[ROM][13][BERYLLIUM] crDroid v9.2 [12.03.2023]

Search This thread

dyfk3l

Senior Member
May 27, 2013
276
123
Bavaria (near Germany)
Anyone else noticed an issue with fingerprint?
Many times doesn't work and I have to press it twice. Especially if you turn screen off and press it fast.
The only issue I have is that fingerprint doesn't work immediately after screen turns off itself after display timeout.

When fingerprint doesn't work correctly after you turn it off yorself, delete them and add them again, this can help.
 
  • Like
Reactions: Retrial

Retrial

Recognized Contributor & Translator
Jun 10, 2015
2,642
6,931
Athens
Samsung Galaxy S4
Xiaomi Poco F1
The only issue I have is that fingerprint doesn't work immediately after screen turns off itself after display timeout.
Yes, the same thing happening if you manually turn the screen off and press it fast.
When fingerprint doesn't work correctly after you turn it off yorself, delete them and add them again, this can help.
The fingerprint works but need to press it twice if you try to do it immediately.

@gwolfu take a look when you time.
 
Nov 2, 2022
6
0
Xiaomi Poco F1
The fingerprint issue is the same here.

I have one other issue.
Sometimes when I start phone calls there is no dial tone.
There is no sound until the one who is called accept the call.

Is there a Android Auto integration? In the first version it didn't work. If not how can I make it work ?

Thanks
 
Last edited:
The fingerprint issue is the same here.

I have one other issue.
Sometimes when I start phone calls there is no dial tone.
There is no sound until the one who is called accept the call.

Is there a Android Auto integration? In the first version it didn't work. If not how can I make it work ?

Thanks
install full gapps
 
Last edited:

ok689

Member
Nov 25, 2019
45
11
i recently updated and the landscape notif panel broke for 2 panels and for 3 it works but its crammed
 

Attachments

  • 2 panel before update.png
    2 panel before update.png
    172.8 KB · Views: 77
  • 2 panel after update.png
    2 panel after update.png
    120.3 KB · Views: 75
  • 3 panel after update.png
    3 panel after update.png
    142.2 KB · Views: 78

ok689

Member
Nov 25, 2019
45
11
I just updated to the 4th dec update and it seems it still seemed to happen

Thanks for the the update besides this i dont seem to notice any problems

Screenshot_20221204-205804_Chrome.png
 
Feb 7, 2018
35
12
Moto G6
After I installed the latest version, google started to crash, I reflashed the Gapps again, but even so it's showing as offline with me connected to the network...
 

Attachments

  • Screenshot_20221204-134919_Google Play Store.png
    Screenshot_20221204-134919_Google Play Store.png
    90.6 KB · Views: 34
Feb 7, 2018
35
12
Moto G6
F for sourceforge, This happened to my brother-in-law's cell phone when I installed a custom rom on his cell phone, I think the problem is in Source Forge

1670200259809.png
1670200150220.png
 

seuf

Member
May 20, 2011
21
2
Lyon
Since last version (2022-12-04), my phone reboot when i try to wake it up with fingerprint. It's not a hard reboot because it did'nt ask me for pin code, but I can see the crDroid boot animation.
 

Top Liked Posts

  • There are no posts matching your filters.
  • 11
    7
    Build 20230303 is ready

    Changelog: https://crdroid.net/beryllium/9#changelog
    Download: https://crdroid.net/beryllium/9

    Join the chat on Telegram @ https://t.me/crDroidPoco
    6
    Did we switch to a bi-weekly or monthly release schedule?
    no
    this month update takes a bit more time due to QPR2 merge
    3
    Ps: I just flashed yesterday's update and it still happening
    it happened since the first 9.2
    I'll let alisensei confirm their source, but I have been facing this since the last four ROM releases at least. I did uninstall ASI, but was unable to find the app on the Play Store, so installed from apkmirror (from another user's suggestion).

    I think the ROM might be installing it. Maybe @gwolfu can confirm since other users have reported this as well. Why should Settings Services crash though? I have seen this as well since the last four ROM versions. I'm not the only one facing this.
    I searched about android system intelligence on telegram crdroid group and I found some ppl also got it with core nikgapps. Also it was shipping with the ROM in the past but gwolfu seems he removed it because causing issues. Don't know why this happening with the recent updates. I personally don't include asi in my gapps and I don't have it installed.

    @timbuctoo you could also find asi from your play store library -non installed apps- but don't install it, seems it causing issues and doesn't work properly.
    2
    Additional Question:
    Is it necessary to use the latest Recovery Image (like recovery-20230226.img) to flash the new 9.2 Versions?
    I don't exactly know what Version I use right now, but it's an old one from way back of crDroid 8.x Version.
    And if so, I guess I then also need to install the new crDroid completely new now - with also a new Gapps - and do I need also Magisk root?!
    It's been a wile and I don't think I used Magisk before on my Phone.
    Sorry again... but I'm a Noob in these thinks and with 57 not that firm in all of this ;)
    You need to update ur crdroid recovery for sure.
    Btw, you can flash/boot to twrp by reignz v2, wipe system_ext, system, dalvik art cache, cache and flash ROM+Gapps. Should be able to pass the bootloop.

