[ROM][13][OP7Pro] crDroid v9.1 [03.02.2023]

Search This thread

theslam08

Senior Member
New update give me chills !!!

Last 2 updates make me do lots of backup and restore using PC.
Those updates make the touch screen useless, and had to format all data (inc. internal storage) & flash full ROM againnnn.

Can anyone confirm, does anyone face the issue like that mentioned above 👆
A) You have to be able to read: there are steps required for fully operational functions. Like: flashing the firmware file. If you don't do that step touchscreen doesn't work among many other bugs.

B) Sounds like you will want to just MSM back to OOS and stick with that. Wiping data and restoring is a necessary evil of messing with custom ROMS. Sometimes you can dirty flash but that sometimes causes more problems than the ROM would give if you clean flash.

So if you can't follow (A), I would stick with following (B). No need to talk bad about the ROM (which works mostly fine - just minor bugs here or there) because you can't follow directions and acting like wiping data/restoring is a hassle for you. If it is a hassle, stick with OOS.
 

gwolfu

Recognized Developer
New update give me chills !!!

Last 2 updates make me do lots of backup and restore using PC.
Those updates make the touch screen useless, and had to format all data (inc. internal storage) & flash full ROM againnnn.

Can anyone confirm, does anyone face the issue like that mentioned above 👆
make sure to have recommended firmware on both slots
 

gap30

Senior Member
Aug 10, 2015
324
46
Is it just me with the watching videos on infinity/newpipe issue?

Phone turns off when watching videos apart from that its solid
 

stimularity

Member
Jan 17, 2016
6
8
www.solidscribe.com
Is it just me with the watching videos on infinity/newpipe issue?

Phone turns off when watching videos apart from that its solid
Its not just you. There is some discussion earlier in the thread for a method to "Fix" the video problem. But it didn't work for me. There is still a 10 second pause before each video plays. It was not fixed with recent updates. I'm just living with it. It makes me use my phone for dumb crap less.
 
  • Like
Reactions: gap30

gap30

Senior Member
Aug 10, 2015
324
46
Its not just you. There is some discussion earlier in the thread for a method to "Fix" the video problem. But it didn't work for me. There is still a 10 second pause before each video plays. It was not fixed with recent updates. I'm just living with it. It makes me use my phone for dumb crap less.
Cheers tbh I dont do social media but occasionally if I am bored will watch the odd video like you say I hardly look at my phone now even less
 

theslam08

Senior Member
Its not just you. There is some discussion earlier in the thread for a method to "Fix" the video problem. But it didn't work for me. There is still a 10 second pause before each video plays. It was not fixed with recent updates. I'm just living with it. It makes me use my phone for dumb crap less.

Is it just me with the watching videos on infinity/newpipe issue?

Phone turns off when watching videos apart from that its solid

Could either of you get a log of it? Like start the log, wait for it to stop spewing constant lines then hit play to the video then stop once the video starts? Maybe the log can pinpoint what is happening. Unless someone else already posted one and I just missed it.

But that's the best way to help the dev possibly get it fixed.

Although, not using the phone as much can be a + too lol
 
power menu styles will get removed in next update (already reverted source side) due to some other major incompatibilities
will probably get revisited at a later time in crDroid 9 life cycle

One thing I noticed is that all of the menu styles except Legacy picked up on extra items added to the advanced restart menu, such as Fastboot and Restart SystemUI (I added these on my personal LOS fork, and I temporarily cherry picked the power menu style just to try it out). Legacy, however, did not; heck, pressing "restart" didn't even offer an advanced restart menu, it just restarted the phone. So, yeah, nice idea, but a little buggy and incomplete. 😉
 
  • Like
Reactions: kriszg

Betoon

Member
Apr 17, 2022
13
1
Can't change the volume of calls on loudspeaker (didn't try regular one), my ears are bleeding when talking on WhatsApp or any other app
 
  • Like
Reactions: 1130381752

Toutatis_

Senior Member
Oct 3, 2012
1,393
827
The bug where maximum brightness was triggered when enabling airplane mode quick tile is fixed with today's build

Thank you @gwolfu!
 

