[ROM][13][Mi A2] PixelExperience [AOSP]

[Immanuel Raj]

Yes, I understand, and for me it was quite likely that it was done with third party drivers.

That's why I proposed to collect information on any different hardware versions, hoping to find a common version in the various groups of phones (high and low volume).
Then it would just be a matter of applying the necessary settings according to the detected version.

Or a manual option, and issue closed.

Yah but i have no idea what possibly i need to chek. I have very little time for these stuff apart from my life so will see

 

[gius db]

Yah but i have no idea what possibly i need to chek. I have very little time for these stuff apart from my life so will see

I think in ARM it's a big mess to do that.

In your shoes I would think I've done more than enough, and I wouldn't go near the idea of doing it even in a fireproof suit.

Thanks for your work, and have good things in your life.

 

[Wildan Rizki N]

Hello sir, the battery percentage isnt available?
I'm using the PixelExperience_Plus_jasmine_sprout-13.0-20230520-1620-OFFICIAL.zip version

Edit :
I founded the setting to show the battery percentage on status bar

 

[Immanuel Raj]

Hello sir, the battery percentage isnt available?
I'm using the PixelExperience_Plus_jasmine_sprout-13.0-20230520-1620-OFFICIAL.zip version

Explain what do you mean by that

 

[sandeep81689]

cant install the package it shows error applying update 7 error code kinstall device open error
update process ended with error 1
help me to fix this error

 

[Immanuel Raj]

cant install the package it shows error applying update 7 error code kinstall device open error
update process ended with error 1
help me to fix this error

Follow the install instruction in the site

 

[boyturnot15]

i have a error problem "error 28" ? how can i fix that help pls

 

[Immanuel Raj]

i have a error problem "error 28" ? how can i fix that help pls

Use usb 2.0
Use usb 3.0
Change cable
Follow flashing instruciton

 

[mohdizwan]

I was doing it that way:
- install magisk apk
- go to pixel recovery and sideload magisk.zip
- reboot go to magisk and install magisk directly
- reboot

Thank you!!

 

[shanky1802]

Note : Flash latest firmware before following this guide or device will brick / Also Backup your all important data as this process will wipe everything on the internal.

Note : Boot your device with the stock OS at least once and check every functionality. Make sure that you can send and receive SMS and place and receive calls (also via WiFi and LTE, if available), otherwise it won’t work on PixelExperience either!

I am not responsible for anything / You are on your own Good luck!

step 1 : Reboot to bootloader or fastboot
command
step 2 : flash boot.img provided (compulsory) using this link https://download.pixelexperience.org/jasmine_sprout
Command - [fastboot flash boot <recovery_filename>.img]

step 3 : now boot to recovery which you flashed in step 2
Command - [volume up + power button until Bootlogo]

step 4 : Now download this https://github.com/PixelExperience-...in/copy-partitions-20210323_1922.zip?raw=true

step 5 : Now go to apply update > apply update using ADB

step 6 : Now type below command to sideload
command - [adb sideload copy-partitions-20210323_1922.zip]

step 7 : Now Reboot to recovery

step 8 : Now download super_empty partition zip using https://github.com/PixelExperience-...rout/releases/download/v1.0.0/super_empty.img

step 9 : Again go to recovery
Command - [volume up + power button until Bootlogo]

step 10 : Go to Advanced > Enter Fastboot

step 11 : Now type below command on terminal
command - fastboot wipe-super <super_empty>.img

step 12 : Now reboot recovery for safe side
Command - [volume up + power button until Bootlogo]

step 13 : Now download Pixel Experience Official Rom A13

step 14 : Go to recovery if not
Command - [volume up + power button until Bootlogo]

step 15 : Go to Factory Reset > Format Data
Note : This will wipe everything on your device kindly make sure you have already backedup

step 16 : return to main menu of recovery

step 17 : Now sideload the rom zip using below command
Command - adb sideload "rom-name".zip

TIP: If the installation process reports the message "(~47%) adb: failed to read the command: No error", do not worry, the process was completed successfully and you can restart the device.

step 18 : now after completing go to main menu of recovery and format data again
Follow > Factory Reset > Format Data

step 19 : Go to Main Menu > Reboot system now

step 20 : Enjoy your A13 rom with dynamic partition

Telegram user @aakashxxrathod

It shows an error,
fastboot: usage: unknown command wipe-super
what to do?

