Development [ROM][13][OFFICIAL] PixelOS [AOSP][STABLE][10/05/2023]
- Thread starter whyredFire
- Start date
-
- Tags
- android 13 lisa pixelos stable
Yes, this will delete everything on your phone, make a backup of stuff you don't want to lose.
Is there any way that we could get a lower brightness for AOD in the next update, as that would play a key role in bringing down battery usage.
Updated firmware to 13.0.8.0 global, then updated PixelOS 12.1 to 13 using recovery in duty method.
The update went without problems. The operating system has loaded. Only magisk installed after all.
Now I have working os and don't wipe data for that.
Many thanks to the developers for such an opportunity to update without losing data. It was hard to set everything up again each time when moving from version to version.
The update went without problems. The operating system has loaded. Only magisk installed after all.
Now I have working os and don't wipe data for that.
Many thanks to the developers for such an opportunity to update without losing data. It was hard to set everything up again each time when moving from version to version.
stableV14.0.2.0.TKOMIXM13.0Global 2023-02-03
I see new version of firmware. Has anyone already tried it with PixelOs 13?
I see new version of firmware. Has anyone already tried it with PixelOs 13?
hi to all,
just installed latest pixelos lisa rom but safetynet check fail (response payload verification failed) and google pay refuse to work because of this i think...
any chance to have future rom updates safetynet compliant?
thanks
just installed latest pixelos lisa rom but safetynet check fail (response payload verification failed) and google pay refuse to work because of this i think...
any chance to have future rom updates safetynet compliant?
thanks
You must've done something wrong because the Rom does pass safetynet fine both with and without root. Also google pay works.
now safetynet is working.. (maybe was a connectivity issue) but google wallet says "Your phone isn't certified or doesn't meet security requirements" and gpay isn't working.
only flashed the rom clearing all data , no root or modding...
just rebooted the phone, safetynet check is failing again on "CTS profile match" waiting two minutes and check passed...
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
5
PixelOS Update! (10/05/2023)
OTA pushed to users on previous build.
Changelogs:
- Switched to pixel libperfmgr for boosting
- Fixed ViLTE (carrier video calling)
- Updated MIUICamera from MIUI V14.0.3.0.TKOMIXM
- Fixed clone mode in MIUICamera
- Updated CarrierConfig from MIUI 14
- Reverted back to stock GPU peak frequency
- Switched back to HWC for brightness control
- Fixed issues with Google recorder
- Merged 'LA.UM.9.16.r1-13000-MANNAR.QSSI12.0' tag in kernel
- Misc improvements and fixes.
- Merged the May security patch
- Switched back to the Pixel launcher (with a potential fix) and Pixel theme picker
- Brought back unlinked ringer streams
- Brought back the option to hide the power menu on the secure lock screen
- Added option for haptic feedback on back gesture
- Added button to upload crash log to Memocho for easier bug reporting
- Minor improvements to SafetyNet/banking app hiding
- Made App Lock more properly accessible and fixed a few issues
- Update pocket mode style to the latest OxygenOS specs
- Re-organized the sound settings
- Introduced the power-off-alarm service
- Updated themed icons
- HWUI improvements
- Reduced log spam
- Other improvements
Note: Dirty flash works for users on previous build.
Read our blog for detailed source changelogs at blog.pixelos.net3After may update I feel more battery usage and sometimes the phone warms. Anyone had noticed this? I mean more battery usage?2Hey, does anyone else feel a bit of a lag sometimes when swiping down from the top or unlocking the phone?2@whyredFire -
I found one major issue. I thought I turned off all available methods of shutting down/rebooting the phone when phone is locked.
But I just found out that the POWER icon sitting right beside the SETTINGS
gear icon in Notification shade is available on all screens including lock screen.
All QS tiles are asking for password to toggle but not the power icon. So, I can reboot / shutdown / reboot to bootloader etc. right from notification shade on lock screen.1
I think there is a problem with pixel launcher we have this issue with pixel os. Perhaps Paranoid ROM is better for heavy usage but I haven't tested it. -
60
PixelOS is an AOSP based ROM, with Google apps included and all Pixel goodies. We aim to provide an experience similar to Google Pixel phones with numerous performance enhancements and a small amount of useful additional features.
