Yes it will.Does it work to use recoveries backup/restore to/from USB via OTG?
Yes, the answer was two pages ago, I gess as the pixels located above the FP sensor aren't fully lit, the FP sensor is not calibrated for this configurationI tried the smart pixels feature and it was good for battery saving, but my fingerprint stopped working. Is this expected?
I was looking for a solution to this problem for two days when I found that three processor cores at once consume 2600mhz for a long time and the phone heats up. I started to figure out which app was using so many resources, and I managed to figure out that it was a pixel launcher. As soon as I kill the application, the charge stops. I was not able to find out at what moments this starts to happen, but after switching to a random microsoft launcher, the charge consumption stopped.Iam Facing a Big Battery Draining Issue..Is there any way to fix it...Plzz Help me..
it's not clear to me:Revert to previous and backup. You'll need a clean flash/format.
Last time I'll be saying this. It's not my fault nor my responsibility to keep reminding everyone to keep backups of your device. You're on a custom ROM. The disclaimer in the OP states that YOU are doing this to your device on your own free will so ANY ISSUES you may encounter are your responsibility.it's not clear to me:
1) why do I need to make a backup, because I made wipe data. What exactly is there to backup? everything is already erased.
2) With what program do you need to make a backup? I made a backup using Google Drive is that what you mean?
3) why go back to the old firmware to make a backup?
4) Where can I download the official recommended DFE, and what is it? Before the firmware, it seems that I had DFE because I saw the message "unable to encrypt, encript not supported" (I don’t remember exactly how it was written).
5) how exactly to produce a clean firmware? is there a step by step guide to transition from brick with bootloop?
I was banned in the telegram group when I came with a newly formed brick and started asking.
Is it possible to remove the ban so that I can keep my finger on the pulse before the next update leading to a brick due to lack of knowledge and experience? in Telegram account name like here.
Backup everything in your internal storage and you'll need either a clean flash or format data.Hey guys,
I have updated to the last build but after the update the phones gets in to a bootloop and enters the recovery mode. I have wiped the davlik/caches and the issue still persists.
Should wipe all the data and install the ROM ?
I have downloaded the ROM via OTA. Where is the update stored in the memory ? What's the path ?
Thanks.
Just don't update if you it hassles you too much. I'm done trying to support lazy users.Is there any chance to update to the latest build without wiping all the data
I use this phone as my daily driver so wiping the whole data is not the right choice for me
Are you gonna make a new build that doesn't require formatting like all the versions before ?
Thanks in advance![]()
Okay you give me no choice. I'm disabling smart pixels again and make another update. Sick of hearing this. It shouldn't even be available in the first place.Kind of a bug, yet not sure how it works.
Evolution "smart pixels" option breaks fingerprint. With this option enabled both setup and read fingerprint becomes almost impossible. Just a notice.
Great rom. plz attach DFE if anyone has. thx
sorry to hear that. keep priorities as you feel fit. just notifying of this bug. no offence at all. using ur rom for years. it is really really great. hope u keep evolving it =) best rom 4ever =)Okay you give me no choice. I'm disabling smart pixels again and make another update. Sick of hearing this. It shouldn't even be available in the first place.
The smart pixels fingerprint thing was clarified on page 64. That's only two pages back and happened right after the latest ROM release. I wish more people would make an effort to CTRL+F or search the thread.Kind of a bug, yet not sure how it works.
Evolution "smart pixels" option breaks fingerprint. With this option enabled both setup and read fingerprint becomes almost impossible. Just a notice.
Great rom. plz attach DFE if anyone has. thx
Can't blame ya. I know it's been suggested in the past, but maybe some knowledgeable user(s) (not you!) could create a wiki and keep it updated for (too) frequently asked questions like this one, but the cynic in me thinks people would find a way of ignoring that also.Okay you give me no choice. I'm disabling smart pixels again and make another update. Sick of hearing this. It shouldn't even be available in the first place.