 

[Hikaruichijosdf1]

Immanuel Raj​

Thanks again for your work, updated via OTA to the latest build and everything is working, still errors and warnings in the logs but for my daily usage I didn't find any problems. So, an Android 13 phone that is five years old and has better specs than some phones that you can buy new today.

 

[madpixelove]

After Installing OTA update, my USB don't work no ADB no nothing, what do i do?
I tried Rebooting to fastboot mode and wait for few seconds and then reboot to system, Still no usb

 

[Immanuel Raj]

It shows an error,
fastboot: usage: unknown command wipe-super
what to do?

Read the flashing instruction and blindly forllow it please. You will have a smooth process

 

[Immanuel Raj]

After Installing OTA update, my USB don't work no ADB no nothing, what do i do?
I tried Rebooting to fastboot mode and wait for few seconds and then reboot to system, Still no usb

Try rebooting to fastboot with the usb plugged in

 

[Jacekalex]

HI
Previously I used: lineage-18.1-20221003-microG-jasmine_sprout.zip

I installed PixelExperience_jasmine_sprout-13.0-20230520-1621-OFFICIAL.zip

This rom cannot connect to the router using wpa2 PEAP authentication.

Log from Router (OpenWRT):

023 Jun  8 12:18:50 Routerek radiusd[3260]: (6274) Login OK: [andek/<via Auth-Type = eap>] (from client router port 2 cli 72-11-C7-95-C3-4E)
2023 Jun  8 12:18:50 Routerek hostapd: wlan1: CTRL-EVENT-EAP-SUCCESS2 72:11:c7:95:c3:4e
2023 Jun  8 12:18:50 Routerek hostapd: wlan1: STA 72:11:c7:95:c3:4e WPA: pairwise key handshake completed (RSN)
2023 Jun  8 12:18:50 Routerek hostapd: wlan1: AP-STA-CONNECTED 72:11:c7:95:c3:4e
2023 Jun  8 12:18:50 Routerek hostapd: wlan1: STA 72:11:c7:95:c3:4e RADIUS: starting accounting session 1E09F113E03D6325
2023 Jun  8 12:18:50 Routerek hostapd: wlan1: STA 72:11:c7:95:c3:4e IEEE 802.1X: authenticated - EAP type: 25 (PEAP)
2023 Jun  8 12:18:50 Routerek hostapd: wlan1: AP-STA-DISCONNECTED 72:11:c7:95:c3:4e
2023 Jun  8 12:18:50 Routerek hostapd: wlan1: STA 72:11:c7:95:c3:4e IEEE 802.11: disassociated
2023 Jun  8 12:18:51 Routerek hostapd: wlan1: STA 72:11:c7:95:c3:4e IEEE 802.11: deauthenticated due to inactivity (timer DEAUTH/REMOVE)
2023 Jun  8 12:18:54 Routerek hostapd: wlan1: STA 72:11:c7:95:c3:4e IEEE 802.11: authenticated
2023 Jun  8 12:18:54 Routerek hostapd: wlan1: STA 72:11:c7:95:c3:4e IEEE 802.11: associated (aid 2)
2023 Jun  8 12:18:54 Routerek hostapd: wlan1: CTRL-EVENT-EAP-STARTED 72:11:c7:95:c3:4e
2023 Jun  8 12:18:54 Routerek hostapd: wlan1: CTRL-EVENT-EAP-PROPOSED-METHOD vendor=0 method=1
2023 Jun  8 12:18:54 Routerek radiusd[3260]: (6285)   Login OK: [andek/<via Auth-Type = eap>] (from client router port 2 cli 72-11-C7-95-C3-4E via TLS tunnel)
