[ROM][13][AOSP] ArrowOS v13.1 OFFICIAL [RN8/8T][UNIFIED][OTA]
- Thread starter ghostrider_reborn
- Start date
ROM: Arrow-v13.1-ginkgo-OFFICIAL-20230529-GAPPS
Firmware: fw_ginkgo_miui_GINKGOGlobal_V12.5.2.0.RCOMIXM_75abe1782e_11.0
Recovery: [email protected]
Device: ginkgo
OEM: Unlocked
Xiaomi Unlock: Unlocked
Developer settings: enabled
USB debugging disabled
---
I need help. I'm currently experiencing bootloops. I made the installation following these steps, I'm not sure what I'm doing wrong. I tried disabling encryption, to see if it was the problem, but it didn't disable it. Besides, I could still access the flash files, through a micro sd card:
1. Boot into recovery
2. Wipe data, dalvik, cache
3. Format data
4. Flash [email protected]
5. Reboot into recovery
6. Settings>OTA & ROM>Patch ROM>Enable "Disable DM-Verity" and "Disable Forced Encryption".
7. Flash android 11 firmware
8. Flash ROM
9. Format data
10. Reboot
11. Quickly skip everything
12. Enable developer settings
13. Reboot into recovery
14. Flash Magisk-v26.1.zip
15. Reboot
16. Install Magisk-v26.1.apk
17. Received this message in Magisk app "Your device needs reflash Magisk to work properly. Please reinstall Magisk within app, recovery mode cannot get correct device info"
18. I was asked to install update.
19. Installed update through the app.
20. Reboot
21. Bootloop
Firmware: fw_ginkgo_miui_GINKGOGlobal_V12.5.2.0.RCOMIXM_75abe1782e_11.0
Recovery: [email protected]
Device: ginkgo
OEM: Unlocked
Xiaomi Unlock: Unlocked
Developer settings: enabled
USB debugging disabled
---
I need help. I'm currently experiencing bootloops. I made the installation following these steps, I'm not sure what I'm doing wrong. I tried disabling encryption, to see if it was the problem, but it didn't disable it. Besides, I could still access the flash files, through a micro sd card:
1. Boot into recovery
2. Wipe data, dalvik, cache
3. Format data
4. Flash [email protected]
5. Reboot into recovery
6. Settings>OTA & ROM>Patch ROM>Enable "Disable DM-Verity" and "Disable Forced Encryption".
7. Flash android 11 firmware
8. Flash ROM
9. Format data
10. Reboot
11. Quickly skip everything
12. Enable developer settings
13. Reboot into recovery
14. Flash Magisk-v26.1.zip
15. Reboot
16. Install Magisk-v26.1.apk
17. Received this message in Magisk app "Your device needs reflash Magisk to work properly. Please reinstall Magisk within app, recovery mode cannot get correct device info"
18. I was asked to install update.
19. Installed update through the app.
20. Reboot
21. Bootloop
Magisk zip flashing should work. If it didn't worked for you using ofox then you might try twrp official. It supports arrowos 13.1 with encryption too.
There are some gcams that show image stabilization options. Not sure whether they work or not as i haven't used them myself, but it might be worth trying.
Arrow 13.1 with ginkgo here. I love this rom. So much better than the original mui. The only issue i have is i can not save photos on sd card. As soon as i enable the option and go to camera and i return back the option is off again.
anything to do with the priveleges?
anything to do with the priveleges?
>13.1/ginko here, camera from lockscreen does not start - I get prompted for code/fingerprint and land into launcher
anyone having the same?
anyone having the same?
Thanks for your answer. I've tried 2 gcams for now but it seems that image stabilization did not work for for that.
So if anybody else tried any gcam and image stabilization works, much appreciated if you could inform it here. Thanks again.
You are an absolute chad for carrying the torch for so long! I can postpone buying a new phone for another year thanks to you. Thank you.
Hi! It seems this issue is in every rom for you. You might try a rom without this feature.
Hi
Been using the ROM for a while now, everything good but keeps getting a pesty notification from android system. Power off alarm set. tried everything, but if I disable notifications for the alarm the alarms does not work. Anybody have an idea to get rid of it?
Been using the ROM for a while now, everything good but keeps getting a pesty notification from android system. Power off alarm set. tried everything, but if I disable notifications for the alarm the alarms does not work. Anybody have an idea to get rid of it?
You can long press on the "power-off alarm set" notification, click on Turn off notifications, disable Power-off alarm
Similar threads
Top Liked Posts
-
1
If they don't understand, don't make any changes and continue using the default.
That's what I do. -
2EDL mode recovery
Phone status: Unable to enter BootLoader or fastboot mode, it automatically shuts down 1 second after booting.
