Yes. I used to get distortion while using buletooth device for calls in this particular build. Do you face the same problem or is it just me?
Last edited:
[ROM][13][OFFICIAL][ENCRYPTION] PixelExperience /PixelExperience Plus for S10 Series [AOSP]
- Thread starter expressluke
- Start date
No, I don't have distortion in bluetooth calls.
Maybe the maintainer expressluke has a solution.
You should ask him.
Do you have a solution for this, by any chance, or does saying "Hey google" when the screen is off work for you?
Hello im using the latest build for about a month now. Its very good and stable! Thanks for your hard work. The only problem im experiesing is no microphone on calls via bluetooth (airpods) and low speaker volume on calls. Is there any workaround on ether of those 2 problems? I read about replace the mixer.xml file with the one from stock but im not sure.
Thanks
Thanks
I think ur microphone problem is a matter of configuration. When the airpods are connected, the microphone of the phone should be used, right? So you just have to change the default microphone in Bluetooth.
No, that's definitely not normal, i flashed this on Galaxy S10+ a day ago and at first boot it took about 1 or 2 minutes (i don't remember exactly) then it went into the setup mode, but you say it's spinning for over an hour, i would try to reboot, if that doesn't help, flash the image again
You should probably reflash the ROM, since you say that it's been stuck on boot for over an hour.
Tell me if that helps.
I forgot to mention, that I used LineageOS Recovery to install the ROM and TWRP for formatting my phone, after formatting my phone, i went back to download mode and flashed Lineage Recovery, went to recovery, enabled SIDELOAD and installed Pixel experience with adb sideload.
You said you have a S10, the recovery image for S10 are here: https://download.lineageos.org/beyond1lt
For flashing, Lineage recovery doesn't need vbmeta.tar and before sideload install Pixel experience, it might will say that the signature is invalid or something, but you can ignore that.
BTW: Lineage recovery supporting ENCRYPTION, TWRP doesn't
You said you have a S10, the recovery image for S10 are here: https://download.lineageos.org/beyond1lt
For flashing, Lineage recovery doesn't need vbmeta.tar and before sideload install Pixel experience, it might will say that the signature is invalid or something, but you can ignore that.
BTW: Lineage recovery supporting ENCRYPTION, TWRP doesn't
Hello, this rom is very good, but i use it for week and i found two bug, GPAY DOESNT WORK AND LOW VOLUME ON CALLING SPEAKER
Actually, follow the instructions on the pixel experience website, and flash the rom using pixel experience recovery. It is the safest and surest since you will have no problems and it is the official and recognized way to flash.
Yes when you format in PE recovery select all 3 options, you can reboot back into recovery or just flash the rom without rebooting.
Do you have any UI stutter after the screen is off and phone is charging for a couple hours?
I already said that here, i use LineageOS recovery for Samsung Galaxy S10+: https://download.lineageos.org/beyond2lte
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
1This ROM works fantastic but i have 3 little problems,
1
When i activate hands free mode on a call the volume is extremely low,
2
When i plug a HDMI cable to the phone via an adapter the phone screen appears on the monitor or TV but the frame-rate of the system gets so slow and the system just crashes when i open any app with the HDMI cable plugged
3
Some pixel live wallpapers just don't work, and if you apply one of those wallpapers you will have a black wallpaper and after a couple of minutes the phone will return to the default wallpaper idk if that's a ROM problem but i put it here
As for the fingerprint it works well but i have to slide my finger trough the fingerprint reader to register a new fingerprint, tapping with the finger does not work well and you end up getting a fingerprint timeout but after registering my fingerprint it just works fine in any way, the recognition problem its only on the fingerprint registration screen
if you are not gonna use the phone with HDMI This Custom ROM is freaking Perfect and feels so smooth and great without counting the volume problem on hands free calls
i recommend this rom because i've expected more errors like NFC or Face Recognition not working and other sensor related problems but all the sensors seem to work perfectly
Thanks to the devs and mantainers for the great works with this ROM, Stay safe and have a great day
-
16
PixelExperience / PixelExperience Plus for S10 Series
What is this?
PixelExperience is an AOSP based ROM, with Google apps included and all Pixel goodies (launcher, wallpapers, icons, fonts, boot animation)
Our mission is to offer the maximum possible stability and security, along with essential and useful features for the proper functioning of the device
Based on Android 13
Whats working?
Wi-Fi
RIL
Mobile data
GPS
Camera
Flashlight
Camcorder
Bluetooth
Fingerprint reader
Face unlock
NFC
Lights
Sound/vibration
Known issues
Nothing yet
You tell me
DON'T FLASH GAPPS, THEY'RE ALREADY INCLUDED
Downloads
Galaxy S10e (beyond0lte)
Galaxy S10 (beyond1lte)
Galaxy S10+ (beyond2lte)
Galaxy S10 5G (beyondx)
Encryption on the unofficial ROM will be enabled when PE Recovery is installed and disabled if you have TWRP installed when flashing the ROM. Switching between unencrypted and encrypted states requires a data format.
Format data if you are coming from any other ROM before flashing this one,
Download from GitHub Releases
Galaxy S10e
Regular: ROM / PE Recovery
Plus: ROM / PE Recovery
Galaxy S10
Regular: ROM / PE Recovery
Plus: ROM / PE Recovery
Galaxy S10+
Regular: ROM / PE Recovery
Plus: ROM / PE Recovery
Galaxy S10 5G
Regular: ROM / PE Recovery
Plus: ROM / PE Recovery
Telegram Channel for 982x series (ExpressLuke) - for early releases and updates
- Android OS version: 13
- Security patch level: January 2023
- Build author/Device Maintainer: expressluke
- Device Source code: https://github.com/ExpressLuke/android_kernel_samsung_exynos9820
- Source code: https://github.com/PixelExperience
- ROM Developer: jhenrique09
- Donate to expressluke
4Important Announcement!
Pixel Experience is going official for Galaxy S10 series!
January Update: A new year, a new rebase - PixelExperience Blog
Happy new year for you reading this. As...
blog.pixelexperience.org
43Merry Christmas XDA S10/e/+/5G users
A new build has been created and released for you all to install.
Changelog as follows:
- WireGuard integrated into kernel.
- Works on latest and older 12 firmwares
- Vendor partition reverted back to EXT4 from EROFS so now can be edited by the user.
- F2FS filesystem support restored
- Dynamic Encryption based on recovery (If TWRP is used, encryption will be disabled on flash)
- Pixel Experience Recoveries are shipped, for user to flash if they want encryption.
- OTA support included in all builds
- Do note if you switch between not using encryption and using it, a data format is REQUIRED.
As some of you may be using Lineage recovery, installing the build will encrypt your data and you will be forced a data format. Backup your data and do a data format or simply switch to TWRP if you don't want headaches.
3As promised, regular non Plus version of PE is available to download and install, check the first post for links.
OTA support has been added to the PE (non Plus) build and will be a valid way to update to future. (Next PE Plus build will include this too.)
Note: this can be dirty flashed over PE Plus if you already have that rom installed.