2023 Jun  8 12:18:54 Routerek radiusd[3260]: (6286) Login OK: [andek/<via Auth-Type = eap>] (from client router port 2 cli 72-11-C7-95-C3-4E)
2023 Jun  8 12:18:54 Routerek hostapd: wlan1: CTRL-EVENT-EAP-SUCCESS2 72:11:c7:95:c3:4e
2023 Jun  8 12:18:54 Routerek hostapd: wlan1: STA 72:11:c7:95:c3:4e WPA: pairwise key handshake completed (RSN)
2023 Jun  8 12:18:54 Routerek hostapd: wlan1: AP-STA-CONNECTED 72:11:c7:95:c3:4e
2023 Jun  8 12:18:54 Routerek hostapd: wlan1: STA 72:11:c7:95:c3:4e RADIUS: starting accounting session 6A71BB99DEC5E4D5
2023 Jun  8 12:18:54 Routerek hostapd: wlan1: STA 72:11:c7:95:c3:4e IEEE 802.1X: authenticated - EAP type: 25 (PEAP)
2023 Jun  8 12:18:55 Routerek hostapd: wlan1: AP-STA-DISCONNECTED 72:11:c7:95:c3:4e
2023 Jun  8 12:18:55 Routerek hostapd: wlan1: STA 72:11:c7:95:c3:4e IEEE 802.11: disassociated
2023 Jun  8 12:18:56 Routerek hostapd: wlan1: STA 72:11:c7:95:c3:4e IEEE 802.11: deauthenticated due to inactivity (timer DEAUTH/REMOVE)
2023 Jun  8 12:18:58 Routerek hostapd: wlan1: STA 72:11:c7:95:c3:4e IEEE 802.11: authenticated
2023 Jun  8 12:18:58 Routerek hostapd: wlan1: STA 72:11:c7:95:c3:4e IEEE 802.11: associated (aid 2)
2023 Jun  8 12:18:58 Routerek hostapd: wlan1: CTRL-EVENT-EAP-STARTED 72:11:c7:95:c3:4e
2023 Jun  8 12:18:58 Routerek hostapd: wlan1: CTRL-EVENT-EAP-PROPOSED-METHOD vendor=0 method=1
2023 Jun  8 12:18:59 Routerek radiusd[3260]: (6297)   Login OK: [andek/<via Auth-Type = eap>] (from client router port 2 cli 72-11-C7-95-C3-4E via TLS tunnel)
2023 Jun  8 12:19:00 Routerek radiusd[3260]: (6298) Login OK: [andek/<via Auth-Type = eap>] (from client router port 2 cli 72-11-C7-95-C3-4E)
2023 Jun  8 12:19:00 Routerek hostapd: wlan1: CTRL-EVENT-EAP-SUCCESS2 72:11:c7:95:c3:4e
2023 Jun  8 12:19:00 Routerek hostapd: wlan1: STA 72:11:c7:95:c3:4e WPA: pairwise key handshake completed (RSN)
2023 Jun  8 12:19:00 Routerek hostapd: wlan1: AP-STA-CONNECTED 72:11:c7:95:c3:4e
2023 Jun  8 12:19:00 Routerek hostapd: wlan1: STA 72:11:c7:95:c3:4e RADIUS: starting accounting session CB0C833923590422
2023 Jun  8 12:19:00 Routerek hostapd: wlan1: STA 72:11:c7:95:c3:4e IEEE 802.1X: authenticated - EAP type: 25 (PEAP)
2023 Jun  8 12:19:00 Routerek hostapd: wlan1: AP-STA-DISCONNECTED 72:11:c7:95:c3:4e
2023 Jun  8 12:19:00 Routerek hostapd: wlan1: STA 72:11:c7:95:c3:4e IEEE 802.11: disassociated
2023 Jun  8 12:19:01 Routerek hostapd: wlan1: STA 72:11:c7:95:c3:4e IEEE 802.11: deauthenticated due to inactivity (timer DEAUTH/REMOVE)

Android 11 connects to this network without any problems with the same connections parameters.
How to fix it?

