screen to Format Data / Factory Reset, Apply update, and Sideload rom_filename.zip.
 

dekadude

Member
Mar 23, 2013
33
1
I am debating with myself to get this or Xtended rom, basically I want a barebones ROM but ideally at very least has easy options for advanced reboot/power off, easily change icons on front like battery percentage rather than a image, change the icon used for signal strength.

Added with one that is usable with apps that detect custom roms.

Any feedback?
 

MAkram9008

Member
Jul 23, 2019
21
3
T
I am debating with myself to get this or Xtended rom, basically I want a barebones ROM but ideally at very least has easy options for advanced reboot/power off, easily change icons on front like battery percentage rather than a image, change the icon used for signal strength.

Added with one that is usable with apps that detect custom roms.

Any feedback?
This Rom has all these features already... Lineage OS is good too and has these features with less customizability
 

ShevT

Senior Member
Feb 1, 2011
831
1,703
Russia
OnePlus 7T
OnePlus 7T Pro
===== 20221130 =====

WARNING!!!

Before installing this update, you must manually update Recovery.
Otherwise, you will get an error at the end of the update.


* Switch to erofs
* Kernel 4.14.300
* Kernel: Many performance and battery related improvements
* Added refresh rate tile
* Added Power menu styles
* Calculator: Material you
* Settings: Add toggle for connectivity check
* Fixed issue with DeskClock not playing alarm sound if increasing sound option is used
* Updated clock widget to Monet colors
* Added option to toggle netflix devices spoofing
* Fix WifiInjector instance exception if WifiService disabled
* Fix NullPointerException when starting app with old ApplicationInfo
* Fixed black screen after DOZE
* Reworked some PixelPropUtils props
* Launcher: Update icons from lawnicons
* Launcher: Fix spacing and colors related to All Apps header
* Launcher: Disable all caps from Personal and Work tabs
* Use framework FOD dimming
* Some other fixes here and there
* Updated translations

>> Download link <<
or OTA update

================
Donate for my work
 

iamraan

Member
Jan 3, 2019
34
6
OnePlus 7 Pro
OnePlus 7T Pro
===== 20221130 =====

WARNING!!!

Before installing this update, you must manually update Recovery.
Otherwise, you will get an error at the end of the update.


* Switch to erofs
* Kernel 4.14.300
* Kernel: Many performance and battery related improvements
* Added refresh rate tile
* Added Power menu styles
* Calculator: Material you
* Settings: Add toggle for connectivity check
* Fixed issue with DeskClock not playing alarm sound if increasing sound option is used
* Updated clock widget to Monet colors
* Added option to toggle netflix devices spoofing
* Fix WifiInjector instance exception if WifiService disabled
* Fix NullPointerException when starting app with old ApplicationInfo
* Fixed black screen after DOZE
* Reworked some PixelPropUtils props
* Launcher: Update icons from lawnicons
* Launcher: Fix spacing and colors related to All Apps header
* Launcher: Disable all caps from Personal and Work tabs
* Use framework FOD dimming
* Some other fixes here and there
* Updated translations

>> Download link <<
or OTA update

================
Donate for my work

My touch stopped responding after this update. Does anybody face the same or know the fix? Please help.

I know a Factory Reset might help with this, but I cannot afford to lose the data again. Is there any other work-around without reset?
 
Last edited:

MAkram9008

Member
Jul 23, 2019
21
3
My touch stopped responding after this update. Does anybody face the same or know the fix? Please help.

I know a Factory Reset might help with this, but I cannot afford to lose the data again. Is there any other work-around without reset?
Did you update the recovery? I am no expert, but may be you can solve this problem if you restart in fastboot then update the recovery to the last recovery for the 7t pro found on the cdroid website.
Then you might install the update another time via adb in the recovery 🤔🤔🤔
 

slapman

Senior Member
Sep 20, 2011
344
53
Tampa, FL
OnePlus 7T Pro
My touch stopped responding after this update. Does anybody face the same or know the fix? Please help.

I know a Factory Reset might help with this, but I cannot afford to lose the data again. Is there any other work-around without reset
My touch stopped responding after this update. Does anybody face the same or know the fix? Please help.

I know a Factory Reset might help with this, but I cannot afford to lose the data again. Is there any other work-around without reset?
I flashed the new recovery on both slots and then flashed ROM using adb side load in the recovery and ROM is working fine, didn't have to do factory reset, oh I forgot I extracted the boot.img from the build and patched it with magisk first. Then I installed ROM via adb side load and when completed flashed magiskpatched.img through bootloader with CMD command fastboot flash boot magiskpatched.img
 

sidgabriel

Member
Oct 16, 2011
12
1
OnePlus 7T Pro
Hi guys, I'm getting some error when I'm applying the sideload:
Error applying update: 63 (ErrorCode::kPostInstallMountError)
ERROR: recovery: Error in /sideload/package.zip (status 1)


Didn't do the clean install yet, just trying the dirtflash first.
Can someone help me with this before cleaning all?
 
