[ROM][13][BERYLLIUM] crDroid v9.5 [26.05.2023]
- Thread starter gwolfu
- Start date
Build 20221106 is ready
Changelog: https://crdroid.net/beryllium/9#changelog
Download: https://crdroid.net/beryllium/9
Changelog: https://crdroid.net/beryllium/9#changelog
Download: https://crdroid.net/beryllium/9
Last edited by a moderator:
there's no need for TWRP
in fact I don't recommend it
crDroid recovery is good enough for a "recovery needs"
hi, i just share what i experienced that:
1. dirty flash from crdroid v8.9 or 8.10 via TWRP v3.7.0 is not recommended, unless you want to be in a bootloop state
2. clean install via TWRP works, but it seems it's still recommended to use crdroid recovery to receive ota updates, and I noticed on crdroid12 that updating using TWRP causes a few glitches on the homescreen such as flashing wallpaper, stuttering scrolling, etc.. I finally switched to crdroid recovery to get updates that run optimally and stable
3. In this crdroid13, it looks like there are still many bugs, such as UI and statusbar that still need improvement, then the background blur in the menu suddenly disappears after opening the app from the menu, partially cropped icons under the menu search bar, faceunlock is not available, etc. . but overall, this rom is amazing like it has characteristics compared to other roms, considering this crdroid13 it's still in beta stage I'm sure in the future with improvements, this will be the best rom for poco f1 because customization in this rom is so easy.
in the end I decided to stay on crdroid12 v8.10 and wait until it runs stably. Thank you
1. dirty flash from crdroid v8.9 or 8.10 via TWRP v3.7.0 is not recommended, unless you want to be in a bootloop state
2. clean install via TWRP works, but it seems it's still recommended to use crdroid recovery to receive ota updates, and I noticed on crdroid12 that updating using TWRP causes a few glitches on the homescreen such as flashing wallpaper, stuttering scrolling, etc.. I finally switched to crdroid recovery to get updates that run optimally and stable
3. In this crdroid13, it looks like there are still many bugs, such as UI and statusbar that still need improvement, then the background blur in the menu suddenly disappears after opening the app from the menu, partially cropped icons under the menu search bar, faceunlock is not available, etc. . but overall, this rom is amazing like it has characteristics compared to other roms, considering this crdroid13 it's still in beta stage I'm sure in the future with improvements, this will be the best rom for poco f1 because customization in this rom is so easy.
in the end I decided to stay on crdroid12 v8.10 and wait until it runs stably. Thank you
So OTA from TWRP counts as a dirty flash?
And will it be fine if i switch back and forth on crdroid recovery for OTA and TWRP when i need to flash something
I think so
Isn't crdroid recovery also possible if it's just to flash something, although its stability is somewhat doubtful,
I also regret why official twrp doesn't support encrypted rom yet, while unofficial twrp by reignz which has support also has bugs.
but if you want to bother with changing recovery many times, I think it's fine
Build 20221111 is ready
Changelog: https://crdroid.net/beryllium/9#changelog
Download: https://crdroid.net/beryllium/9
Changelog: https://crdroid.net/beryllium/9#changelog
Download: https://crdroid.net/beryllium/9
Last edited by a moderator:
Hello, this looks like a great rom and I'll be trying it out in a few days. I am curious if xiaomi's dial codes or hidden menus work with this rom? It's not a big deal to me anymore but I was trying to access *#0808# which is the USB settings but I couldn't get in. I'm not even sure if any custom rom offer this.
It should be doable . Just a few days ago the dev confirmed that it's finally possible in cr 9 in response to comments regarding to getting it to work in cr 8(not possible but there's a workaround available which involves Tasker and Wireless ADB trick) .
Similar threads
- Locked
Top Liked Posts
-
There are no posts matching your filters.