Cheers

 

[Immanuel Raj]

HI
Previously I used: lineage-18.1-20221003-microG-jasmine_sprout.zip

I installed PixelExperience_jasmine_sprout-13.0-20230520-1621-OFFICIAL.zip

This rom cannot connect to the router using wpa2 PEAP authentication.

Log from Router (OpenWRT):

023 Jun  8 12:18:50 Routerek radiusd[3260]: (6274) Login OK: [andek/<via Auth-Type = eap>] (from client router port 2 cli 72-11-C7-95-C3-4E)
2023 Jun  8 12:18:50 Routerek hostapd: wlan1: CTRL-EVENT-EAP-SUCCESS2 72:11:c7:95:c3:4e
2023 Jun  8 12:18:50 Routerek hostapd: wlan1: STA 72:11:c7:95:c3:4e WPA: pairwise key handshake completed (RSN)
2023 Jun  8 12:18:50 Routerek hostapd: wlan1: AP-STA-CONNECTED 72:11:c7:95:c3:4e
2023 Jun  8 12:18:50 Routerek hostapd: wlan1: STA 72:11:c7:95:c3:4e RADIUS: starting accounting session 1E09F113E03D6325
2023 Jun  8 12:18:50 Routerek hostapd: wlan1: STA 72:11:c7:95:c3:4e IEEE 802.1X: authenticated - EAP type: 25 (PEAP)
2023 Jun  8 12:18:50 Routerek hostapd: wlan1: AP-STA-DISCONNECTED 72:11:c7:95:c3:4e
2023 Jun  8 12:18:50 Routerek hostapd: wlan1: STA 72:11:c7:95:c3:4e IEEE 802.11: disassociated
2023 Jun  8 12:18:51 Routerek hostapd: wlan1: STA 72:11:c7:95:c3:4e IEEE 802.11: deauthenticated due to inactivity (timer DEAUTH/REMOVE)
2023 Jun  8 12:18:54 Routerek hostapd: wlan1: STA 72:11:c7:95:c3:4e IEEE 802.11: authenticated
2023 Jun  8 12:18:54 Routerek hostapd: wlan1: STA 72:11:c7:95:c3:4e IEEE 802.11: associated (aid 2)
2023 Jun  8 12:18:54 Routerek hostapd: wlan1: CTRL-EVENT-EAP-STARTED 72:11:c7:95:c3:4e
2023 Jun  8 12:18:54 Routerek hostapd: wlan1: CTRL-EVENT-EAP-PROPOSED-METHOD vendor=0 method=1
2023 Jun  8 12:18:54 Routerek radiusd[3260]: (6285)   Login OK: [andek/<via Auth-Type = eap>] (from client router port 2 cli 72-11-C7-95-C3-4E via TLS tunnel)
2023 Jun  8 12:18:54 Routerek radiusd[3260]: (6286) Login OK: [andek/<via Auth-Type = eap>] (from client router port 2 cli 72-11-C7-95-C3-4E)
2023 Jun  8 12:18:54 Routerek hostapd: wlan1: CTRL-EVENT-EAP-SUCCESS2 72:11:c7:95:c3:4e
2023 Jun  8 12:18:54 Routerek hostapd: wlan1: STA 72:11:c7:95:c3:4e WPA: pairwise key handshake completed (RSN)
2023 Jun  8 12:18:54 Routerek hostapd: wlan1: AP-STA-CONNECTED 72:11:c7:95:c3:4e