Last edited:

Top Liked Posts

  • 1
    Generally speaking custom roms don't have as good of a battery life as Stock OS. An OEM can make deeper optimizations than a custom rom dev
    For me criteria is drain during the night as day usage depend of the number of calls and messages.
    This night usage was 5% for 9 hr. Better than stock.
  • 8
    ===== 20230316 =====
    * Kernel 4.14.309
    * Fix blur on recent
    * iconpacks: Fix screenshot icon color
    * Update themed icons
    * Add CookieRun Font
    * Fix Smart Charging (thnks @hejsms (https://t.me/hejsms))
    * ParallelSpace: Block telecom server package
    * InputMethod: Prevent unnecessary invocation of IME
    * SystemUI: Prevent systemui crash when reinflating QS
    * SystemUI: add haptic feedback for qs tiles
    * SystemUI: Refactor notification reticker
    * SystemUI: Add restart SystemUI in Advanced Reboot
    * Removed sensitive info from SUPL requests
    * Ignore AGPS toggle during user-initiated emergency calls
    * Always make mouse cursor show on external display if it exists
    * Avoid saving length as in a sql db for quick unlock
    * CachedBluetoothDevice: Fix detecting connect fail
    * CachedBluetoothDevice: Add missing LeAudioProfile
    * Fix: Skype is not opening in full screen
    * Multiple PIP mode fixes
    * Fix secondary user crash with system user locked
    * Updated translations
    * Some other small changes

    >> Download link <<
    or OTA update

    ================
    Donate for my work
    8
    ===== 20230303 =====
    * GPS fixes
    * Messaging: Add check before casting
    * Telephony: Reevaluate condition on handover retry
    * SystemUI: Set qs bottom drawable footer color to transparent
    * SystemUI: Implement Bluetooth dialog
    * SystemUI: Hide wifi standard icon if not connected to wifi
    * SystemUI: Set alert dialog message to use system font
    * ColorContoller: Fix getting default accent color
    * Iconpacks: Fix screenshot icon color
    * Bluetooth: audiocodecs: add 16 bit sample rate for APTX offloading
    * Updated translations
    * Some other small changes

    >> Download link <<
    or OTA update

    ================
    Donate for my work
    7
    ===== 20230304 =====
    * Returned the blur
    * Use List preference for status bar logo style
    * Status bar logos - Linux
    * Fixed notification slider
    * Chromium Webview 110.0.5481.65
    * Updated translations
    * Some other small changes

    >> Download link <<
    or OTA update

    ================
    Donate for my work
    3
    ===== 20230227 =====
    * Kernel 4.14.307
    * Launcher3: Enable One all apps search feature
    * Launcher3: Enable local colors for popup menu items
    * Launcher3: Enable keyguard animation
    * Launcher3: Fixed some issues with some app icons
    * Launcher3: Fix widget add screen on dark theme
    * Launcher3: Fix crash when placing widgets
    * Launcher3: Update themed icons
    * GameSpace: Notify in-coming call number when receiving/rejecting call
    * GameSpace: Port auto answer/reject calls feature
    * GameSpace: Long click Settings icon to open Settings Dashboard
    * SystemUI: Integrate Google Lens into Screenshot UI
    * SystemUI: Make Lens work without independent package installed
    * SystemUI: Do not add lens screenshot without google package enabled
    * SystemUI: Added switch Locale Tile
    * DeskClock: Fix stopwatch notification
    * DeskClock: Don't delete expired timers
    * DeskClock: Fix upcoming alarm notification
    * AudioSystem: add missing native audio formats
    * Improved 5GHz wifi connection dropout in case of low coverage
    * Apply dark theming to split shade
    * Introduce app lock
    * Some brightness logic changes
    * Some small bluetooth changes
    * Updated art and bionic
    * Some other small changes
    * Updated translations

    >> Download link <<
    or OTA update

    ================
    Donate for my work
    1
    Hi, I've clean flashed the latest release and the latest firmware+recovery a few days ago, coming from Pixel Experience. I really like crDroid better so far.

    I do have a problem though. Each time after a boot, settings assistant throws an error, saying it keeps stopping.

    I've already tried removing its cache and storage and removing and reinstalling it from the Play Store, but to no avail.

