Development [ROM][13][OOS Cam][OP9Pro] crDroid v9.9 [30.09.2023]

[Smedslund]

Can I still use eva/blu_spark kernel on EX01 firmware

Eva works fine with latest crDriod, if you use the latest version of the kernel found via their telegram channel.

 

[marcnesium_]

Hi guys, I´m having problems with my fast charging. When I plug it in (original charger and cable), it starts ramping up the wattage only to "disconnect" the charging and then starting over. This happens every 5 to 10 seconds, so its charging at a snails pace. Is there a way to fix this or is anyone else having this problem?
Thanks in advance, love CrDroid!

 

[mcc2005]

First of all I like crdroid.
But since I installed the latest firmware 13.1.0(EX01) and the Rom from 03.06., the Rom unfortunately no longer runs as well as before. Especially the battery makes rather flabby ... and when I plugged the device to charge and want to unlock it by fingerprint, it get a reboot ... I never had such a thing with this Rom before.
Thanks for the great work

 

[Smedslund]

First of all I like crdroid.
But since I installed the latest firmware 13.1.0(EX01) and the Rom from 03.06., the Rom unfortunately no longer runs as well as before. Especially the battery makes rather flabby ... and when I plugged the device to charge and want to unlock it by fingerprint, it get a reboot ... I never had such a thing with this Rom before.
Thanks for the great work

And people tell me to update my firmware.. This is why I don´t update my firmware.

 

[JordyEGNL]

First of all I like crdroid.
But since I installed the latest firmware 13.1.0(EX01) and the Rom from 03.06., the Rom unfortunately no longer runs as well as before. Especially the battery makes rather flabby ... and when I plugged the device to charge and want to unlock it by fingerprint, it get a reboot ... I never had such a thing with this Rom before.
Thanks for the great work

I have the same eboot issue!

When AOD is on, and brightness is turned down (and refresh rate is lower I think?), and then press on the fingerprint scanner, my phone reboots. Running on crDroidAndroid-13.0-20230603-lemonadep-v9.5 with firmware 13.1.0.500

 

[gwolfu]

I have the same eboot issue!

When AOD is on, and brightness is turned down (and refresh rate is lower I think?), and then press on the fingerprint scanner, my phone reboots. Running on crDroidAndroid-13.0-20230603-lemonadep-v9.5 with firmware 13.1.0.500

logcat

 

[gwolfu]

Great ROM, but esim.me is not working as other AOSP-based ROMs. Is there a way to enable access to SIM1 and SIM2 with OMAPI in this ROM? Log from esim.me application is in the attachment

need logcat if possible

 

[gwolfu]

Build 20230609 is ready

Changelog: https://crdroid.net/lemonadep/9#changelog
Download: https://crdroid.net/lemonadep/9

 

[partcyborg]

And people tell me to update my firmware.. This is why I don´t update my firmware.

Does that mean you are not upgrading your rom either? Or are you running the new builds on older firmware?

 

[frost_icewind]

Has anyone gotten LSPosed running on the latest build? Installed modules aren't showing up.

 

[Smedslund]

Does that mean you are not upgrading your rom either? Or are you running the new builds on older firmware?

I update the rom once a month.

 

[mcc2005]

And people tell me to update my firmware.. This is why I don´t update my firmware.

Since the last update the problems are gone. Everything works again as before. This is currently the best Rom for me.

 

[vs3450]

I have followed the steps as mentioned in the post (including the firmware part). After flashing boot.img i am getting stuck orange state message and post that phone enters into qualcomm crashdump mode. No idea what i am doing wrong. using the latest boot.img and kit files through the link.

 

[JordyEGNL]

I have followed the steps as mentioned in the post (including the firmware part). After flashing boot.img i am getting stuck orange state message and post that phone enters into qualcomm crashdump mode. No idea what i am doing wrong. using the latest boot.img and kit files through the link.

Use the updater script, that worked perfectly for me, it auto updates firmware and flashes recovery

 

[mpraveenin]

It was L3 after installing any OOS 13 based custom rom

 

[vs3450]

Use the updater script, that worked perfectly for me, it auto updates firmware and flashes recovery

There was something wrong with the recovery provided for crdroid. I had managed to flash it using Lineage recovery.
Anyhow, the rom is great. Although i have 2 same issue on Crdroid and nameless both.
1. Battery life isn't that great.
2. Phone's screen becomes unbearably hot while gaming (pubg - smooth+extreme setting). I understand 888 has heating issues, but i haven't fave this in stock oos rom.
Any help in the this regard would be appreciated.

 

[JordyEGNL]

There was something wrong with the recovery provided for crdroid. I had managed to flash it using Lineage recovery.
Anyhow, the rom is great. Although i have 2 same issue on Crdroid and nameless both.
1. Battery life isn't that great.
2. Phone's screen becomes unbearably hot while gaming (pubg - smooth+extreme setting). I understand 888 has heating issues, but i haven't fave this in stock oos rom.
Any help in the this regard would be appreciated.

For me the battery life is way better than OOS 13. My phone can actually survive a whole day without a charger now. Idle drain is minimal, but when using 5G, 120hz and GPS the battery will drain quicker but I think that's normal.

For me the firmware update script worked fine on Windows, did you get any errors?

 

[Smedslund]

There was something wrong with the recovery provided for crdroid. I had managed to flash it using Lineage recovery.
Anyhow, the rom is great. Although i have 2 same issue on Crdroid and nameless both.
1. Battery life isn't that great.
2. Phone's screen becomes unbearably hot while gaming (pubg - smooth+extreme setting). I understand 888 has heating issues, but i haven't fave this in stock oos rom.
Any help in the this regard would be appreciated.

You have to run the .bat file and let your device reboot into FastbootD and complete the firmware flash. To my knowledge it is not possible to run .bat files in any recovery...

 

[JordyEGNL]

You have to run the .dat file and let your device reboot into FastbootD and complete the firmware flash. To my knowledge it is not possible to run .dat files in any recovery...

You have to run the update_firmware.BAT file on your PC and let it finish, your phone will automatically boot into crdroid recovery once done

 

[gwolfu]

Build 20230619 is ready

Changelog: https://crdroid.net/lemonadep/9#changelog
Download: https://crdroid.net/lemonadep/9