2023 Jun  8 12:18:54 Routerek hostapd: wlan1: STA 72:11:c7:95:c3:4e RADIUS: starting accounting session 6A71BB99DEC5E4D5
2023 Jun  8 12:18:54 Routerek hostapd: wlan1: STA 72:11:c7:95:c3:4e IEEE 802.1X: authenticated - EAP type: 25 (PEAP)
2023 Jun  8 12:18:55 Routerek hostapd: wlan1: AP-STA-DISCONNECTED 72:11:c7:95:c3:4e
2023 Jun  8 12:18:55 Routerek hostapd: wlan1: STA 72:11:c7:95:c3:4e IEEE 802.11: disassociated
2023 Jun  8 12:18:56 Routerek hostapd: wlan1: STA 72:11:c7:95:c3:4e IEEE 802.11: deauthenticated due to inactivity (timer DEAUTH/REMOVE)
2023 Jun  8 12:18:58 Routerek hostapd: wlan1: STA 72:11:c7:95:c3:4e IEEE 802.11: authenticated
2023 Jun  8 12:18:58 Routerek hostapd: wlan1: STA 72:11:c7:95:c3:4e IEEE 802.11: associated (aid 2)
2023 Jun  8 12:18:58 Routerek hostapd: wlan1: CTRL-EVENT-EAP-STARTED 72:11:c7:95:c3:4e
2023 Jun  8 12:18:58 Routerek hostapd: wlan1: CTRL-EVENT-EAP-PROPOSED-METHOD vendor=0 method=1
2023 Jun  8 12:18:59 Routerek radiusd[3260]: (6297)   Login OK: [andek/<via Auth-Type = eap>] (from client router port 2 cli 72-11-C7-95-C3-4E via TLS tunnel)
2023 Jun  8 12:19:00 Routerek radiusd[3260]: (6298) Login OK: [andek/<via Auth-Type = eap>] (from client router port 2 cli 72-11-C7-95-C3-4E)
2023 Jun  8 12:19:00 Routerek hostapd: wlan1: CTRL-EVENT-EAP-SUCCESS2 72:11:c7:95:c3:4e
2023 Jun  8 12:19:00 Routerek hostapd: wlan1: STA 72:11:c7:95:c3:4e WPA: pairwise key handshake completed (RSN)
2023 Jun  8 12:19:00 Routerek hostapd: wlan1: AP-STA-CONNECTED 72:11:c7:95:c3:4e
2023 Jun  8 12:19:00 Routerek hostapd: wlan1: STA 72:11:c7:95:c3:4e RADIUS: starting accounting session CB0C833923590422
2023 Jun  8 12:19:00 Routerek hostapd: wlan1: STA 72:11:c7:95:c3:4e IEEE 802.1X: authenticated - EAP type: 25 (PEAP)
2023 Jun  8 12:19:00 Routerek hostapd: wlan1: AP-STA-DISCONNECTED 72:11:c7:95:c3:4e
2023 Jun  8 12:19:00 Routerek hostapd: wlan1: STA 72:11:c7:95:c3:4e IEEE 802.11: disassociated
2023 Jun  8 12:19:01 Routerek hostapd: wlan1: STA 72:11:c7:95:c3:4e IEEE 802.11: deauthenticated due to inactivity (timer DEAUTH/REMOVE)

Android 11 connects to this network without any problems with the same connections parameters.
How to fix it?

