[𝑹𝑶𝑴][𝟏𝟑]LineageOS 20.0 unofficial[𝑶𝑵𝑬𝑷𝑳𝑼𝑺 𝟔&6T][Gapps][OTA updates][SafetyNet][TWRP]

[ashish1989]

Ok, now I get it: it's not about the status bar itself but apps utilising full screen... Makes sense then, thank you.

Yes, that's my whole point

 

[Krunal Chandra]

What's the difference between this one and the offical one?

 

[Zedlav]

The fingerprint reader stopped working for me, It does not even seem to try to scan my finger, like it turns on but I dont get an error of wrong finger or anything. It does not work for unlocking the phone or access apps. I am on update from 1/7, but the updater says I am up to date.

 

[lm089]

The fingerprint reader stopped working for me, It does not even seem to try to scan my finger, like it turns on but I dont get an error of wrong finger or anything. It does not work for unlocking the phone or access apps. I am on update from 1/7, but the updater says I am up to date.

Have you tried resetting it? I remember I had this once, with a different ROM, and a while ago.

What I did then:
Settings > Security > remove Display lock >> set it to "none"
reboot (don't know whether that was necessary, but it didn't hurt either)
Then set a new locking pattern + setup fingerprint reader

Good luck!

 

[ashish1989]

Can anybody please use this module and check if the notch killer is working in this rom. Do enable the same from developer options. Most important check youtube video full screen, if the video gets cut out by notch or not.

 

[Zedlav]

Have you tried resetting it? I remember I had this once, with a different ROM, and a while ago.

What I did then:
Settings > Security > remove Display lock >> set it to "none"
reboot (don't know whether that was necessary, but it didn't hurt either)
Then set a new locking pattern + setup fingerprint reader

Good luck!

Restarting the phone made it work for the first unlock, but then stops working altogether again. I will try these steps and see if it works, thanks!
EDIT: removing the pattern and fingerprint, rebooting and creating a new pattern and fingerprint worked, thanks!

 

[rhesus5911]

hi everybody,
is it possible to install the rom with another (reduced) gapps instead of the integrated MindtheGapps? NikGapps oder microG?
perhaps: Install rom > flash twrp > reboot revovery > install gapps ?

 

[alp47470]

hi everybody,
is it possible to install the rom with another (reduced) gapps instead of the integrated MindtheGapps? NikGapps oder microG?
perhaps: Install rom > flash twrp > reboot revovery > install gapps ?

1+

 

[dadhiemer]

how to fix sometimes my 6t get crashdump

 

[Zedlav]

Restarting the phone made it work for the first unlock, but then stops working altogether again. I will try these steps and see if it works, thanks!
EDIT: removing the pattern and fingerprint, rebooting and creating a new pattern and fingerprint worked, thanks!

So, this happened again today. I don't know if its usual for it to be so quickly recurrent. Only one thing was different though, it seemed to be attempting to read my fingerprint but failing to do so every time, saying that it was wrong every single time. Disabling the pattern and re-doing it all again solved it for now, but seems like it may come back to haunt me again sometime soon. Just throwing this out here in case it's something that could be patched.

 

[lm089]

saying that it was wrong every single time

I do have this occasionally, in those cases I use a different finger (I usually have the maximum of 5 prints setup, as - you never know), and one of those usually works.
Apart from that, no idea really. Maybe a hardware problem? Guess you already tried to clean the reader's surface...

 

[Zedlav]

I do have this occasionally, in those cases I use a different finger (I usually have the maximum of 5 prints setup, as - you never know), and one of those usually works.
Apart from that, no idea really. Maybe a hardware problem? Guess you already tried to clean the reader's surface...

