[ROM][13][POLARIS] Pixel Experience [AOSP][2023/01/19]

Search This thread
By:
Advanced…
howpathetic

howpathetic

Senior Member
Nov 14, 2012
378
581
Xiaomi Mi Mix 2S
jjpprrrr said:
The deep sleep time and the signal strength look good to me.

I see that you are using Zepp Life. BBS didn't record too many wakelocks from it, but from my past experience, it may increase idle drain by a noticeable amount. Perhaps try again without it?
Click to expand...
Click to collapse
Without Zepp Life the drain over night for 7 hours was 21%. That's 3% per hour. I do not have BBB log now. It's better than 4% but I wish there was a way how to find out what causing this.
 
howpathetic

howpathetic

Senior Member
Nov 14, 2012
378
581
Xiaomi Mi Mix 2S
howpathetic said:
Without Zepp Life the drain over night for 7 hours was 21%. That's 3% per hour. I do not have BBB log now. It's better than 4% but I wish there was a way how to find out what causing this.
Click to expand...
Click to collapse
@jjpprrrr Well this is interesting. After entering airplane mode before sleep. The drainage is about 5 % after 7:30 hour.

The day before I tried to disable bluetooth and WiFi and it did not help. And the airplane mode disables WiFi, bluetooth and mobile data right? Could it be coming from the mobile data ? Will try next night.
 

Attachments

  • Screenshot_20221218-070523_Nastavení.png
    Screenshot_20221218-070523_Nastavení.png
    67.9 KB · Views: 40
jjpprrrr

jjpprrrr

Senior Member
Nov 27, 2018
1,013
977
jjpprrrr.com
howpathetic said:
@jjpprrrr Well this is interesting. After entering airplane mode before sleep. The drainage is about 5 % after 7:30 hour.

The day before I tried to disable bluetooth and WiFi and it did not help. And the airplane mode disables WiFi, bluetooth and mobile data right? Could it be coming from the mobile data ? Will try next night.
Click to expand...
Click to collapse
It could be anything. Some apps give up on constantly polling for updates if they see that airplane mode is enabled.
 
dRm42

dRm42

Senior Member
Aug 17, 2011
134
89
Xiaomi Mi Mix 2S
Nothing Phone 1
Hi Guys, I've just updated to PE 13 - thanks @jjpprrrr. I've noticed that in PE 13, Pixel Launcher's app drawer was very choppy. Cleared the app cache and it came alright. However, the next day it was choppy again. At the same time it consumed almost 40% of the battery! Clearing cache fixes it every time, but the issue returns after a few hours. Last night I've switched to Nova Launcher and the issue is now gone, so it's definitely something to do with the launcher, not the rom itself. Has anyone experienced this or it's just me? I'd love to switch back to the built-in Pixel Launcher if there's a way. Cheers
 
jjpprrrr

jjpprrrr

Senior Member
Nov 27, 2018
1,013
977
jjpprrrr.com
dRm42 said:
Hi Guys, I've just updated to PE 13 - thanks @jjpprrrr. I've noticed that in PE 13, Pixel Launcher's app drawer was very choppy. Cleared the app cache and it came alright. However, the next day it was choppy again. At the same time it consumed almost 40% of the battery! Clearing cache fixes it every time, but the issue returns after a few hours. Last night I've switched to Nova Launcher and the issue is now gone, so it's definitely something to do with the launcher, not the rom itself. Has anyone experienced this or it's just me? I'd love to switch back to the built-in Pixel Launcher if there's a way. Cheers
Click to expand...
Click to collapse
That's a known issue with the Pixel launcher. It appears randomly across different devices, not just on our polaris.
 
  • Like
Reactions: kjpp and dRm42
dRm42

dRm42

Senior Member
Aug 17, 2011
134
89
Xiaomi Mi Mix 2S
Nothing Phone 1
jjpprrrr said:
That's a known issue with the Pixel launcher. It appears randomly across different devices, not just on our polaris.
Click to expand...
Click to collapse
Ah cool, thanks. I'll just wait it out then.

I've read similar complaints on a couple of forums, but some of them were relatively old entries. Someone mentioned that turning on or off Force GPU Rendering solved it, but that doesn't seem to be in developer options anymore in Android 13.
 
howpathetic

howpathetic

Senior Member
Nov 14, 2012
378
581
Xiaomi Mi Mix 2S
@jjpprrrr So I captured all network access from my device over night (again 40% of battery) I will just put it here now. I did not look at it deeply. But I think that its mainly system packages establishing connections during deep sleep.