1130381752

Member
Mar 9, 2016
31
4
@gwolfu
Sir, i flashed the 2022-12-14 version, but when i launch the Wechat app, it always crash, here are the video and the logcat zip files
 

Attachments

  • logs-2022-12-15-17-04-05.zip
    86.2 KB · Views: 3
  • VID_20221215_214709_074.mp4
    2.9 MB · Views: 0

Top Liked Posts

  • 1
    Just ordered a Google Pixel 7 had my trusty One Plus 7 Pro for 5 years never let me down

    @gwolfu any chance you could buy a Pixel 7 I am really gonna miss this rom
  • 9
    Build 20230113 is ready
    WARNING WARNING WARNING
    !!! This update requires OOS 11.H.32 firmware !!!
    Update can be done via firmware update tool linked in opening post


    Changelog: https://crdroid.net/guacamole/9#changelog
    Download: https://crdroid.net/guacamole/9

    Join the chat on Telegram @ https://t.me/crDroidOP7Pro
    7
    5
    I'm so excited about this new update! Thank you so much gwolfu!!! This update resolved the weird video pause issue.

    I whipped up a tutorial, aimed at beginners, going over each step in some detail. Its mostly for my own memory in the future but if anyone is just jumping into this stuff it may help.

    4
    It took you two hours? For me it took me 15 min, the instructions couldn't get clearer for a seasoned enthusiast, for most maybe an hour at best? What were you having issues with? So in the future we can include the issues in future Roms.

    May I suggest ?

    Step 1 : Backup and prepare
    • Backup your data on your computer
    • Reboot to Bootloadermode
      • Code:
        adb reboot bootloader
      • Or rebooting with the dedicated menu, if it exists.
    Step 2-A - I don't have OxygenOS 12 Firmware
    • Download the firmware on the dedicated download page.
    • Extract it in the platform tools folder, used to send command in adb and fastboot modes
    • If asked, replace the files.
    • Double-click on Update-firmware.batto launch the process
      • It will install the recovery for you
      • Ask you if you want to update the modem as well
      • then you will need to reboot to recovery
        • by using the volumes keys on your phone
        • and select Recovery by pressing the power button
      • In the newly installed Recovery,
        • Navigate with the volumes keys to Advanced
        • then Enter Fastboot
      • When it's done, press Enter in the command prompt and let the script finish.
      • You will be redirected to the main menu of the recovery
    Step 2-B - I have OxygenOS 12 Firmware
    • So, you already have OxygenOS 12 Firmware
    • Flash our boot.img in fastboot
      • You will find it under Recovery on the dedicated download page.
      • To do that, make sure the CrDroid Boot file is in the platform tools folder
      • Code:
        fastboot flash boot nameofthebootfile.img
      • Replace Nameofthebootfile.zip by the name of the version of the ROM .zip you downloaded earlier.
    • then you will need to reboot to recovery
      • by using the volumes keys on your phone
      • and select Recovery by pressing the power button
    Step 3 - Finish the installation
    • In the newly installed recovery, go to Factory Reset
      • You can navigate with the volume keys and confirm with the power key.
    • Confirm the factory reset
    • Back to the main menu by pressing the little arrow at the top.
    • Go to Advanced, and select Reboot recovery
    • Select Apply Update then Apply from ADB
    • You will now use the command prompt to send the CrDroid rom to your phone.
      • To do that, make sure the CrDroid ROM file is in the platform tools folder
    • In the command prompt, type
      • Code:
        adb sideload Nameoftheromfile.zip
      • Replace Nameoftheromfile.zip by the name of the version of the ROM .zip you downloaded earlier.
      • It takes a moment, don't panic and let it work.
      • Once completed, if you don't want to install Google Apps, go back to the main menu and press Reboot system.
    Step 4 - Install Google Apps
    • Once completed, you can install Google Apps, if you want
    • You will find dedicated Google Apps here.
      • Look for the most recent version
      • To understand the differences between packages, you can check here.
    • To do so, go to Advanced, and select Reboot recovery
    • Select Apply Update then Apply from ADB
    • You will now use the command prompt to send the Google Apps .zip file to your phone.
      • To do that, make sure the Google Apps .zip file is in the platform tools folder
    • In the command prompt, type
      • Code:
        adb sideload Nameofthegappsfile.zip
      • Replace Nameofthegappsfile.zip by the name of the version of the ROM .zip you downloaded earlier
      • It takes a moment, don't panic and let it work.
      • Once completed, go back to the main menu and press Reboot system.
    And, it should be okay ! :)

