[ROM][13][OFFICIAL][ENCRYPTION] PixelExperience /PixelExperience Plus for S10 Series [AOSP]

Search This thread

SharkB69y

Senior Member
Aug 2, 2022
90
46
France
That happens only cuple of minutes after you set it up but then it works fine. I installed it today and even safety net works, the instalation took only half an hour when counting in the download of drivers and the rom, first I was scared to do it but I now know it is begginer friendly
I still have a lot of bugs and freezes on pixel experience plus S10+ version...
 

SharkB69y

Senior Member
Aug 2, 2022
90
46
France
Screenshot_20221227-094303_Paramètres.png


The battery utilisation is crazy 😅
And the phone is overheating
 
Last edited:
How can i get to download mode?

I press volume down+ bixby and plugging it into pc but it doesn't boot to download mode when I unplugg the cable it boots system

where can i find the vbmeta.tar for this device

Switch to twrp and install the ROM, you'll have a better experience
where can i find the vbmeta

Ok so the phone can't go to download mode because I tried to install twrp and the first vbmeta disabler they had and it bricked.

And smart switch doesn't support this device
 
Last edited by a moderator:

expressluke

Senior Member
You're supposed to follow the instructions on the twrp thread, you haven't bricked anything.
Twrp thread.



Vbmeta disabled tar
 
OK, but they say that it works only on some firmware

and I reinstalled samsung firmware and now will try to install the evolution x and see if it is any batter :)

Twrp thread.



Vbmeta disabled tar
OK i will try to install it with that guide

Woah it took only 17 minutes to download everything and install. Now i run twrp on the phone with pixel experience. Good job man
 

joaovitordsv

Member
Nov 21, 2014
10
6
Great ROM! I installed using TWRP and have no problems at all, but the system animations on launcher and when i open recents apps is very laggy and buggy. When i restart the phone It come back to normal, but a few minutes later the laggy animations came again. That laggy animation is happening on the bootanimation too.
I'm using as my daily driver ROM, cause that bug on animations doesn't is too bad. Thx for keeping the S10 line alive!

Edit: I think it's important to say, the animations inside the apps is normal, that only happens in the launcher and in the recents apps.
 
  • Like
Reactions: witampanstwa_

Gravarty

Member
Nov 25, 2016
40
7
Bochum
Samsung Galaxy S10
I also flashed the ROM using TWRP (got rid of the remove-encryption check) and so far everything runs just fine. Battery life is good and it also doesn't overheat like someone mentioned. I had some UI lags after the device setup process was done but that also went away after some time. So it seems that PE Recovery is responsible for all these bugs.
 
  • Like
Reactions: Stephanizgo
I also flashed the ROM using TWRP (got rid of the remove-encryption check) and so far everything runs just fine. Battery life is good and it also doesn't overheat like someone mentioned. I had some UI lags after the device setup process was done but that also went away after some time. So it seems that PE Recovery is responsible for all these bugs.
It overheated because I installed it the wrong way
 

stalker14086

Member
Jan 6, 2018
48
5
I installed it using recovery from the topic header in the end I somehow set up a lot of freezes I can't configure protection when choosing a password on the 4th character freezes and throws out of the settings what I did wrong tell me how to set the sequence correctly or maybe you don't need to use recovery from the header to use the usual please tell me
 
I installed it using recovery from the topic header in the end I somehow set up a lot of freezes I can't configure protection when choosing a password on the 4th character freezes and throws out of the settings what I did wrong tell me how to set the sequence correctly or maybe you don't need to use recovery from the header to use the usual please tell me
That's because u used pe recovery. Pe recovery is why it lags so much and overheats. Just reinstall with twrp and u should be fine
 

georgeiulian89

Senior Member
Sep 21, 2010
1,216
738
Pitesti
After 5 years since I've installed the last custom ROM on a phone, I've finally took courage to install your ROM. After 6 hours, everything works perfect, I've flashed with TWRP, and I haven't encountered any bugs so far. Thank you for your work.
 
  • Like
Reactions: witampanstwa_

Kitt3

Member
Jul 13, 2015
13
1
Hello there, can someone how is the sound and if Dolby Atmos is working? (Because now I'm on official PE and it doesn't work)
 

Top Liked Posts

  • There are no posts matching your filters.
  • 1
    I've just installed the rom and gpay and netflix are not working (although banking apps are).

    Also, safetynet fails the CTS profile match.

    Can you please tell me your install configuration?

