2022/08/27
Changelog: https://jjpprrrr.com/evox/08271011/
Changelog: https://jjpprrrr.com/evox/08271011/
No similar problems here with the newest EvoX.Hello! The gesture from the bottom up on the screen does not work well to view running applications and switch between them. I have to turn off the screen, unlock the phone and try this gesture again. [...]
U use any custom launcher?Hello! The gesture from the bottom up on the screen does not work well to view running applications and switch between them. I have to turn off the screen, unlock the phone and try this gesture again. Not every time this happens, but this problem happens very often every day. With what can be connected? Thank you! Otherwise, excellent firmware, thank you very much!
I use same config as you - no gap under the keyboard, no gesture indicator - fullscreen + gestures. No bugs or weird behavior.I'm using the launcher from the firmware. Maybe this is due to the fact that I turned off the strip at the bottom of the screen and also turned off the indent under the keyboard
Did you forget to attach the logs?Hi,
I installed the latest EvoX: https://jjpprrrr.com/evox/08271011/
after a long time going from Android 10 to Android 12. I followed the clean flash guide after updating to latest OrangFox 11.1_1 and the ROM installed successfully.
Everything is working fine except the phone doesn't wake up easily when the charger is connected. I believe the phone wakes up but the brightness is extremely dim and the screen is unresponsive. To wake up during charging, I have to press power button followed by fingerprint sensor immediately.
The issue disappears when the charger is not connected. This happens with other charger as well.
logcat attached. Not sure if the logcat captured the event. Kindly help. Thanks.
Its not attaching probably because of size.
I'm not currently on evox so I can't really test it, but do you remember if you have tweaked any settings regarding "doze" or "ambient" or similar things? I suspect your screen waked up and got stuck to an incorrect doze brightness, which is really weird.Its not attaching probably because of size.
Can be downloaded here:
https://www.dropbox.com/s/3mm0pzcqw2cp28w/evox_waking.log?dl=0
I did turn on "Tap to wake on doze". However I change the setting back off and the issue still persists.I'm not currently on evox so I can't really test it, but do you remember if you have tweaked any settings regarding "doze" or "ambient" or similar things? I suspect your screen waked up and got stuck to an incorrect doze brightness, which is really weird.
Polaris does not have Always On Display because the device has an LCD panel, not an OLED panel. Therefore, I believe the tap to wake on doze, which is clearly designed for AOD-enabled devices (AOD usually runs under doze mode), should not be there for polaris, but evox isn't famous for its quality of source code anyway.I did turn on "Tap to wake on doze". However I change the setting back off and the issue still persists.
Is it possible to reset the doze brightness?
Okay. I will perhaps wait for the next release and do on OTA update. May be that will fix the issue. Thank you for your time.Polaris does not have Always On Display because the device has an LCD panel, not an OLED panel. Therefore, I believe the tap to wake on doze, which is clearly designed for AOD-enabled devices (AOD usually runs under doze mode), should not be there for polaris, but evox isn't famous for its quality of source code anyway.
I have no idea what was actually affected by that setting and I don't know how to fix the issue without a clean flash.
Wifi doesnt work when you make callsEvolution X is a flashable Custom ROM to bring a true Pixel feel to your Android Device at first glance, with many additional configurations at your disposal. We aim to provide frequent builds with monthly security patches from the latest aosp sources!
![]()
Evolution X the Xiaomi Mi Mix 2s[polaris]
![]()
Living, Breaking, Keep Evolving.
- Team Evolution X -
@Joeyhuab
@peaktogoo
https://evolution-x.org/
Reach us on Twitter! @EvolutionXROM
![]()
All of the customizations are packed in Settings/Evolver.
![]()
Please see the changelogs for the latest known issue(s).
First Time Install / Clean Flash
![]()
- Install the latest TWRP or OrangeFox
- In TWRP/OrangeFox, open Terminal (Advanced/Terminal in TWRP, Menu/More/Terminal in OrangeFox), and run command `mke2fs -t ext4 -b 4096 /dev/block/bootdevice/by-name/cust`, then enter "y" to confirm.
- Install ROM in recovery
- Format data (the one you type "yes" to confirm)
- Reboot
Update / Dirty Flash
- Boot into recovery
- Flash the ROM
- Reboot to system & #KeepEvolving
[*]Android version: 12.1
[*]Evolution version: 6.7
[*]Security patch level: August, 2022
Build Author: jjpprrrr
ROM Source: https://github.com/Evolution-X
Kernel Source: Etude
ROM Developer: Joeyhuab
Please wait for the next update. Google changed something on the server side and Safetynet is failing.Hi, today i faced with a new problem. I don't know if it is related to system but my mcdonald app is showing that my device is not safe and i can't log in. Every other thing like payments work fine. Do you have any idea how to solve that problem ?