I did have 3 fingerprints setup, well 2 for the right thumb and 1 for the left thumb, but neither worked. I did clean the surface yes, but It did not help. I have done the whole setup again, and it is currently working as it should, but I am dreadfully waiting for the moment I have to redo it again haha

 

[TheVoice70]

@Kitch2400 and all

MGC_8.7.250_A11_V7​

Update:

BSG: MGC_8.7.250_A11_V7

Download MGC_8.7.250_A11_V7 by BSG.

www.celsoazevedo.com

Changelog:​

BSG public version changelog (8.7.250 from 2023/01/27):
- Extended range of Enhanced HDR+ frames (Photo\Portrait - 1 ... 45 frames, Night mode - 1 .. 40 frames).
- The algorithm of the automatic number of frames has been changed, visualization has been added (not completely filling the circle, full circle = 45 frames).
- Menu items: "Sharpen strength factor", "Dehaze strength factor", "Chroma strength factor", "Luma strength factor", "Luma revert factor", "Luma outlier threshold factor" divided into "Off / Auto HDR+ / HDR Net" and "Enhanced HDR+ / Night Sight".
- "Exposure correction" has been added to the module settings (the correction algorithm has been changed (relative to 8.6) for more correct operation).
- Added the ability to load the config by double tapping near the "Start" button.
- Found errors in the work of the modification have been fixed.
- Fixed work on some devices.

Checked on 6 / 6T

 

[Bäcker]

I've been using this ROM for quite a while now, several month for sure.

No crashes and for me the fingerprint reader works every time.

 

[ashish1989]

I've been using this ROM for quite a while now, several month for sure.

No crashes and for me the fingerprint reader works every time.

Can you please test this module, if it is working or not

[𝑹𝑶𝑴][𝟏𝟑]LineageOS 20.0 unofficial[𝑶𝑵𝑬𝑷𝑳𝑼𝑺 𝟔&6T][Gapps][OTA updates][SafetyNet][TWRP]

LineageOS 20.0 unofficial build for enchilada & fajita Source: LineageOS 20 (android-13.0.0_r20) Buildtype: User Kernel: 4.9.336 SELinux: Enforcing Recovery: TWRP 3.7.0, Thanks to @Siddk for your hard work!!! Root: Download the most...

forum.xda-developers.com

 

[ademsahinnn]

Hello,

I am using oneplus 6. I have used custom roms on many models before, but I did not have such an experience for Oneplus. How do I unlock the device? How to install custom recovery? Can anyone help with this knowledge?

 

[TheVoice70]

I've been using this ROM for quite a while now, several month for sure.

No crashes and for me the fingerprint reader works every time.

Agree .... no problems .... no crashes .... works perfect.

 

[lm089]

Hello,

I am using oneplus 6. I have used custom roms on many models before, but I did not have such an experience for Oneplus. How do I unlock the device? How to install custom recovery? Can anyone help with this knowledge?

There are many sources here at xda explaining what you need to know.
You may want to start with this thread, explain how to unlock bootloader :

OnePlus 6: Unlock Bootloader | Flash TWRP | Root | Nandroid & EFS Backup !!

OnePlus 6: Unlock Bootloader | Flash TWRP | Root | Nandroid & EFS Backup !! Before you start, OTA up to the latest System Update available. Settings > System Updates > Download & Install the latest available Thank You all for your...

forum.xda-developers.com

Then go ahead with the instructions given in the OP of this thread here.
But before you begin make sure you have updated your device to the very latest official OOS version.
Good luck!

 

[alp47470]

lineage-20.0-20230126-nightly-fajita-signed.zip is out now. Any update by you coming this week ? Also what's the actual difference between this and the one mentioned above?

 

[TheVoice70]

@Kitch2400 and all​

​

MGC_8.7.250_A11_V8​

BSG: MGC_8.7.250_A11_V8

Download MGC_8.7.250_A11_V8 by BSG.

www.celsoazevedo.com

Changelog:​

BSG public version changelog (8.7.250 from 2023/02/04):
- Added support for a third-party gallery (the modification is completely untethered from Google photos).
- Added "RAW Compression", "DotsFix" and "Color Filters Arrangement" to module settings.
- "camera.nonzsl_net_recompute_frame", "camera.min_bracketing_frames" and "camera.max_bracketing_frames" items added to dev.settings.
- Added "System factor" to the "SHASTA" module menu item.
- Fixed the algorithm of the "HDRnet" mode for non-Pixel devices, added support for the "number of frames" for this mode.
- "Auto Night Mode" (in "Photo" and "Portrait" modes) is connected to "Frames" and "Advanced Settings" of Night Sight.
- Found errors in the work of the modification have been fixed.
- Fixed work on some devices.

Checked on 6 / 6T