Tools: Ultimate Multi Tool – QcFire (UMT-QcFire requires hardware dongle.), miflash pro (requires authorized personnel account login)
Preparation: Install the Qualocomm driver. I used miflash pro for one-click installation.
1. Enter the edl mode of the phone and connect it to the computer (the port in the device manager shows Qualcomm HS-USB QDLoader 9008).
2. Open UMT-QcFire or miflash pro for recovery. (I am using UMT-QcFire. But both tools require authorization, and some older devices may not require authorization).
3. UMT-QcFire select the flash option, select Multi Program Mode, select the images of the firmware package in Firmware, and click flash to recovery.
Precautions & error:
1.
(turn off phone, hold vol up+ vol down and insert usb cable. some phones may need special boot cable or testpointfor edlmode)
This is a communication error on port 9008. Please re-enter edl mode. I turned off the phone and connected it to the computer, then shorted the edl point again and re-entered.
2.
Forbidden Application [03] Detected!
UMT-QcFire's self-protection function prevents packet capture and cracking. If relevant packet capture software is detected, this error message will be reported.（Wireshark/Charles/Fiddler/winpcap）
Here I did not install the packet capture tool and this error occurred (maybe it was caused by my previous installation but not clean uninstallation.)
The solution is to install winpcap and then uninstall it. (Generally there will be problems during the installation of winpcap, please solve it and complete the installation)
If that still doesn't work, try a clean computer or virtual machine.
About authorization:
Authorization is probably the most troublesome point in the EDL mode recovery system. I chose a relatively cheap merchant in Taobao to purchase this authorization before I could continue.
You can consider asking xiaomi after-sales service to inquire whether you are willing to provide an authorized account, or look for an authorized merchant to purchase.11
The solution to that is to not use the ****ty native camera. Use gcam.1
sure. However, there is one thing about DEL mode recovery that requires an authorized account or hardware dongle. I chose to spend about $1 to purchase a license before I could continue.1 -
45
ArrowOS 13.1
Redmi Note 8 (ginkgo) / 8T (willow)
Code:/* * We are not responsible for bricked devices, dead SD cards, * thermonuclear war, or you getting fired because the alarm app failed. Please * do some research if you have any concerns about features included in this ROM * before flashing it! YOU are choosing to make these modifications, and if * you point the finger at us for messing up your device, We will laugh at you. * It is your fault because you chose to do all the modifications on your device. * Remember projects like these and the work done on them is a hobby to the * contributors and the team members, no one is working for you nor is getting paid for it. * Have some respect for the work done by them since it is done purely on interest or a hobby. */
ABOUT
ArrowOS is an Android Open Source Project-based Android mobile operating system started with the aim of keeping things simple, clean, neat, and organized, both for the Android system and users. We added features that will be helpful in the long run, while aiming to deliver smooth performance and longer battery life. We understand the pain of unnecessary and sometimes rarely used mods/features being shipped with custom ROMs nowadays which may end up causing battery drains and/or memory leaks & crashes. This is being strictly avoided on our side keeping everything to a bare minimum, delivering stable performance all the time without destroying the AOSP interface. With users getting more used to tweaks and features, we added just the right features and customisations that will be actually USEFUL at the end of the day.
Website: https://arrowos.net
Telegram: Channel | TG Portal/Links
Github: https://github.com/ArrowOS
Code Review: review.arrowos.net
E-mail: arrowos.contact
PayPal: Donate to us
Blog: blog.arrowos.net
More documentation at (maintainership/contributing): Check this out
WHAT WORKS?
- Almost everything (boots, RIL, calls/sms, mobile data, volte/vowifi, wifi, bluetooth, gps, audio, camera, fingerprint, DT2W, wifi display, NFC on willow, etc)
WHAT DOESN'T WORK?
- You tell me
* MiuiCamera and XiaomiParts included
* QuicksilveR kernel v2.5 (latest) included
* Latest Android 11 firmware required
* Encryption is enabled by default
* SELinux is enforcing and SafetyNet passes
* Ginkgo builds are unified for both ginkgo and willow.
DOWNLOADS
Click here to Download
Tip: Choose Arrow version -> Official, choose build type "GAPPS" or "VANILLA" to download.
INSTRUCTIONS
Clean flash (coming from a different ROM or arrow-11.0/12.0):
- Download ROM from below
- Reboot to recovery
- Wipe data, cache, dalvik cache
- Flash latest android-11 firmware (Ginkgo | Willow)
- Flash ROM zip
- Format data (if encrypted)
- Reboot and voila!
- To get root access, reboot to recovery after ROM setup and flash Magisk.
