[ROM] 13/12 | Fulmics ROM 8.0 ◦ v30N ◦ Tweaks | HUB | OTA ◦ MM 6.0 ◦ All variants

[kjarak]

I never used 7.5 I went from 6.9 to 7.6
On 6.9 it would shutdown normally. It would take a long time to boot which was a known issue.
On 7.6 it just hangs with flashing led when attempting to power off or reboot.

I don't understand the last part "You are the only here who could confirm... "

@kjarak Do you remember having the reboot problem on 7.5? v6.9 and v7.5 are a bit different whereas the v7.6 update is based on the v7.5 ROM. I actually didn't change the kernel and system files in v7.6 (except mixer_paths.xml, but then again if it has a problem, it generally locks up your phone almost instantly, not during reboot). The data problem may be the same way as v6.9 vs v7.5, but you are the only here who could confirm I've never had any of the problems you mentioned with any of the 3 versions (maybe that's the upside of having the D855 variant).

---------- Post added at 10:14 PM ---------- Previous post was at 10:08 PM ----------

I can't remember about the modem on 6.9. Did I flas a modem or not; maybe that's why there is no data.
Should I try downloading 7.6 again or try flashing a modem. I found backup files of this modem LG-D85130E-Flashable.Modem.zip and this exposed version xposed-v86-sdk23-arm.zip

Should I use flash these 2 again with 7.6?

 

[Deafening Roar]

@kjarak What I mean is since you seem to be the only one having this problem with v7.6 so far, it's very hard to find out if your problem is related to your phone or Fulmics v7.5/v7.6 update - only you could find it out after trying a few different versions of Fulmics on your phone. And yes, flashing modems can sometimes fix data/Wi-Fi/Bluetooth problems, but to be honest I don't know if it would help you in this case, man.

@AnthonyJRP post in English if possible - otherwise I can't help you as I don't understand Spanish. While I can't understand what's written in your phone's screen, you possibly have two chances: First, something went seriously wrong with the installation and GMSCore.apk is not present system/priv-app/GMSCore. To find if this is your problem, you need a file explorer with root explorer such as Amaze to check your phone. If this is the case, I suggest redownloading & reflashing the ROM. The second case could be a rare but ugly bug of Android which occured to me a long time ago when using Tekcafe. I flashed the ROM and a few days later, I suddenly started getting errors that Google Play Services was not installed on my phone, although the relevant APK was DEFINITELY present in its usual location, but somehow it wasn't shown in the installed apps list when I checked Apps > Settings. From what I see now, this problem possibly isn't specific to Fulmics or Tekcafe. Unfortunately the only cure I could find to this problem when using Tekcafe was wipe + reflash the ROM. You probably now have to do the same thing. I'm sorry, but that's how it's.

 

[kjarak]

ok. so I flashed the modem and got the signal. The phone also turned off. I still need to get data going by having the config messages sent.

 

[billxkhn]

Bring UX 6.0 to Fulmics for LG G3

i request you sir to please bring the new ux to fulmics g3. or bring some great update for the rom. Almost from fulmics 6.5. There is not a change in rom. Its still the same excep the magistic root.
PLEASE BRING UX UPDATE

 

[Thanhtho96]

i request you sir to please bring the new ux to fulmics g3. Or bring some great update for the rom. Almost from fulmics 6.5. There is not a change in rom. Its still the same excep the magistic root.
Please bring ux update

please stop this sh!t

 

[Deafening Roar]

@billxkhn UX6 is based on Nougat whereas UX5 is based on Marshmallow. There is NO stock Nougat ROM for LG G3, so UX6 can't be ported back to LG G3. This was discussed here before, so please make a search in the thread before asking the same thing AGAIN AND AGAIN. As for differences between v6.5 and the latest version, surely not much has changed visually, but under the hood the latest version is certainly better than v6.5 for most people out there, so let's respect xpirt's efforts instead of constantly complaning about the "lack" of new features. If it wasn't for developers out there, we would still only have UX4 in our phones (and that, IMHO, looks way better than both UX5 and UX6, despite looking less "modern" than them, but that's another story).

 

[JG420]

Edit: I read more posts and realized I have to wipe the system too...how can I I keep all my apps and settings after a full wipe?? I'm running 7.5 can I just do a dirty flash to 7.6 so I can keep all my apps and not have to start over (again) lol

 

[Juhkimo]

Edit: I read more posts and realized I have to wipe the system too...how can I I keep all my apps and settings after a full wipe?? I'm running 7.5 can I just do a dirty flash to 7.6 so I can keep all my apps and not have to start over (again) lol

Titanium backup from google playstore

 

[acrylamid]

Having trouble to add modules in magisk, anyone else with the same problem?

