Development [ROM][13][OFFICIAL] crDroid Android v9.1 [mojito/sunny]

Search This thread

tvrctkmytfln

Member
Jun 24, 2022
11
1
Disable "Gradually increase volume" in clock app settings.
Thank you so much! I'll try.

And I just found another issue which is the voice call has no input. I can record sound with the recorder and WhatsApp, but the voice call has no input. The other one can never hear my voice and I used the voice call recorder to try recording my voice but found my voice cannot be recorded but the other's voice can be recorded. Any suggestions would be appreciated.

I had such issue before when I was using android 11 with Gapps installed on it (both for crDroid and HavocOS), but the issue was solved if I changed to the vanilla version. But on this crDroid android 12 and 13, the issue is always there in built-in dialer and manually-installed Google dialer.

I have tried `mojito_global_images_V13.0.10.0.SKGMIXM_20220829.0000.00_12.0_global` and `mojito_in_global_images_V12.5.6.0.RKGINXM_20220316.0000.00_11.0_in` as the firmware.

Does anyone know what could be the reason?
 
Last edited:

tvrctkmytfln

Member
Jun 24, 2022
11
1
I found I have to toggle the speaker on first and then toggle it off during a call to make it work every time after I boot my phone.
 

tvrctkmytfln

Member
Jun 24, 2022
11
1
Thank you so much! I'll try.

And I just found another issue which is the voice call has no input. I can record sound with the recorder and WhatsApp, but the voice call has no input. The other one can never hear my voice and I used the voice call recorder to try recording my voice but found my voice cannot be recorded but the other's voice can be recorded. Any suggestions would be appreciated.

I had such issue before when I was using android 11 with Gapps installed on it (both for crDroid and HavocOS), but the issue was solved if I changed to the vanilla version. But on this crDroid android 12 and 13, the issue is always there in built-in dialer and manually-installed Google dialer.

I have tried `mojito_global_images_V13.0.10.0.SKGMIXM_20220829.0000.00_12.0_global` and `mojito_in_global_images_V12.5.6.0.RKGINXM_20220316.0000.00_11.0_in` as the firmware.

Does anyone know what could be the reason?
I found I have to toggle the speaker on first and then toggle it off during a call to make it work every time after I boot my phone.
 

Spaceboy60

Senior Member
Dec 22, 2014
831
94
OK, big problem after install. Can't install Gapps, TWRP has been replaced by crdroid recovery.

And when I attach phone to PC I get no notification on phone with regards to being connected to my PC or options to change connection mode, and when I run abd commands or fastboot commands phone simply isn't recognised. Usb debugging is enabled

Tried two different cables, different USB shots to no avail. Any ideas? Miflash doesn't even recognise it now ( has been working fine with PIXELOS, this is the first time I've had PROBLEMS)

Suggestions??
 

x3r0.13urn

Senior Member
Nov 1, 2012
332
132
OK, big problem after install. Can't install Gapps, TWRP has been replaced by crdroid recovery.

And when I attach phone to PC I get no notification on phone with regards to being connected to my PC or options to change connection mode, and when I run abd commands or fastboot commands phone simply isn't recognised. Usb debugging is enabled

Tried two different cables, different USB shots to no avail. Any ideas? Miflash doesn't even recognise it now ( has been working fine with PIXELOS, this is the first time I've had PROBLEMS)

Suggestions??
You are new to A/B device.

Boot to crdroid recovery, choose install update / adb sideload, connect usb and run "adb sideload <your_gapp_zip>", after that format data then reboot.
 

Spaceboy60

Senior Member
Dec 22, 2014
831
94
Back to stock, working fine now. Could be the cable plus Windows issue as all commands are working fine in fedora Linux (they weren't when I had crdroid installed though for some reason)
 

YiMonk

New member
Dec 16, 2022
1
0
Hi! I have a problem, I use version 9.0 and the GPS doesn't work as it should, for example when I send my location it doesn't show where I really am. Is there any solution?