Code:/* Your warranty is now void. * * I am not responsible for bricked devices, dead SD cards, * thermonuclear war, or you getting fired because the alarm app failed. Please * do some research if you have any concerns about features included in this ROM * before flashing it! YOU are choosing to make these modifications, and if * you point the finger at me for messing up your device, I will laugh at you. */
READ OUR BLOG
Device Specific Issues:
• So far, everything is working
Downloads
Get the latest PixelOS Build for Xiaomi 11 Lite 5G NE Download
Firmware https://www.xiaomifirmwareupdater.com/firmware/lisa/
Magisk (optional) https://github.com/topjohnwu/Magisk/releases
PixelOS Recovery https://sourceforge.net/projects/pixelos-releases/files/thirteen/lisa/recovery/
Notes
• GApps are included, don't flash separately
• Encryption is enabled by default
• Shipped with QuicksilveR kernel
• MIUICamera shipped by default (everything works).
Flashing Instructions
Clean flash (coming from a MIUI):
• Reboot to bootloader (fastboot)
• Connect phone to PC
•fastboot flash dtbo dtbo.img
•fastboot flash vendor_boot vendor_boot.img
•fastboot flash boot boot.img
•fastboot reboot recovery
• Select Wipe data/factory reset & confirm
• Go back and select Apply update from ADB
•adb sideload PixelOS*.zip
• Flash latest firmware from the link above
•adb sideload fw_lisa*.zip
• After installation complete, Reboot system.
• If you fail to boot to recovery, use boot image from may 2022
Clean flash (coming from another AOSP ROM):
• Follow the same procedure as dirty flashing ones below, and format data in the end
Dirty Flash (updating from previous PixelOS ROM):
• Reboot to recovery
• Apply update from ADB
•adb sideload PixelOS*.zip
•adb sideload fw_lisa*.zip(only if there's a firmware update)
• After installation complete, Reboot system.
Detailed Instructions: https://wiki.lineageos.org/devices/lisa/install
Join our Telegram Group https://t.me/PixelOSChat
We depend on donations to keep our infrastructure running, show your support by donating!
Paypal: https://paypal.me/whyredfire
UPI: [email protected]
Source Code
PixelOS http://github.com/PixelOS-AOSP
Device Tree https://github.com/PixelOS-Devices/device_xiaomi_lisa
Vendor Tree https://gitlab.com/PixelOS-Devices/vendor_xiaomi_lisa
Kernel Tree https://github.com/PixelOS-Devices/kernel_xiaomi_lisa
ROM OS Version: Android 13.
ROM Kernel: Linux 5.4.x
Stable Release Date: 23 January 2022
Latest Release Date: 10 May 202310
After struggIing a little bit I've finally done it. I didn't have any knowledge about any of it before doing this. So I'm not an expert but here is a more detailed guide:
- Assuming you unlocked your bootloader. If you didn't, first you need to unlock it: Bootloader Unlocking Guide
- Download the Latest Android Platform Tools and after exctracting it, move it to the main "C:" folder.
- Download Recovery (boot.img) and move it to the same "Platform Tools" folder that we copied to the "C:"
- Download ROM and don't exctract it or rename it. Also move it to the same folder.
- Download Latest Firmware and also move this to the same folder that we copied to the "C:"
- Download Mi Flash Tool. After downloading it, open the program and select the driver tab and install it.
- Activate the Developer Options in your phone by Settings > About Phone > Tap on MIUI Number 7 times.
- Search "Developer Options" in the settings and open it. There is an "Usb Debugging" option, enable it.
- Connect your phone to the PC. And choose the File Transfer Mode from your phone's notifications.
- Turn off your phone. After that press the Volume Down + Power Button together a few seconds until you see it enter into the Fastboot mode.
- Open the Platform Tools folder that we moved in to the "C:" and type "cmd" into the Windows Explorer's folder direction bar and press Enter.
- Type "adb shell" in to the command prompt that opened. (If it didn't recognise the command, type ".\adb shell" and use ".\" before any command I give after this.)