    If someone wants to add, modify, comment, let me know !
  • 22
    BE3pE0l.png

    Code:
    *** Disclaimer
    I am not responsible for any damage you made to your device
    You have been warned


    crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today

    Features:
    https://github.com/crdroidandroid/crdroid_features/blob/13.0/README.mkdn

    Flashing Instructions:
    Pre-installation:
    • OOS 12 H.32 firmware is mandatory (can update via firmware update tool found on download page, firmware button)
    • Download recovery (from download page, recovery button)
    • Optional NikGapps core (download - note that you may also need setup wizard addon if you rely on Google restore)
    • Optional Magisk (boot.img used to patch with Magisk in order to get root, can be found in recovery folder from download page)
    First time installation (clean flash):
    • Backup your data to PC, OTG flash drive
    • Make sure you have OOS 12 firmware installed (if used firmware flash tool from download page, proceed straight to install crDroid.zip)
    • Enter fastboot
    • Flash our boot.img in fastboot
    • Code:
      fastboot flash boot boot.img
    • Boot to recovery (can do from bootloader or with buttons from power off state)
    • Now in recovery go to factory reset and confirm the reset
    • Reboot to recovery
    • Choose apply update and Apply from ADB
    • Now install crDroid zip via sideload
    • Code:
      adb sideload crDroid.zip
    • Go back to main menu and reboot to recovery to install gapps (if you don't want gapps, reboot to system)
    • To install gapps, simply reboot to recovery again and sideload gapps.zip the same way you installed crDroid.zip then reboot to system
    Update installation:
    Via recovery (recommended way):
    • Boot to recovery
    • Choose apply update and Apply from ADB
    • Now install crDroid zip via sideload and reboot
    • Code:
      adb sideload crDroid.zip
    • If you had gapps, reboot to recovery and sideload gapps.zip and reboot
    Via OTA:
    • Go to Settings -> System -> Updater and download latest build
    • Choose install and let it finish
    • If you have Magisk installed, don't click reboot when prompted and go to Magisk and choose install to inactive slot
    • Reboot
    Note: In some cases where incompatible gapps used, may result in boot issues that should get fixed by flashing gapps again in recovery.

    Sources:
    ROM: https://github.com/crdroidandroid
    Kernel: https://github.com/crdroidandroid/android_kernel_oneplus_sm8150

    Download:
    ROM https://crdroid.net/guacamole/9

    Visit official website @ crDroid.net
    crDroid OnePlus 7 Pro Telegram
    crDroid Community Telegram

    If you like my work, consider a donation > My Paypal
    12
    11
    For those not willing to go through the hassle to install OOS 12 on both slots just to update firmware before installing crDroid, I've made a "firmware flash tool" available on download page
    Just boot to bootloader and run Update-firmware.sh (linux) or Update-firmware.bat (windows)
    11
    Build 20221226 is ready
    This build includes lots of goddies, so check changelog :)

    Changelog: https://crdroid.net/guacamole/9#changelog
    Download: https://crdroid.net/guacamole/9

    Join the chat on Telegram @ https://t.me/crDroidOP7Pro
    10