On the other hand, when I use gmaps, it indicates where I am but it does not point to the direction I am going.
 

_.ebin.__

New member
Jan 18, 2021
3
0
Is anybody else facing issues with battery drain. I have a battery drain of atleast 8% when the screen is off and the phones at idle.
And 11-12% drain when screens on
 

Anush02198

Recognized Developer
Feb 15, 2017
282
1,213
Panvel
New Build is UP:-


Changelogs:-
==== 22 January 2023 ====
+ Used latest WCSF
+ Update Blobs from mojito qssi-user 12 SKQ1.210908.001 V13.0.11.0.SKGMIXM release-keys
+ sm6150-common: Switch to legacy sepolicy_vndr
+ sm6150-common:Remove vendor_debugfs_clk
+ sm6150-common: Kill IMS logspam
+ sm6150-common: Clean debug properties for graphics layer
+ sm6150-common: props: Use HintManager for HWUI
+ sm6150-common: Enable config_avoidGfxAccel
+ Alter Partitions to Fit bit larger gapps
+ sm6150-common: Disable blur on app launch
+ sm6150-common: Disable Async MTE on System Server
+ sm6150-common: Switch to SkiaGL
+ sm6150-common: props: Disable Skia tracing by default
+ sm6150-common: Compile HWUI for performance
+ sm6150-common: overlay: Compact cached app heaps in the background
+ sm6150-common: overlay: Allow more cached apps in the background
+ sm6150-common: overlay: Offload WM shell to another thread
+ Enable F2FS Compression
+ Initial User build
 

Top Liked Posts

  • There are no posts matching your filters.
  • 6
    New Build is UP:-


    Changelogs:-
    ==== 22 January 2023 ====
    + Used latest WCSF
    + Update Blobs from mojito qssi-user 12 SKQ1.210908.001 V13.0.11.0.SKGMIXM release-keys
    + sm6150-common: Switch to legacy sepolicy_vndr
    + sm6150-common:Remove vendor_debugfs_clk
    + sm6150-common: Kill IMS logspam
    + sm6150-common: Clean debug properties for graphics layer
    + sm6150-common: props: Use HintManager for HWUI
    + sm6150-common: Enable config_avoidGfxAccel
    + Alter Partitions to Fit bit larger gapps
    + sm6150-common: Disable blur on app launch
    + sm6150-common: Disable Async MTE on System Server
    + sm6150-common: Switch to SkiaGL
    + sm6150-common: props: Disable Skia tracing by default
    + sm6150-common: Compile HWUI for performance
    + sm6150-common: overlay: Compact cached app heaps in the background
    + sm6150-common: overlay: Allow more cached apps in the background
    + sm6150-common: overlay: Offload WM shell to another thread
    + Enable F2FS Compression
    + Initial User build
  • 13
    BE3pE0l.png

    Code:
    *** Disclaimer
    I am not responsible for any damage you made to your device
    You have been warned

    Features:
    * Encrypted by default
    * Selinux enforcing and Safety net passes by default
    * More info - Click here

    First Time Installation:
    * Backup before you begin
    * Reboot to TWRP-based recovery / Ofox
    * Clean Flash (Via adb sideload / via sd card)
    * Reboot to recovery after switching slot (For flashing gapps).(If needed).
    * Reboot

    Update Installation:
    * Backup before you begin
    * Reboot to TWRP-based recovery
    * Flash ROM update
    * Reboot to recovery after switching slot (For flashing gapps).(If needed).
    * Reboot

    Download:
    Redmi Note 10

    Known issues:
    * 48MP mode doesn't works
    * OTA is not tested.