Man, as much as I want to keep everything intact, some users just don't read at all. There's already a disclaimer underneath the Smart Pixels toggle. I just wish users could understand why not all features can be used alongside each other.Can't blame ya. I know it's been suggested in the past, but maybe some knowledgeable user(s) (not you!) could create a wiki and keep it updated for (too) frequently asked questions like this one, but the cynic in me thinks people would find a way of ignoring that also.
Nobody blames you. Just answer the questionsLast time I'll be saying this. It's not my fault nor my responsibility to keep reminding everyone to keep backups of your device. You're on a custom ROM. The disclaimer in the OP states that YOU are doing this to your device on your own free will so ANY ISSUES you may encounter are your responsibility.
See the problem here is you're installing custom ROMs without the full knowledge about them. That's why you're having issues.it's not clear to me:
1) why do I need to make a backup, because I made wipe data. What exactly is there to backup? everything is already erased.
2) With what program do you need to make a backup? I made a backup using Google Drive is that what you mean?
3) why go back to the old firmware to make a backup?
4) Where can I download the official recommended DFE, and what is it? Before the firmware, it seems that I had DFE because I saw the message "unable to encrypt, encript not supported" (I don’t remember exactly how it was written).
5) how exactly to produce a clean firmware? is there a step by step guide to transition from brick with bootloop?
I was banned in the telegram group when I came with a newly formed brick and started asking.
Is it possible to remove the ban so that I can keep my finger on the pulse before the next update leading to a brick due to lack of knowledge and experience? in Telegram account name like here.
Yeah ota updates are fine to use for encrypted users.Formatted, flashed latest official twrp and rom but then forgot to flash DFE and only realised after I set all my apps back up![]()
Gonna just stay encrypted and update with sideload/OTG. Also are the OTA updates fine to use?
Rom feels as smooth as ever! Thanks to devs!
Thanks a lot for your answer.See the problem here is you're installing custom ROMs without the full knowledge about them. That's why you're having issues.
1. You make backups BEFORE each updates so that you can restore it if anything goes wrong.
2. You either use TWRP/OrangeFox recovery to fully backup the whole ROM. Apps are available as well to backup only apps and nothing else.
3. Well obviously you can't make a backup if your current build doesn't even boot up.
4. It is available via Google search or searching through the previous pages of the thread.
5. There's already a guide in the first post.
Clearly there's a misalignment here regarding knowledge about custom ROMs. You're even calling it firmware when the ACTUAL firmware is different from the ROM.
Because the implementation was changed. I'll try to make it work with Feb patch.Strange, I did a dirty flash and it doesn't work, clean flash and neither, I went back to the previous version of Evo and it works perfectly
An alternative to opening ambient display would be to tap your finger on the FOD while screen is off.
We did a community test in this thread. F2FS was around 20-30% faster than EXT4. While that's nice, I don't think it's worth it to reset your phone to do it, not like you're doing that many data operations on your phone. But if you plan on clean flashing you might as well go for F2FS.Marvelous! as always thank you very much for bringing so many improvements
Is there really any major improvements or changes to using f2fs? otherwise I stick with Ext4 I was looking for information but almost all the posts and videos are from 4 or 5 years ago, so I don't know, but they say that it is more unstable
1. MIUI camera isn't even supposed to be included in the first place but was added due to demand. Any issues that come along with it, including issues with instantaneous access via lockscreen, will be ignored.I get your frustration, but a bug report is a bug report and not nitpicking. Just because you may or may not be able to replicate it, it doesn't make it nitpicking but it's a courtesy to let you know of that issue and ask the community of any workarounds, until you may find the time and priority to fix the issue.
My suggestion: have you thought of an issue tracker (e.g. issues in GitHub)? This way it's easier to keep an overview. I don't think spamming everything in one thread is a good idea, especially not personal installation issues.
/*
* Your warranty is void. Or valid, probably?
*
* I am not responsible for bricked devices, dead SD cards, Ebolation X,
* thermonuclear war, or the current economic crisis caused by you following
* these directions. YOU are choosing to make these modifications, and if
* you point your finger at me for messing up your device, I will LMAO at you.
*/