[ROM][13][clover] LineageOS 20 for Xiaomi Mi Pad 4 [UNOFFICIAL]

Search This thread

CityKev

Senior Member
Jul 27, 2022
99
38
Redmi Note 10 Pro
A question for those that have switched from the Lineage 19 ROM to this one. Are there any major advantages other than it is good to have the latest Android version on a device that was never officially updated?

I've found the 19 ROM to be absolutely great and everything I need works perfectly. If it were just a case of a standard upgrade with a factory reset then I'd go for it but it does seem to be a bit trickier than that.
 

25agosto

Senior Member
Oct 6, 2012
68
5
Varese
Still gyroscope not working (and not found by a troubleshooting app)
Just redone everything from the start, the very start:
Restored default Chinese rom shipped with the tab with the tool xiaomitool v2
Restored every (maybe) messed up partition with the tool above
Installed latest official twrp.
Jumped into recovery, format data (typing yes) then system/cache/vendor (this last one maybe was not to format?)
Installed Los 20 adding to queue, zip of nikgapps and magisk (even if at this time I don't need it, just future proof) and booted into Los 20 successfully. Except for the gyroscope not working again
 

kyasu

Senior Member
Sep 23, 2012
649
2,959
Tokyo
Still gyroscope not working (and not found by a troubleshooting app)
Just redone everything from the start, the very start:
Restored default Chinese rom shipped with the tab with the tool xiaomitool v2
Restored every (maybe) messed up partition with the tool above
Installed latest official twrp.
Jumped into recovery, format data (typing yes) then system/cache/vendor (this last one maybe was not to format?)
Installed Los 20 adding to queue, zip of nikgapps and magisk (even if at this time I don't need it, just future proof) and booted into Los 20 successfully. Except for the gyroscope not working again
The gyroscope is working fine on my Mi Pad 4. Sorry i can't help you.
 

sanzraul

Member
Nov 16, 2014
11
0
El giroscopio aún no funciona (y no lo encuentra una aplicación de solución de problemas)
Acabo de rehacer todo desde el principio, desde el principio:
ROM china con defecto restaurada enviada con la pestaña con la herramienta xiaomitool v2
Restaurado cada (tal vez) partición en mal estado con la herramienta anterior
Instalado el último twrp oficial.
Saltó a la recuperación, formatee los datos (escribiendo sí) y luego sistema/caché/proveedor (¿este último tal vez no fue para formatear?)
Instalé Los 20 agregando a la cola, zip de nikgapps y magisk (incluso si en este momento no lo necesito, solo prueba futura) y arranqué Los 20 con éxito. Excepto por el giroscopio que no vuelve a funcionar.
Everything works for me, including the gyroscope. I've been using the latest version for 4 days and I haven't found any problems. There is sound, NETFLIX and Disney+ work. Connection with bluetooth headphones by APTX. Everything very fluid. Battery discharge without excesses. As a launcher I use the NOVA. The audio jack also works.
 
Last edited:
It is impossible. Formatting DATA erases the internal storage. Factory reset is different from formatting data.
OMG very sorry, my bad. I only wiped the Data partition instead of Format Data, the reason is I want to keep my data. Yes, I'll try another time when I have time to back up my storage. Thank you for your patience.
 

RealNBB

Senior Member
Aug 18, 2014
297
136
A mi me funciona todo, incluido el giroscopio. Llevo 4 dias con la ultima version y no encuentro ningun problema. Hay sonido, NETFLIX y Disney+ funcionan. Conexión con auriculares bluetooth por APTX. Todo muy fluido. Descarga de bateria sin excesos. Como lanzador utilizo el NOVA. El Jack de audio también funciona.

What do you wrote? Sry...my translator is broken. :(
 

sanzraul

Member
Nov 16, 2014
11
0
What do you wrote? Sry...my translator is broken. :(
Everything works for me, including the gyroscope. I've been using the latest version for 4 days and I haven't found any problems. There is sound, NETFLIX and Disney+ work. Connection with bluetooth headphones by APTX. Everything very fluid. Battery discharge without excesses. As a launcher I use the NOVA. The audio jack also works.

I'm sorry
 
Last edited:

25agosto

Senior Member
Oct 6, 2012
68
5
Varese
GYROSCOPE ISSUE SOLVED!
After googling here and there, I found a lot of people with the same problem in several different roms. The solution was posted by this guy here
https://forum.xda-developers.com/t/no-auto-rotate-on-any-custom-rom.3880344/post-85197615
I've download his attachment, made a new folder in TWRP - BACKUPS - RANDOMNAME and extract the content of zip there. Then, after a backup of my actual persist image, I've install over it (or better, restored) the downloaded one, reboot, and TA-DAA Everything working fine
 
Jun 17, 2021
43
6
For decrypt support of A12/13 FBE (file based encryption), TWRP 3.7.0_12 (12.1 branch) is required. The official TWRP 3.6.2_9/3.7.0_9 is 9 branch that doesn't support A12/13 FBE. The kernel version doesn't matter.
For switching between my LOS 19 (no encryption) and my LOS 20 (A13 FBE), formatting data is required.
Where can I find twrp 3.7.0_12 for clover ?
 

kyasu

Senior Member
Sep 23, 2012
649
2,959
Tokyo
Ah. So you are saying you would need TWRP 3.7.0_12 to install this ROM without formatting data but as it doesn't exist you have to?