Edit: First parse. Number of entrys per application

Code: 
    228 Služby Google Play //Services Google Play
     70 TikTok
     55 Messenger
     34 Google
     32 Chrome
     29 netd
     24 Zprávy // Messages
     20 WhatsApp
     14 Kalendář // Calendar
     13 Tabulky // Spreadsheets
     13 Facebook
     12 Obchod Google Play // Google play store
      8 YouTube
      7 Telefon // Phone
      5 Disk // Google Drive
      4 Můj vlak // Cz app for train schedules
      3 Mapy // Gogole Maps
      2 Tipsport CZ
      2 Gmail
      2 Android
      1 Unknown
      1 App

Number of occurances:

Code: 
    138 mtalk.google.com
     40
     36 www.google.com
     28 play.googleapis.com
     23 edge-mqtt.facebook.com
     19 www.gstatic.com
     16 chat-e2ee-mini.facebook.com
     14 gnpfesdk-pa.googleapis.com
     14 g.whatsapp.net
     13 userlocation.googleapis.com
     12 encrypted-tbn2.gstatic.com
     11 www.googleapis.com
     10 graph.facebook.com
     10 encrypted-tbn1.gstatic.com
      9 web.facebook.com
      9 android-context-data.googleapis.com
      7 api16-normal-c-useast1a.tiktokv.com
      6 telephonyspamprotect-pa.googleapis.com
      6 googleads.g.doubleclick.net
      5 youtubei.googleapis.com
      5 webcast16-normal-c-useast1a.tiktokv.com
      5 log22-normal-useast1a.tiktokv.com
      5 instantmessaging-pa-eu.googleapis.com
      5 frontier-va.tiktokv.com
      5 calendarsync-pa.googleapis.com
      5 android.googleapis.com
      4 region1.app-measurement.com
      4 play-fe.googleapis.com
      4 people-pa.googleapis.com
      4 mon.isnssdk.com
      4 dit.whatsapp.net
      4 connectivitycheck.gstatic.com
      4 app-measurement.com
      4 api16-core-c-useast1a.tiktokv.com
      4 android.clients.google.com
      3 vcs-va.tiktokv.com
      3 tasks-pa.googleapis.com
      3 search16-normal-c-useast1a.tiktokv.com
      3 safebrowsing.googleapis.com
      3 p77-sign-va.tiktokcdn.com
      3 lh5.googleusercontent.com
      3 i.ytimg.com
      3 growth-pa.googleapis.com
      2 xgapromomanager-pa.googleapis.com
      2 webcast22-ws-useast1a.tiktokv.com
      2 webcast16-ws-useast1a.tiktokv.com
      2 tnc16-platform-useast2a.tiktokv.com
      2 time.android.com
      2 ssl.gstatic.com
      2 rtlog22-normal-useast1a.tiktokv.com
      2 notifications-pa.googleapis.com
      2 mssdk16-normal-useast1a.tiktokv.com
      2 mon15-normal-useast1a.tiktokv.com
      2 mon.tiktokv.com
      2 mon-va.tiktokv.com
      2 mobilemaps.googleapis.com
      2 libra16-normal-useast1a.tiktokv.com
      2 ipws.cdis.cz
      2 inbox.google.com
      2 in.appcenter.ms
      2 geller-pa.googleapis.com
      2 docs.google.com
      2 deviceintegritytokens-pa.googleapis.com
      2 cd-ws.circlegate.com
      2 calendarpushsubscription-pa.googleapis.com
      2 c.whatsapp.net
      2 api19-normal-c-useast1a.tiktokv.com
      2 api19-core-c-useast1a.tiktokv.com
      2 alt5-mtalk.google.com
      1 webcast19-normal-c-useast1a.tiktokv.com
      1 search19-normal-c-useast1a.tiktokv.com
      1 pull-w5-sg01.tiktokcdn.com
      1 pull-flv-f77-va01.tiktokcdn.com
      1 pull-f5-va01.tiktokcdn.com
      1 pull-f5-tt02.tiktokcdn.com
      1 pull-f5-gcp01.tiktokcdn.com
      1 pull-a5-tt02-infra.fcdn.us.tiktokv.com
      1 play-lh.googleusercontent.com
      1 Info
      1 34.102.215.99
 

Attachments

  • PCAPdroid_21_pro_08_34_29.txt
    74.5 KB · Views: 11
Last edited:
jjpprrrr

jjpprrrr

Senior Member
Nov 27, 2018
1,013
977
jjpprrrr.com
howpathetic said:
@jjpprrrr So I captured all network access from my device over night (again 40% of battery) I will just put it here now. I did not look at it deeply. But I think that its mainly system packages establishing connections during deep sleep.