    Anything I can do?

    I'm a bit suspicious if it isn't caused by restoring my backups (apps+data) with Swift Backup (root), right after flashing crDroid. Forgot to exclude all Google apps from restoring. Cause I was surprised that I could remove the app completely, where I expected to be able to only remove updates. The same goes for the system intelligence app, which I find weird as well. That one crashed on me too, but only once.

    Here's the error log:
    Code:
    time: 1677049641474

    I am encountering the same issue, once per reboot

    EDIT: I no longer encounter this issue, there were three things that could have solved it, not sure which of the three did.
    1. I updated to the latest version
    2. I noticed Magisk wasn't installed, so I installed it
    3. I cleared data for the app
  • 22
    BE3pE0l.png

    Code:
    *** Disclaimer
    I am not responsible for any damage you made to your device
    You have been warned


    crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today

    Features

    Installation/Update Instructions:

    Sources:

    ROM: https://github.com/crdroidandroid
    Kernel: https://github.com/crdroidandroid/android_kernel_oneplus_sm8150
    Common Device tree: https://github.com/crdroidandroid/android_device_oneplus_sm8150-common
    Device tree: https://github.com/crdroidandroid/android_device_oneplus_hotdog
    Vendor Common Device tree: https://github.com/crdroidandroid/proprietary_vendor_oneplus_sm8150-common
    Vendor Device tree: https://github.com/crdroidandroid/proprietary_vendor_oneplus_hotdog

    Download:

    crDroid ROM
    Recovery Image
    OnePlus 7T Pro firmware
    GAPPS: Already Included

    Known issues:

    Tell me

    Visit official website @ crDroid.net
    crDroid Community Telegram
    crDroid Updates Channel
    Donate to help our team pay server costs


    crDroid OnePlus 7T Pro (hotdog) Telegram group
    9
    ===== 20221107 =====
    * Added: Allow disabling clipboard overlay
    * Added: Hidden network support for hotspot
    * Added: Connected devices manager for hotspot
    * Added: More DNS providers to private DNS
    * Added: Long press to copy wifi password
    * Added: Show more APK details on App info screen
    * Launcher: some more small changes here and there as well as fixes
    * Enable split notification shade in landscape
    * Some more improvements to hotspot
    * Fixed possible SIM issues with non-dual sim variants
    * Removed notification clear all icon/bg styles (useless)
    * Added wireguard support
    * Reworked bootanimation
    * Rebased Updater
    * Updater: corrected changelog URL
    * Updated Aperture (Camera)
    * Updated libcore
    * Updated translations
    * Many Fixes and Improvements

    >> Download link <<
    or OTA update

    ================
    Donate for my work
    8
    ===== 20221114 =====
    * Updated to November security patches (android-13.0.0_r13)
    * Kernel 4.14.299
    * Added One Plus Extras
    * Added Sensor block per-package switch
    * Allow switch min/peak refresh rate
    * Added face unlock support
    * Added option to disable clipboard overlay
    * Make all corners rounded on QS footer
    * Launcher: added some app icons for themed icons
    * Optimized performance and stability
    * Added wireguard support
    * Chromium Webview 107.0.5304.105
    * Optimized art
    * Updated translations
    * Many Fixes and Improvements

    >> Download link <<
    or OTA update

    ================
    Donate for my work
    8
    ===== 20221219 =====
    * Kernel 4.14.302
    * Updated to December security patches (android-13.0.0_r16)
    * Added QPR1
    * Disable Smart Pixels on UDFPS
    * Initial support for Parallel Space
    * Added reset battery stats possibility
    * Repalced ripple animation with Fluent Design-inspired animation
    * SystemUI: Match lockscreen clock font with system
    * Removed smart pulldown settings
    * Replaced default wallpaper
    * Added different phone ringtone setting for Multi SIM device
    * Updates to lmkd
    * GameSpace: Update takeScreenshot API in ScreenUtils
    * Lots of Aperture changes and fixes
    * Slightly optimize less boring apps check for heads up
    * Restricted Networking Mode fixes
    * Some more fixes here and there (this is a complete rewrite of crDroid base)
    * Updated translations

    >> Download link <<
    or OTA update

    ================
    Donate for my work
    8
    ===== 20230126 =====
    * Settings: Fix gestures saving parameters
    * ThemePicker: Fix default permissions
    * Device: audio: Enable post process for voice_call
    * Device: dolby: Tune values from OP9Pro
    * Fix long swipe gesture
    * Updated translations
    * Some more minor fixes

    >> Download link <<
    or OTA update

    ================
    Donate for my work