Cheers

Hey, Thanks for reporting. i am not sure what this is. I will investigae on it. Enlighten me more about this protocol and connection method if you can. Also please attatch the mobile devices adb logcat when connection to the wifi. It will be helpful for me to debug and fix it if it is possible

 

[Jacekalex]

Ok:
Router:

2023 Jun 11 12:12:09 Routerek hostapd: wlan0: STA c6:86:c7:a2:de:5b IEEE 802.11: authenticated
2023 Jun 11 12:12:09 Routerek hostapd: wlan0: STA c6:86:c7:a2:de:5b IEEE 802.11: associated (aid 2)
2023 Jun 11 12:12:09 Routerek hostapd: wlan0: CTRL-EVENT-EAP-STARTED c6:86:c7:a2:de:5b
2023 Jun 11 12:12:09 Routerek hostapd: wlan0: CTRL-EVENT-EAP-PROPOSED-METHOD vendor=0 method=1
2023 Jun 11 12:12:09 Routerek radiusd[2041]: (694)   Login OK: [andek/<via Auth-Type = eap>] (from client router port 2 cli C6-86-C7-A2-DE-5B via TLS tunnel)
2023 Jun 11 12:12:09 Routerek radiusd[2041]: (695) Login OK: [andek/<via Auth-Type = eap>] (from client router port 2 cli C6-86-C7-A2-DE-5B)
2023 Jun 11 12:12:09 Routerek hostapd: wlan0: CTRL-EVENT-EAP-SUCCESS2 c6:86:c7:a2:de:5b
2023 Jun 11 12:12:10 Routerek hostapd: wlan0: STA c6:86:c7:a2:de:5b WPA: pairwise key handshake completed (RSN)
2023 Jun 11 12:12:10 Routerek hostapd: wlan0: AP-STA-CONNECTED c6:86:c7:a2:de:5b
2023 Jun 11 12:12:10 Routerek hostapd: wlan0: STA c6:86:c7:a2:de:5b RADIUS: starting accounting session 3ADB906ECF71A106
2023 Jun 11 12:12:10 Routerek hostapd: wlan0: STA c6:86:c7:a2:de:5b IEEE 802.1X: authenticated - EAP type: 25 (PEAP)
2023 Jun 11 12:12:10 Routerek hostapd: wlan0: AP-STA-DISCONNECTED c6:86:c7:a2:de:5b
2023 Jun 11 12:12:10 Routerek hostapd: wlan0: STA c6:86:c7:a2:de:5b IEEE 802.11: disassociated
2023 Jun 11 12:12:11 Routerek hostapd: wlan0: STA c6:86:c7:a2:de:5b IEEE 802.11: deauthenticated due to inactivity (timer DEAUTH/REMOVE)

PixelExperience (7970 lines):

wpa_andek.log

drive.google.com

This rom: lineage-18.1-20221003-microG-jasmine_sprout.zip,
it connects via WPA2 PEAP properly without any problem.

Cheers

 

[Jacekalex]

I need to make changes to some configuration files in /system/etc/
e.g. /system/etc/mkshrc
The root partition where /system/etc is mounted read-only.

/dev/block/dm-0 on / type erofs (ro,seclabel,noatime,user_xattr,acl,cache_strategy=readaround)

mount -o remount,rw /

Whether

mount -o remount,rw /dev/block/dm-0

they bring no result.
How to temporarily mount rootfs privilege in read-write mode?

Cheers

 

[zukashi]

On the latest (20/05/2023) build of pixel experience plus, flash in back camera is not working properly. The flashlight turns off at the exact time of when the picture is clicked and the final picture is dark (without flash).

 

[Hikaruichijosdf1]

On the latest (20/05/2023) build of pixel experience plus, flash in back camera is not working properly. The flashlight turns off at the exact time of when the picture is clicked and the final picture is dark (without flash).

I have the same problem with the Flash in automatic or active mode, any photo ends in a black image if there is little ambient light and the flash is activated. With the flash turned off it works correctly if there is little ambient light and with HDR mode enabled too; HDR mode seems slow, but I don't know if it's normal behavior.
It is impossible to take a picture at night or in low ambient light due to the failure of the flash.
HDR mode improves photography in low ambient light.
I just tried with the Open Camera application and with the Google Camera application installed from the Play store, and they don't have that problem, the flash works correctly.
Google Camera app closes when accessing settings; Open camera seems to work correctly in all aspects.