    (I have installed official PE plus with PE recovery on HVG4 baseband)

    Thanks!
    in new version PE team fixed safetynet problems. We just have to wait a little for update for our devices :)
    1
    Thanks for the update. I will install it now and i report back i a couple of days.
    1
    Battery drain also? I was just getting ready to confirm that this fix worked for me, but I was experiencing just battery drain, couldn't really notice UI stutter.

    So far, it works for me. Didn't try yet a restart, to see if it works after it (maybe you have to disable the service after each boot).

    Since I had to root in order to disable the service, I now have the following question, please, if someone has figured it out:
    What do I have to do/what modules do I need to install to hide root (from banking apps, etc) and pass safetynet? 🙃

    Thanks!
    My safetynet passes with Magisk installed, Universal SafetyNet Fix 2.4.0 Mod 1.1 by Displax, Enforce DenyList enabled and denylist used for Google Wallet, Google Services Framework and Google Play Services.
    1
    I have received the February update OTA.

    So far, after roughly a day of usage I can report the following:
    - no more battery drain
    - safetynet passes out of the box
    - Gpay, Netflix, Banking Apps (Revolut, Ing), all work just fine

    No root/magisk, PE recovery.

    Great job!! 👍
    1
    @expressluke you forgot to change the boot screen resolution for the s10e, you said you were gonna fix it in the Feb update.. 😅
    😂 I did indeed. Thanks for reminding me! Will make a quick hotfix build to correct that!

    Memory of a fish sometimes lol.
  • 15
    NFjZzFl.png

    PixelExperience / PixelExperience Plus for S10 Series

    What is this?
    PixelExperience is an AOSP based ROM, with Google apps included and all Pixel goodies (launcher, wallpapers, icons, fonts, boot animation)

    Our mission is to offer the maximum possible stability and security, along with essential and useful features for the proper functioning of the device

    Based on Android 13



    Whats working?
    Wi-Fi
    RIL
    Mobile data
    GPS
    Camera
    Flashlight
    Camcorder
    Bluetooth
    Fingerprint reader
    Face unlock
    NFC
    Lights
    Sound/vibration


    Known issues
    Nothing yet
    You tell me

    DON'T FLASH GAPPS, THEY'RE ALREADY INCLUDED


    Downloads

    Galaxy S10e (beyond0lte)

    Galaxy S10 (beyond1lte)

    Galaxy S10+ (beyond2lte)

    Galaxy S10 5G (beyondx)


    Encryption on the unofficial ROM will be enabled when PE Recovery is installed and disabled if you have TWRP installed when flashing the ROM. Switching between unencrypted and encrypted states requires a data format.
    Format data if you are coming from any other ROM before flashing this one,


    Download from GitHub Releases

    Galaxy S10e

    Regular: ROM / PE Recovery
    Plus: ROM / PE Recovery

    Galaxy S10

    Regular: ROM / PE Recovery
    Plus: ROM / PE Recovery

    Galaxy S10+

    Regular: ROM / PE Recovery
    Plus: ROM / PE Recovery

    Galaxy S10 5G

    Regular: ROM / PE Recovery
    Plus: ROM / PE Recovery

    Pixel Experience Plus (Build 1)
    S10e
    S10
    S10+
    S10 5G

    Pixel Experience (Build 1)
    S10e
    S10
    S10+
    S10 5G

    This rom can be flashed with any recovery of choice, including TWRP. If you are coming from any other Android 13 rom , format DATA first (i.e Lineage 20, Pixel Extended)




    Telegram Channel for 982x series (ExpressLuke) - for early releases and updates​


    3
    Important Announcement!

    Pixel Experience is going official for Galaxy S10 series!

    3
    Official builds have rolled out and thread updated.
    Clean flash is required to move over to official builds.
    3
    That's because u used pe recovery. Pe recovery is why it lags so much and overheats. Just reinstall with twrp and u should be fine
    Fixed in official builds which will be rolling out soon
    2
    Merry Christmas XDA S10/e/+/5G users

    A new build has been created and released for you all to install.


    Changelog as follows:

    - WireGuard integrated into kernel.
    - Works on latest and older 12 firmwares
    - Vendor partition reverted back to EXT4 from EROFS so now can be edited by the user.
    - F2FS filesystem support restored
    - Dynamic Encryption based on recovery (If TWRP is used, encryption will be disabled on flash)
    - Pixel Experience Recoveries are shipped, for user to flash if they want encryption.
    - OTA support included in all builds


    - Do note if you switch between not using encryption and using it, a data format is REQUIRED.

    As some of you may be using Lineage recovery, installing the build will encrypt your data and you will be forced a data format. Backup your data and do a data format or simply switch to TWRP if you don't want headaches.


    1672005616049.png
    Screenshot_20221224-190359_Settings.png
    Untitled.jpeg