Use the built-in OTA updater, or
- Reboot to recovery
- Wipe cache and dalvik cache
- Flash ROM zip
- Flash firmware update if required
- Reboot and voila!
* HOW-TO report a bug
* GAPPS and VANILLA variants
* Checking build integrity
ROM Source: https://github.com/ArrowOS
Device Sources: https://github.com/ArrowOS-Devices
XDA: DevDB Information
ArrowOS, ROM for the Redmi Note 8
Contributors
Adithya R
Source Code: https://github.com/ArrowOS-Devices/android_kernel_xiaomi_ginkgo
ROM OS Version: Android 13
ROM Kernel: Linux 4.14
Based On: AOSP
Version Information
Status: Stable
Firmware Required: Android 1113If anyone is interested, i have builded ArrowOS 11 (Gapps and Vanilla) for those dont like to move to ArrowOS 12.x for whatever reason, with latest source they've merged into arrow-11.0 branch like Feb 2022 security patch and other fixes you can found here , plus i have updated your MIUI vendor blobs to V12.5.2.0.RCOMIXM with a upstreamed QS 2.5 kernel to 4.14.275.
Downloads for : Xiaomi Redmi Note 8 | AndroidFileHost.com | Download GApps, Roms, Kernels, Themes, Firmware and more. Free file hosting for all Android developers.
Download GApps, Roms, Kernels, Themes...www.androidfilehost.com
10ArrowOS 12.0 official builds are out!
Based on Android 12 (AOSP 12.0.0_r13)
Download from here
Select version Arrow-12.0 -> Official -> Gapps/Vanilla.
Upgrading from ArrowOS 11
- Boot into recovery
- Wipe system, vendor, cache, dalvik, data
- Flash latest android 11 firmware (Ginkgo | Willow)
- Flash ROM zip
- Format data (if encrypted)
- To disable auto encryption, flash DFE (optional)
- To get root access, flash Magisk (optional)
- Reboot and voila!
What's working?
Almost everything (Boots, RIL, calls/sms, mobile data, volte/vowifi, wifi, bluetooth, gps, audio, camera, fingerprint, DT2W, wifi display, NFC on willow, etc)
- MiuiCamera and XiaomiParts included
- SELinux is enforcing and SafetyNet passes
Known issues?
- 48MP mode in MiuiCamera (won't work in android 12)
- Fast charging on chinese Redmi Note 8 variants
- Sometimes device will freeze & reboot while trying to shutdown, will be fixed soon.
- You tell me! Report bugs with logcat
Stop begging for Pixel-specific features, this is purely an AOSP ROM.
Danny Lin (kdrag0n)'s custom monet theming engine is included.
ROM will be updated on a weekly basis or when a critical bug fix is available.
Enjoy Android 12!9ArrowOS 12.1 official builds are now available.
Download: Here
(select version Arrow-12.1 -> Official)
Changelog
- Initial Android 12L release
- May 2022 security patch
- Updated MIUI blobs from V12.5.2.0.RCOMIXM
- Upgraded telephony stack from QSSI 12
- Upgraded adreno drivers from sm8450
- Merged latest CAF tag in kernel
- Misc optimizations and fixes.
Clean flash (format data) is mandatory for those who are upgrading from ArrowOS 12.0 and has their internal storage encrypted. Future updates can be installed directly via OTA updater.
Cheers and enjoy A12L!9UPDATE!
Arrow-v11.0-ginkgo-OFFICIAL-20210307
https://arrowos.net/download/ginkgo
Changelog
- Updated stock blobs from MIUI 21.3.3
- Updated CAF blobs from LA.UM.9.11.r1-02800-NICOBAR.0
- Updated redfin fp to march (fixed safetynet)
- Fixed camera freeze in some social media apps
- Fixed camera lens switching delay
- Fixed voip/mic issues in some apps
- KCAL improvements in xiaomi parts
- Added vibration strength control in xiaomi parts
- Made notch cutout wider/smoother
- Switched to new QTI thermal HAL
- Attempted to fix screen blackouts under sunlight/heat
- Disabled KPTI for performance improvement
- Reduced readahead to 128kB to improve storage performance
- GPS config optimizations and fixes
- Tuned cpusets for better performance
- Improved rounded corners and fixed hide cutout option
- Switched to android userspace LMKD
- Added support for willow hwversion 18.31.0
- Improved zram read/write performance
- Switched to QuicksilveR v2.5 kernel
- Merged LA.UM.9.1.r1-09100-SMxxx0.0 CAF and v4.14.223 in kernel
- Fast charging on chinese ginkgo variants maybe fixed
- Misc optimizations and fixes
Cheers and happy flashing!
New posts
-
Question How to flash stock firmware while bootloader oem locked- Latest: HemanthJabalpuri
-