-
9Build 20230505 is ready
Changelog: https://crdroid.net/beryllium/9#changelog
Download: https://crdroid.net/beryllium/96Build 20230519 is ready
Changelog: https://crdroid.net/beryllium/9#changelog
Download: https://crdroid.net/beryllium/96Build 20230513 is ready
Changelog: https://crdroid.net/beryllium/9#changelog
Download: https://crdroid.net/beryllium/95Build 20230526 is ready
Changelog: https://crdroid.net/beryllium/9#changelog
Download: https://crdroid.net/beryllium/9 -
34
Code:*** Disclaimer I am not responsible for any damage you made to your device You have been warned
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today
Features:
https://github.com/crdroidandroid/crdroid_features/blob/13.0/README.mkdn
Flashing Instructions:
Pre-installation:
- Recovery (from download page, recovery button)
- NikGapps core (Download from here - note that you may also need setup wizard addon if you rely on Google restore)
- Magisk root (after first boot)
First time installation:
- Backup your data to PC, OTG flash drive
- Boot to fastboot and flash recovery
-
Code:
fastboot flash recovery recovery.img - Now boot to recovery by holding VOL UP + POWER
- Navigate to Factory reset and format data, wipe cache and wipe system
- Now reboot to recovery
- Navigate to Apply update and choose from adb (if you have crDroid.zip on external sdcard, you may choose this option and navigate to where the zip is)
- Now sideload crDroid zip
-
Code:
adb sideload crDroid.zip - If you are running with gapps, choose again to apply from adb and sideload gapps.zip
- Reboot to system
Update installation:
Via recovery
- Boot to recovery
- Navigate to Apply update and choose from adb (if you have crDroid.zip on external sdcard, you may choose this option and navigate to where the zip is)
- Now sideload crDroid zip
-
Code:
adb sideload crDroid.zip
- Go to Settings -> System -> Updater and download latest build
- Choose install and let it finish
- Reboot
Sources:
ROM: https://github.com/crdroidandroid
Kernel source: https://github.com/crdroidandroid/android_kernel_xiaomi_sdm845
Download:
ROM https://crdroid.net/beryllium/9
Visit official website @ crDroid.net
crDroid Poco Telegram
crDroid Community Telegram
If you like my work, consider a donation > My Paypal15Build 20230113 is ready
Changelog: https://crdroid.net/beryllium/9#changelog
Download: https://crdroid.net/beryllium/914
I don't know how your official twrp is able to decrypt, encrypted ROMs since it's not working. Are u sure encrypted?
Recommended is to do Clean Install from one Android version to another. However you can try my Dirty Installation guide below.
Official way of installation via crDroid recovery can be found in OP.
Installation Guide:
Clean Install via TWRP:
- Backup your data.
- Downland TWRP by REIGNZ v2 (A12_System_Ext version - Current Bugs & Workarounds), crDroid ROM, A13 GApps of your choice and optional crDroid recovery if you want to use that later.
- Boot, flash and reboot to TWRP.
- Select Wipe > Advanced Wipe -> Select Dalvik / ART Cache, System, System_EXT, Data, Internal Storage, Vendor, Cache and then Swipe to Wipe.
- Reboot to recovery once again (need due to a current issue with twrp by reignz) and then Format data > type yes.
- Transfer the ROM while you are connected and into TWRP from PC to Device. (TWRP by REIGNZ3 have issue, if PC doesn't recognize the device, press in twrp menu, advanced > file manager > and find and select sdcard folder aka Internal Storage > go back and now pc should be able to recognize the device)
If you have SDcard or USB OTG you can also use that. - Flash ROM, GApps. NOTE: ROM IS FORCE ENCRYPTED
- [Optional] Flash crDroid recovery.
- [Optional] If you want to stay decrypted, use TWRP by REIGNZ but based on A9. Mount Vendor and flash DFE A13. Do not use OTA if you are decrypted, update via dirty installation.
- Reboot and Enjoy!
Warning
- Only use OTA if you are encrypted. Simply go to updater and press install.
Dirty Installation via TWRP:
Manually Upgrade/Update the ROM
- Download the latest build of crDroid ROM, A13 GApps of your choice and use TWRP by REIGNZ v2 (A12_System_Ext version - Current Bugs & Workarounds).
- Wipe System, System_Ext, Dalvik ART/ Cache, Cache, Vendor.
- Flash ROM, GApps.
- [Optional] If you are decrypted, Mount Vendor and flash DFE A13.
- Reboot and Enjoy!
- If you want to be encrypted, recommended is to do one Clean Install according to guide and afterwards you can do OTA updates.
- If you are decrypted and you want to stay decrypted, do Dirty Install according to guide and do not use OTA.
- If you encounter Fastboot issues read the guide/fix in my thread.
- You can translate the ROM in Crowdin.
13Build 20230217 is ready
Changelog: https://crdroid.net/beryllium/9#changelog
Download: https://crdroid.net/beryllium/912Build 20230108 is ready
Changelog: https://crdroid.net/beryllium/9#changelog
Download: https://crdroid.net/beryllium/9