Is 3.7.0_9-0 the correct version?
We would need non-existing TWRP 3.7.0_12 to decrypt A12/A13 FBE data partition. Formatting data is required to switch from non-FBE data partition to FBE data partition even with non-existing TWRP 3.7.0_12.
The official one (3.7.0_9-0) is the correct version.
 

beOJZ

New member
Nov 10, 2022
2
0
I didn't find a shortcut to take a screenshot by sliding down three fingers in los20. Also, is there any way to make the unlocking interface landscape screen?
 

asoluter

Member
Feb 11, 2020
5
3
Hi, does any1 get constant low volume static noise from the speakers? Not sure whether it's new rom or hardware issue, but I didn't notice it with LOS 19.1

UPD. It's gone after reboot, but appears again after some time
 
Last edited:

lorañep

Member
Nov 2, 2018
13
2
A question for those that have switched from the Lineage 19 ROM to this one. Are there any major advantages other than it is good to have the latest Android version on a device that was never officially updated?

I've found the 19 ROM to be absolutely great and everything I need works perfectly. If it were just a case of a standard upgrade with a factory reset then I'd go for it but it does seem to be a bit trickier than that.
But why do you want to install the latest rom with android 13 if the rom 19.1 with android 12 is going great? Do you know how many years it will take for version 12 to be obsolete? The mi pad 10 will be out by then! You have to delete everything to install 13, it's not worth it! at least for a few years.
 
  • Like
Reactions: CityKev

asoluter

Member
Feb 11, 2020
5
3
But why do you want to install the latest rom with android 13 if the rom 19.1 with android 12 is going great? Do you know how many years it will take for version 12 to be obsolete? The mi pad 10 will be out by then! You have to delete everything to install 13, it's not worth it! at least for a few years.
Well, google backup restoring app data has become pretty good nowadays, so not so much to loose (not counting other backup options)
 

Top Liked Posts

  • There are no posts matching your filters.
  • 10
    I uploaded the new build (lineage-20.0-20230320-UNOFFICIAL-clover.zip).
    Android 13 QPR2 (Quarterly Platform Releases) with March security patch.
    Android security update date is 2023-03-05.
    1
    I have updated to the new version without incident. I have done a dirty update and everything works fine for me. Thanks for the update.
    1
    works great, thx a lot
  • 29

    2okPze5.png

    LineageOS is a free, community built, aftermarket firmware distribution of Android 13, which is designed to increase performance and reliability over stock Android for your device.

    LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.

    This is an unofficial LineageOS 20 build for the Xiaomi Mi Pad 4 (clover).

    Known Issues
    • Please tell me
    Instructions
    1. Flash twrp-3.7.0_12-0-clover-4.4.img created by sabarop by fastboot.
    2. Boot to the flashed TWRP recovery (Vol UP + Power)
    3. Format Data (backup sdcard before format) if MIUI/LOS-19.1 was previously installed
    4. Flash ROM (lineage-*.zip)
    5. Flash Gapps (MindTheGapps-13.0.0-arm64 is recommended)
    6. Reboot
    Enjoy!

    NOTES
    • Safetynet can pass on this ROM (without magisk).
    Downloads
    All: https://androidfilehost.com/?w=files&flid=327361
    LineageOS 20: lineage-20.0-20230320-UNOFFICIAL-clover.zip

    Sources
    https://github.com/kyasu/android_device_xiaomi_sdm660-common
    https://github.com/kyasu/android_device_xiaomi_clover
    https://github.com/kyasu/android_kernel_xiaomi_sdm660
    https://github.com/kyasu/android_vendor_xiaomi_sdm660-common
    https://github.com/kyasu/android_vendor_xiaomi_clover

    Contributors
    LineageOS team, kyasu

    ROM OS Version: Android 13
    ROM Kernel: Linux 4.4
    Based On: LineageOS
    Status: Stable

    Created 2022-11-04
    Last Updated 2023-03-20
    13
    I uploaded the new build (lineage-20.0-20230106-UNOFFICIAL-clover.zip).
    Android security update date is 2023-01-05.

    Please flash ROM and Gapps to update.
    11
    I uploaded the new build (lineage-20.0-20230212-UNOFFICIAL-clover.zip).
    Android security update date is 2023-02-05.
    Merged twu2's charging patch.
    11
    I uploaded the new build (lineage-20.0-20221210-UNOFFICIAL-clover.zip).
    Android 13 QPR1 (Quarterly Platform Releases) with December security patch.
    Android security update date is 2022-12-05.
    10
    I uploaded the new build (lineage-20.0-20230320-UNOFFICIAL-clover.zip).
    Android 13 QPR2 (Quarterly Platform Releases) with March security patch.
    Android security update date is 2023-03-05.