- Type "fastboot devices". You should see your device. If you couldn't, then check the drivers or install the drivers again from Mi Flash Tool. If you still can't see your device and also can't see it in the Device Manager(Windows) then you probably using a diffrent USB-C cable. Try using the original one. If it still didn't solve the problem, try a diffrent PC or an USB Output.
- Type "fastboot flash boot boot.img". You should see it installing. Wait before it finishes.
- Type "fastboot reboot recovery". You should see your phone entering into the recovery mode. If it didn't, press Power Button few seconds until it shot down. Then press Volume Up + Power Button few seconds until you see it entering into the recovery mode.
- By using Volume Up and Down and Power Buttons you can navigate the recovery menu from your phone. So select "Wipe Data/Factory Reset" and confirm.
- After that go back to the Main Menu and select "Apply update".
- Open the command prompt from your PC again if you closed it and type "adb sideload
PixelOS_lisa-12.1-20220622-1650.zip" (the ROM file should be named this. If your file's name is diffrent, type that instead.)
- It should start installing. If this didn't, then you probably missed some steps from this guide. So please check that if you have the latest Platrfom Tools(adb) and that you download it from the official site. Also don't open it from the PowerShell Window, open it from the "cmd" like I said and make sure that it's in the main "C:" disc. Also try closing and opening again your PC and your phone before proceeding the second time.If it didn't start after all this and said cannot read the file, then you should try this: Large Adress Aware Program .
- Only do this next 2 steps if there is new firmware update or you are flashing this rom from any other rom. If you are just updating your ROM and there is no new firmware update, ignore this next 2 steps.
- After installing sideload reboot to recovery again. Then go into the "Apply Update" again from your phone.
- Open the command prompt from your PC again type "adb sideload fw_lisa_miui_LISAGlobal_V13.0.4.0.SKOMIXM_0508eaacfa_12.0.zip" (the firmware file should be named this. If your file's name is diffrent, type that instead.)
- After installing, navigate trough recovery menu again and select the "Reboot System".
- It's Done!!!8PixelOS Update! (18/06/2022)
Dirty flash works, just sideload or flash from sdcard.
OTA Update pushed to users on previous beta and stable builds.
Download MIUICamera for lisa: https://github.com/PixelOS-Releases...2022-06-11/MiuiCamera-lisa-v1.2-android12.zip
Changelogs:
- Introduced XiaomiParts
- Fixed 5GHz hotspot
- Fixed WiFi Display
- Cleaned up audio properties
- Misc. changes
• Applock is now stable (exposed in security settings)
• Added support for per-app volume
• Added an option to remove the screenshots and screenrecords limits for all applications
• Fixed Media picker SystemUI crash
• Fixed widgets crash on PixelLauncher
• Fixed semi bold font on PixelLauncher
• Switched to material-you animation for double tap to doze gesture
• Added Data Switch QS Tile
• Added delete action for screenshot and screenrecorder notifications
• Fixed colors on DocumentsUI8It's not modded in any sort, the sources used by PE or most other roms are open source and anyone can fork them and modify them according to their requirements, that's exactly what I did. This is not a GSI/ ported rom, it has been properly compiled from the sources.7PixelOS Update! (15/08/2022)
Dirty flash works, just sideload or flash from sdcard.
OTA Update pushed to users on previous beta and stable builds.
Changelogs:
• Reverted back to boot header v3 (try your luck with custom recoveries)
• Reverted most blobs to stock
• Reverted back to aosp color profiles as earlier
• Nuked hi-fi as it doesn't work
• Enabled back CAF input boost
• Switched to QuickSilver Kernel
• Merged August Security Patch
• Introduced Quick unlock
• Added an option to scramble pin layout when unlocking
• Added an option to hide power menu on secure lockscreen
• Allow user configurable fingerprint wake and unlock
• Fixed an issue where vibration intensity would reset on some devices
• Fixed volume panel background color in light mode
• Restored default Pixel font behavior
• Enable strict standby policy
• Rework screen off FOD
• AppLock improvements
• Updated translations
• More miscellaneous changes and fixes
