As I wrote, I do not have these problems on LineageOS 18 as on LineageOS 20. From what Scaniathe wrote, he also did not have these problems. It's weird that it works for everyone and not for you. As I said, it may be a hardware problem, not a software one.
[ROM][13][AKARI][OFFICIAL] LineageOS 20.0
- Thread starter dtrunk90
- Start date
You clearly do not understand english it seems. So if it is a hardware isue,how then do both speaker work perfectly when i flash back to a stock rom if it is a hardware issue? Just because both of you dont have the issue or more likely,do not correctly understand the issue,it does not mean that it then simply does not exist for anyone else.
K,bye now
Calm down everyone please. I couldn't check if i can reproduce it yet but I do understand what you mean.
Thank you @dtrunk90 as long as you,who is working on building these Roms for our devices,understands the problem and are willing to help by looking in to the issue and hopefully can create a fix for it,i am happy and will wait until you have the time. It is a great rom otherwise and other than my problems with the speaker balance and volumes in accessibiliy menu,i wish we could get a better camera app as part of the rom.
Thanks again and have a good day further
She reported a possible bug, i didn't checked yet if i can reproduce so pls stop this discussion. it just doesn't make sense yet.Womens
I asked you to install viper4android the best for sound on android, but it's better to shout
I mean, I had that issue since upgrading to stock Android 10, so I don't know how it can be a hardware issue
It's interesting that since LineageOS 18 no one but you reported a problem and there were a lot of people here on the forum using roms from LineageOS 18 to LineageOS 20. People reported various problems but not about bad sound balance.
yes. and as previously mentioned, I had them since upgrading to stock Android 10(locked bootloader at that time)
Strange..... Because everything works fine for me. At Scaniathe too. This is really very strange....?? To be honest, I'm stuck right now and don't know what to write.
ik a lot of XZ2 users who have this problem..so let's say ur lucky not to have it
Well, that's how lucky it is :/ik a lot of XZ2 users who have this problem..so let's say ur lucky not to have it
hey, I tried to flash this ROM but everytime I flash the recovery image, it just hangs at the Sony logo. any ideas why?
did you followed everything from the install instructions? the steps are the same for 20.0.
However, I managed to flash recovery without a pc and a second device, of course, bootloop, although the system is already working, so I went back to the tests, greetings
casouzaj
Senior Member
hi,
thak you for this message
just :
a/ will it be your image, as the official of this andro/lineage release chosen?
b/ does lineage have few devs whom have xz2 so you're running a parallel initiative? or you do everything and then they check?
c/ how long could it takes between your image released on that thread, and the LOS makes it official?
d/ answer D may come later
I'm the official maintainer but LOS 20 is not released yet and I don't know when it will be the case. The official builds are built on LOS servers, signed with their key. This is an unofficial build which was built on my local machine and signed with test keys (that's why you get a warning from trust because of the build signature). That's the only difference.hi,
thak you for this message
just :
a/ will it be your image, as the official of this andro/lineage release chosen?
b/ does lineage have few devs whom have xz2 so you're running a parallel initiative? or you do everything and then they check?
c/ how long could it takes between your image released on that thread, and the LOS makes it official?
d/ answer D may come later
Similar threads
- Poll
Top Liked Posts
-
There are no posts matching your filters.
-
3
The easiest way would be to flash the stock firmware on both slots (you can change the slots with fastboot and flash them with xperifirm).
But please use your region firmware for VoLTE.
Then flash the boot image like described here https://wiki.lineageos.org/devices/akari/install and then boot the recovery to install the LOS20 zip file.
Also you should boot the stock firmware once until you see your apps to make sure your modem has the newest update.2
From what i can tell is: We/I don't ship firmware. For example the mbn files containing the operator specific stuff are part of that. I only ship the modem configs which simply contain the path to the mbn file to use. So it's important to flash the latest regional stock rom before switching to LOS.1
From what i read you're still trying to add mbn files from other phones. Since these are binary firmware files specifically for the devices modem they won't work on other modem hardware. -
11
About LineageOSCode:#include <std_disclaimer.h> /* * Your warranty is now void. * * I am not responsible for bricked devices, dead SD cards, * thermonuclear war, or you getting fired because the alarm app failed. Please * do some research if you have any concerns about features included in this ROM * before flashing it! YOU are choosing to make these modifications, and if * you point the finger at me for messing up your device, I will laugh at you. */
LineageOS is a free, community built, aftermarket firmware distribution of Android 13.x (T),
which is designed to increase performance and reliability over stock Android for your device.
All the source code for LineageOS is available in the LineageOS GitHub repo.
And if you would like to contribute to LineageOS, please visit our Gerrit Code Review.
Official LineageOS website : https://lineageos.org/
About LineageOS Legal : https://lineageos.org/legal/
Important Information
1. This ROM will never work with any versions of Google Camera (GCam)!
2. You need to flash Stock Android 10 before flashing this ROM.
Downloads Links
LineageOS 20.0:
Official builds: Link
Google Applications (optional):
MindTheGapps: https://wiki.lineageos.org/gapps
Information: Flash the GApps before the first boot. If not, a clean flash is recommended.
Flashing and updating
Please refer to the official installation guide at https://wiki.lineageos.org/devices/akari
Pass SafetyNet
Some apps like banking/payment apps or games require to pass SafetyNet.
There are 2 options:
Option 1: Without Root
1. Download the latest release of ih8sn here.
2. Replace the content of system/etc/ih8sn.conf inside the zip file with:
3. Install the zip file through recovery.Code:BUILD_FINGERPRINT=Sony/H8266/H8266:8.0.0/51.1.A.3.159/620448843:user/release-keys
Option 2: With Root
1. Install latest Magisk APK through recovery.
2. Install Universal SafetyNet Fix as Magisk module.
3. Install MagiskHide Props Config as Magisk module.
4. Run the following command either in ADB shell or a Terminal emulator app like Termux after running su to set a certified fingerprint:
5. Enable Zygisk and deny list and add some Apps to the deny list to hide rooting status.Code:props
Issues and reports
Report issues only if you are using the ROM kernel
If an additional mod is installed, make sure it's unrelated, and mention it
Make sure the issue wasn't discussed earlier in the threads
Share a log of the error with Logcat for example
Also thanks to:
Olivier
Sjll
The LineageOS Team
The CyanogenMod Team
Everyone involved in working and testing
XDAevDB Information
Lineage 20.0 for Xperia XZ2, ROM for the Xperia XZ2
Contributors
dtrunk90
Source Code: https://github.com/LineageOS
Donation
https://paypal.me/dtrunk90
ROM OS Version: Android 13
ROM Kernel: Linux 4.9
ROM Firmware Required: Official Android 10.0 firmware
Based On: LineageOS
Version Information
Status: Stable
Created 2022-10-23
Last Updated 2022-12-195
We're going official once lineage 20 is ready. Then weekly builds are automated.3
The easiest way would be to flash the stock firmware on both slots (you can change the slots with fastboot and flash them with xperifirm).
But please use your region firmware for VoLTE.
Then flash the boot image like described here https://wiki.lineageos.org/devices/akari/install and then boot the recovery to install the LOS20 zip file.
Also you should boot the stock firmware once until you see your apps to make sure your modem has the newest update.