    NOTE:-
    As of now twrp is not pre included
    Screenshots :- https://t.me/jarn10g/14856


    Sources:
    ROM: https://github.com/crdroidandroid
    Kernel:xiaomi-sdm678/android_kernel_xiaomi_mojito

    Visit official website @ crDroid.net
    Redmi Note 10 CR Support group
    Donate to help me in development
    crDroid Community Telegram
    Donate to help CrDroid team pay server costs
    9
    Highlights & Device Specific Changes:
    Build type: Monthly
    Device: Redmi Note 10 (mojito/sunny)
    Device maintainer: Anush Madathumkara (Anush02198)

    ==== 14 September, 2022 ====
    + Based on New Rebased WCSF Kernel
    + Fixed NFC Spams.
    + Fixed MTP related issues.

    ==== 22 July, 2022 ====
    + Based on New Rebased WCSF Kernel
    + sm6150-common: libinit: Override odm_dlkm and vendor_dlkm props
    + sm6150-common: sepolicy: Address WFD prop denial
    + sm6150-common: Drop atrace HIDL service
    + sm6150-common: Remove TARGET_ENABLE_MEDIADRM_64
    + sm6150-common: set debug.sf.latch_unsignaled to 1
    + Update Blobs from Stock MIUI 13.0.9.0.SKGMIXM release-keys
    + sm6150-common:Fix mi_thermald related sepolicies
    + Fix gc related logspam's
    + Re-implemented F2fsRecessModeEnable
    + Improved R/W performance.
    + Improved overall stability.

    ==== 13 June, 2022 ====
    + Update Blobs from MIUI 13.0.7.0
    + Uses Rebased WCSF Kernel.
    + mojito: overlay: Set fps location on x-axis
    + mojito: overlay: Configure side fps properties
    + mojito: vAB: Move recovery resources to /vendor_boot
    + sm6150-common: sepolicy: Add vendor prefix to camera persist file type
    + sm6150-common: overlay: Enable config_forceMultiResolution
    + sm6150-common: vAB: Move GSI AVB keys to /vendor_boot
    + sm6150-common: Fixup Vulkan deQP permission copy
    + sm6150-common: Fix display animation while AOD on/off screen
    + sm6150-common: overlay: Decouple suspend from screen state
    + sm6150-common: Build power-off charging daemon dependency
    + sm6150-common: editorconfig: Add EditorConfig configuration
    + sm6150-common: configs: Add interaction boosts
    + sm6150-common: configs: Set 1 second timeout for interaction boosts
    + sm6150-common: overlay: Drop display STATE_DOZE
    + sm6150-common: powerhint: Enable F2FS background GC
    + sm6150-common: powerhint: Use generic F2FS path provided by init
    + sm6150-common: sepolicy: Add F2FS sysfs permission

    ==== 26 April, 2022 ====
    + Based on rebased WCS Kernel.
    + sm6150-common: overlay: Disable wallpaper zooming
    + sm6150-common: Update surfaceflinger props
    + sm6150-common: Disable partial FB excl rect
    + sm6150-common: audio: extend buffer size to 256kb for offload playback
    + sm6150-common: Enable support for protected content GPU composition
    + sm6150-common:Remove Display framebuffer flag
    + sm6150-common: props: Fix rank of OMX audio codec components
    + sm6150-common: media: Add swap width and height feature
    + sm6150-common: audio: Remove dynamic attributes from APS config
    + sm6150-common: audio: Add Stereo config channel support to usb surround sound
    + sm6150-common: Enable call recording
    + sm6150-common: use armv8-2a-dotprod
    + sm6150-common: Symlink libvndfwk_detect_jni.qti for CneApp
    + sm6150-common: overlay: Enable haptic text cursor
    + sm6150-common: overlay: Disable proximity usage during doze
    + sm6150-common: overlay: Enable burn-in protection
    + sm6150-common: rootdir: Add recovery label
    + mojito: Inherit vAB makefile from new dir
    + mojito: Inherit launch_with_vendor_ramdisk for vAB
    + mojito: fix deprecated power profile items
    + Removal of ANX camera