 

[Aid777]

I did something silly. I had been trying a couple of 7.1 ROMS and flashed them with TWRP 3.1.1
I then decided to go back to Fulmics 7.6 because I prefer this at the moment. I tried with the same version of TWRP, but of course it could not start the Aroma installer and I got into a kind of boot loop (I forgot 3.1.1 does not work with this flash!). I pulled battery, and hardware key started in TWRP and flashed an earlier version of TWRP (3.0.2 I think it was). The re-flash worked fine and I also flashed xceed at the same time.
I do not have root though, despite Magisk v12 being 'installed' (it's in my app drawer), I can force stop or disable the app, but when I start the app root is not there and it vibrates and the message is Magisk not installed, and I can start an update of v12 which I have done. I tried to install the apk of magisk but that did nothing to help.
What should I do, should I just wipe and clean flash Fulmics 7.6 again? Should I flash v13 beta of Magisk or stick with v12
Fuunny think is I has Fulmics 7.6 installed yesterday and had root! I cannot remember if I used v12 or v13 of Magisk though. I need to take more care. Thank you
EDIT. ALL FIXED NOW

 

[acrylamid]

What should I do, should I just wipe and clean flash Fulmics 7.6 again? Should I flash v13 beta of Magisk or stick with v12
Fuunny think is I has Fulmics 7.6 installed yesterday and had root! I cannot remember if I used v12 or v13 of Magisk though. I need to take more care. Thank you

Tried with v13 and didn't work for me. I guess it is because wrong boot.img, and you should pick the boot.img from Fulmics.zip (don't know which) and flash it in twrp and then flash v13. But haven't tried it myself.

 

[Aid777]

Tried with v13 and didn't work for me. I guess it is because wrong boot.img, and you should pick the boot.img from Fulmics.zip (don't know which) and flash it in twrp and then flash v13. But haven't tried it myself.

So I downloaded and installed the v12 that was downloaded within the app and I have root now. SafetyNet failed though. I was sure it worked before....

 

[acrylamid]

So I downloaded and installed the v12 that was downloaded within the app and I have root now. SafetyNet failed though. I was sure it worked before....

Never passed safety net with Fulmics.

 

[Aid777]

Never passed safety net with Fulmics.

Hide apps still works with some apps. Works with "My EE" app. It that normal?

 

[xpirt]

Never passed safety net with Fulmics.

safetynet used to be passed after enabling magiskhide on magisk 12.
google added some changes later and broke it.
then that check has been patched and fixed in magisk v13.

if you installed fulmics after google's changes, you have to wait until stable magisk 13 comes out.

ps: if you don't want to wait, you can already install beta v13 and enable core mode only to pass safetynet.

 

[bass_rockers]

safetynet used to be passed after enabling magiskhide on magisk 12.
google added some changes later and broke it.
then that check has been patched and fixed in magisk v13.

if you installed fulmics after google's changes, you have to wait until stable magisk 13 comes out.

ps: if you don't want to wait, you can already install beta v13 and enable core mode only to pass safetynet.

I flash Fulmics 7.6 with magisk 12. Then flash Magisk Unninstaller after that flash Magisk 13. All works perfect. SafetyNet Pass and AndroidPay work (with Magisk Hide turned ON).

 

[AtrixHDMan]

I flash Fulmics 7.6 with magisk 12. Then flash Magisk Unninstaller after that flash Magisk 13. All works perfect. SafetyNet Pass and AndroidPay work (with Magisk Hide turned ON).

Do you have xposed install?

Sent from my LG-D851 using XDA-Developers Legacy app

 

[Aid777]

I flash Fulmics 7.6 with magisk 12. Then flash Magisk Unninstaller after that flash Magisk 13. All works perfect. SafetyNet Pass and AndroidPay work (with Magisk Hide turned ON).

What version of TWRP did you use? do you need 3.1.1 to flash v13 of Magisk, and did you just flash the installer in TWRP, then straight away flash v13, then just reboot? I assume you don't have to uninstall, then reboot, then got back into TWRP, then flash V13?

 

[bass_rockers]

Do you have xposed install?

Sent from my LG-D851 using XDA-Developers Legacy app

On previous 7.5 Yes but now NO

 

[rewrew]

I have one question: I had just installed v7.5 and I would not like to start again from scratch. Is there any way to update without wiping the phone and loose everything? Thanks for the great job!!

Enviado desde mi LG-D855 mediante Tapatalk