F.73 is the EU version
This is exactly same as F.18 international one
F.73 is the EU version
stuck on fastbootd reboot cmd, no response after it rebooted itselfBuild 20230127 is ready
WARNING WARNING WARNING
This update requires OOS 13 - F.18 firmware
For firmware update, can use firmware flash tool available on download page - firmware button
Code:1. Download 2. Extract 3. Put phone in fastboot mode (adb reboot fastboot or VOL DOWN + Power from off state) 4. Connect phone to PC 5. Execute Update-firmware.bat (windows) or Update-firmware.sh (Linux - make file executable) 6. If you also want to update modem, choose yes when asked
Changelog: https://crdroid.net/lemonadep/9#changelog
Download: https://crdroid.net/lemonadep/9
No fastboot drivers installed
have these installed
That's not for fastboot
ok sorry, found some drivers that ive deleted cuz adb was too old there
is it right sequence?
While I would generally reply "check opening post"...is it right sequence?
1. Updated firmware
2. Flashed rom
3. flashed boot.img from sourceforge (last)
will there be a gapps included version again?While I would generally reply "check opening post"...
Firmware
Sideload rom.zip
Reboot to recovery
Sideload gapps.zip
No need to install boot.img manually unless you were referring to patched boot.img for root
No
Noticed this happens because screen refresh rate is going from 60 to 120hz every blinkAlways on display blinking every second on lockscreen. Started to blink on last build 20230127, previous builds were good
I think it's dialer issue. Had the same issue when using Google dialer. Using default dialer from CrDroid, I have no issues.Does any one else's screen display size become huge during an ongoing call using Google dialer? Happens on Nameless too, just curious.
Thanks
Works well.
I did clean install according to instructions, factory reset, reboot, sideload rom, reboot, sideload nickgapps coreWorks well.
Probably you did not install gapps correctly after updating.
Whenever you install Cr. or upgrade, you need to boot into recovery and sideload gapps.
Check well which gapps you have installed.I did clean install according to instructions, factory reset, reboot, sideload rom, reboot, sideload nickgapps core
I tried the method, but it did not work. After rebooting to EDL mode (via Magisk), it again showed the orange state boot screen and restarted the phone. The device was shown as "N/A" in the MSM tool app the whole time. Once again, thanks for the help. I will keep an eye out for any future assistance.
downgrade on revision not possible@gwolfu is there any version downgrade guide? Or just flash previous build? Never worked on other phones this way
*** Disclaimer
I am not responsible for any damage you made to your device
You have been warned
fastboot flash dtbo dtbo.img
fastboot flash vendor_boot vendor_boot.img
fastboot flash boot boot.img
adb sideload crDroid.zip
adb sideload crDroid.zip
1. Download
2. Extract
3. Put phone in fastboot mode (adb reboot fastboot or VOL DOWN + Power from off state)
4. Connect phone to PC
5. Execute Update-firmware.bat (windows) or Update-firmware.sh (Linux - make file executable)
6. If you also want to update modem, choose yes when asked