    ==== 02 March, 2022 ====
    + Update blobs from MIUI 13.0.5
    + Based on rebased WCS Kernel.
    + Added Thermal Profiles
    + Added Dirac Audio
    + sdm6150-common: Disable triple buffering
    + sm6150-common: Make fastrpc_shell_3 publicly available
    + sm6150-common:Update Some Blobs from LA.UM.9.1.r1-11500.02-SMxxx0.QSSI12.0
    + sm6150-common:Add missing zram writeback props
    + sm6150-common: Use proper dynamic partition size for AB
    + sm6150-common: prop: Checkout with latest miui13 release
    + sm6150-common: audio: Remove FM Tuner from input devices
    + sm6150-common: wifi: Relax WiFi re-association RSSI thresholds
    + sm6150-common: wifi: Disable RX wakelock feature
    + sm6150-common: Update surfaceflinger pin for A12
    + sm6150-common: parts: Increase BootCompletedReceiver priority
    + sm6150-common: Use to vendor C2 manifest entry
    + sm6150-common: overlay: Don't pin renderscript
    + sm6150-common: Build extphonelib libs
    + sm6150-common: sepolicy: Address xiaomi parts denials.
    + sm6150-common: sepolicy: Add mlstrustedsubject attribute to parts.
    + sm6150-common: sepolicy: Label bootanim color props
    + sm6150-common: sepolicy: Label more imei props
    + sm6150-common: sepolicy: Address vendor_dataservice_app denies
    + sm6150-common: sepolicy: Address telephony denies
    + sm6150-common: sepolicy: Allow recovery to access pstore
    + sm6150-common: Don't inherit updatable_apex.mk
    + sm6150-common: cmdline: Disable kpti
    + sm6150-common: Add hardware/qcom-caf/wlan to namespaces and wpa_supplicant
    + sm6150-common: Adding developer GSI keys
    + mojito:Update Touch Improve blobs from LA.UM.9.1.r1-11500.02-SMxxx0.QSSI12.0

    ==== 31 January, 2022 ====
    + Update blobs from MIUI 13
    + Updated WCS Kernel.
    + Fixed few sepolicy denials and wakeup nodes.
    + sm6150-common: prop: Optimise dex flags
    + sm6150-common: prop: Import commonized audio pcm voip
    + sm6150-common: overlay: Update config_safe_media_volume_index
    + sm6150-common: overlay: Drop unused/useless overlays
    + sm6150-common: prop: Set media vol steps to 25
    + sm6150-common: Build media Codec2 modules
    + Moved to Vanilla build

    ==== 14 January, 2022 ====

    + Initial Beta build.
    + Minimal gapps are prebuilt.
    + ANX cam preincluded.
    6
    New Build is UP:-


    Changelogs:-
    ==== 22 January 2023 ====
    + Used latest WCSF
    + Update Blobs from mojito qssi-user 12 SKQ1.210908.001 V13.0.11.0.SKGMIXM release-keys
    + sm6150-common: Switch to legacy sepolicy_vndr
    + sm6150-common:Remove vendor_debugfs_clk
    + sm6150-common: Kill IMS logspam
    + sm6150-common: Clean debug properties for graphics layer
    + sm6150-common: props: Use HintManager for HWUI
    + sm6150-common: Enable config_avoidGfxAccel
    + Alter Partitions to Fit bit larger gapps
    + sm6150-common: Disable blur on app launch
    + sm6150-common: Disable Async MTE on System Server
    + sm6150-common: Switch to SkiaGL
    + sm6150-common: props: Disable Skia tracing by default
    + sm6150-common: Compile HWUI for performance
    + sm6150-common: overlay: Compact cached app heaps in the background
    + sm6150-common: overlay: Allow more cached apps in the background
    + sm6150-common: overlay: Offload WM shell to another thread
    + Enable F2FS Compression
    + Initial User build
    5
    New build is up:-

    Changelogs:-

    ====================
    01-11-2022
    ====================

    * initial CR 9.X release
    4
    New build is up