    You can transfer ROM+GApps to your phone while you are in twrp if you don't have them already downloaded.

    And also make sure you are not decrypted if you was decrypted and u did update without flashing dfe again you need to format data and clean install the rom.
  • 31
    BE3pE0l.png


    Code:
    *** Disclaimer
    I am not responsible for any damage you made to your device
    You have been warned


    crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today

    Features:
    https://github.com/crdroidandroid/crdroid_features/blob/13.0/README.mkdn

    Flashing Instructions:
    Pre-installation:
    • Recovery (from download page, recovery button)
    • NikGapps core (Download from here - note that you may also need setup wizard addon if you rely on Google restore)
    • Magisk root (after first boot)

    First time installation:
    • Backup your data to PC, OTG flash drive
    • Boot to fastboot and flash recovery
    • Code:
      fastboot flash recovery recovery.img
    • Now boot to recovery by holding VOL UP + POWER
    • Navigate to Factory reset and format data, wipe cache and wipe system
    • Now reboot to recovery
    • Navigate to Apply update and choose from adb (if you have crDroid.zip on external sdcard, you may choose this option and navigate to where the zip is)
    • Now sideload crDroid zip
    • Code:
      adb sideload crDroid.zip
    • If you are running with gapps, choose again to apply from adb and sideload gapps.zip
    • Reboot to system

    Update installation:
    Via recovery
    • Boot to recovery
    • Navigate to Apply update and choose from adb (if you have crDroid.zip on external sdcard, you may choose this option and navigate to where the zip is)
    • Now sideload crDroid zip
    • Code:
      adb sideload crDroid.zip
    Via OTA:
    • Go to Settings -> System -> Updater and download latest build
    • Choose install and let it finish
    • Reboot

    Sources:
    ROM: https://github.com/crdroidandroid
    Kernel source: https://github.com/crdroidandroid/android_kernel_xiaomi_sdm845

    Download:
    ROM https://crdroid.net/beryllium/9

    Visit official website @ crDroid.net
    crDroid Poco Telegram
    crDroid Community Telegram

    If you like my work, consider a donation > My Paypal
    15
    13
    This is it, firstly thanks for taking our f1 device to a higher level, secondly @gwolfu @Retrial how to update from crdroid A12 latest build, but using official twrp, I have no problem with decrypting data or anything like that, as long as official twrp stays where it should be and don't lose data, thank you very much crdroid team and especially for you @gwolfu thanks again to everyone here
    I don't know how your official twrp is able to decrypt, encrypted ROMs since it's not working. Are u sure encrypted?
    Recommended is to do Clean Install from one Android version to another. However you can try my Dirty Installation guide below.
    Official way of installation via crDroid recovery can be found in OP.


    Installation Guide: 👨‍🏫

    Clean Install via TWRP:
    • Backup your data.
    • Downland TWRP by REIGNZ v2 (A12_System_Ext version - Current Bugs & Workarounds), crDroid ROM, A13 GApps of your choice and optional crDroid recovery if you want to use that later.
    • Boot, flash and reboot to TWRP.
    • Select Wipe > Advanced Wipe -> Select Dalvik / ART Cache, System, System_EXT, Data, Internal Storage, Vendor, Cache and then Swipe to Wipe.
    • Reboot to recovery once again (need due to a current issue with twrp by reignz) and then Format data > type yes.
    • Transfer the ROM while you are connected and into TWRP from PC to Device. (TWRP by REIGNZ3 have issue, if PC doesn't recognize the device, press in twrp menu, advanced > file manager > and find and select sdcard folder aka Internal Storage > go back and now pc should be able to recognize the device)
      If you have SDcard or USB OTG you can also use that.
    • Flash ROM, GApps. NOTE: ROM IS FORCE ENCRYPTED
    • [Optional] Flash crDroid recovery.
    • [Optional] If you want to stay decrypted, use TWRP by REIGNZ but based on A9. Mount Vendor and flash DFE A13. Do not use OTA if you are decrypted, update via dirty installation.
    • Reboot and Enjoy!
    OTA Upgrade/Update:
    ⚠️Warning⚠️

    • Only use OTA if you are encrypted. Simply go to updater and press install.

    Dirty Installation via TWRP:
    Manually Upgrade/Update the ROM

    Notes:
    • If you want to be encrypted, recommended is to do one Clean Install according to guide and afterwards you can do OTA updates.
    • If you are decrypted and you want to stay decrypted, do Dirty Install according to guide and do not use OTA.
    • If you encounter Fastboot issues read the guide/fix in my thread.
    • You can translate the ROM in Crowdin.
    13
    12
    Build 20230108 is ready

    Changelog: https://crdroid.net/beryllium/9#changelog
    Download: https://crdroid.net/beryllium/9

    Join the chat on Telegram @ https://t.me/crDroidPoco