Edit: First parse. Number of entrys per application

Code: 
    228 Služby Google Play //Services Google Play
     70 TikTok
     55 Messenger
     34 Google
     32 Chrome
     29 netd
     24 Zprávy // Messages
     20 WhatsApp
     14 Kalendář // Calendar
     13 Tabulky // Spreadsheets
     13 Facebook
     12 Obchod Google Play // Google play store
      8 YouTube
      7 Telefon // Phone
      5 Disk // Google Drive
      4 Můj vlak // Cz app for train schedules
      3 Mapy // Gogole Maps
      2 Tipsport CZ
      2 Gmail
      2 Android
      1 Unknown
      1 App

Number of occurances:

Code: 
    138 mtalk.google.com
     40
     36 www.google.com
     28 play.googleapis.com
     23 edge-mqtt.facebook.com
     19 www.gstatic.com
     16 chat-e2ee-mini.facebook.com
     14 gnpfesdk-pa.googleapis.com
     14 g.whatsapp.net
     13 userlocation.googleapis.com
     12 encrypted-tbn2.gstatic.com
     11 www.googleapis.com
     10 graph.facebook.com
     10 encrypted-tbn1.gstatic.com
      9 web.facebook.com
      9 android-context-data.googleapis.com
      7 api16-normal-c-useast1a.tiktokv.com
      6 telephonyspamprotect-pa.googleapis.com
      6 googleads.g.doubleclick.net
      5 youtubei.googleapis.com
      5 webcast16-normal-c-useast1a.tiktokv.com
      5 log22-normal-useast1a.tiktokv.com
      5 instantmessaging-pa-eu.googleapis.com
      5 frontier-va.tiktokv.com
      5 calendarsync-pa.googleapis.com
      5 android.googleapis.com
      4 region1.app-measurement.com
      4 play-fe.googleapis.com
      4 people-pa.googleapis.com
      4 mon.isnssdk.com
      4 dit.whatsapp.net
      4 connectivitycheck.gstatic.com
      4 app-measurement.com
      4 api16-core-c-useast1a.tiktokv.com
      4 android.clients.google.com
      3 vcs-va.tiktokv.com
      3 tasks-pa.googleapis.com
      3 search16-normal-c-useast1a.tiktokv.com
      3 safebrowsing.googleapis.com
      3 p77-sign-va.tiktokcdn.com
      3 lh5.googleusercontent.com
      3 i.ytimg.com
      3 growth-pa.googleapis.com
      2 xgapromomanager-pa.googleapis.com
      2 webcast22-ws-useast1a.tiktokv.com
      2 webcast16-ws-useast1a.tiktokv.com
      2 tnc16-platform-useast2a.tiktokv.com
      2 time.android.com
      2 ssl.gstatic.com
      2 rtlog22-normal-useast1a.tiktokv.com
      2 notifications-pa.googleapis.com
      2 mssdk16-normal-useast1a.tiktokv.com
      2 mon15-normal-useast1a.tiktokv.com
      2 mon.tiktokv.com
      2 mon-va.tiktokv.com
      2 mobilemaps.googleapis.com
      2 libra16-normal-useast1a.tiktokv.com
      2 ipws.cdis.cz
      2 inbox.google.com
      2 in.appcenter.ms
      2 geller-pa.googleapis.com
      2 docs.google.com
      2 deviceintegritytokens-pa.googleapis.com
      2 cd-ws.circlegate.com
      2 calendarpushsubscription-pa.googleapis.com
      2 c.whatsapp.net
      2 api19-normal-c-useast1a.tiktokv.com
      2 api19-core-c-useast1a.tiktokv.com
      2 alt5-mtalk.google.com
      1 webcast19-normal-c-useast1a.tiktokv.com
      1 search19-normal-c-useast1a.tiktokv.com
      1 pull-w5-sg01.tiktokcdn.com
      1 pull-flv-f77-va01.tiktokcdn.com
      1 pull-f5-va01.tiktokcdn.com
      1 pull-f5-tt02.tiktokcdn.com
      1 pull-f5-gcp01.tiktokcdn.com
      1 pull-a5-tt02-infra.fcdn.us.tiktokv.com
      1 play-lh.googleusercontent.com
      1 Info
      1 34.102.215.99
Click to expand...
Click to collapse
Those numbers are quite small. They shouldn't affect the drain that much.
 
sso1955

sso1955

Senior Member
May 2, 2010
126
17
Could someone tell me why I can't enable the wifi hotspot?
I apologize if this is a known issue and I haven't noticed it.

Merry Christmas to all and happy new year!!!
 

Attachments

  • Screenshot_20221224-090052_Settings.png
    Screenshot_20221224-090052_Settings.png
    116.7 KB · Views: 22
sso1955

sso1955

Senior Member
May 2, 2010
126
17
jjpprrrr said:
  1. Enable USB debugging in developer options
  2. Connect your phone to a computer with platform-tools installed (so that you can use adb)
  3. In a terminal or PowerShell, adb logcat > filename.log
  4. Start doing the thing on your phone that you want to capture logs with
  5. Use ctrl + c to stop the log capture
Click to expand...
Click to collapse
Thank you very mutch for the support...
I followed your instructions.
I hope I did it right
I am attaching the hotspot.log file
 

Attachments

  • hotspot.log
    6.6 MB · Views: 13
S

sthones

Member
Sep 5, 2014
33
5
Hi, does Wifi Calling work for you in the Android 13 Version? I can enable it in the SIM card settings, and the service provider supports it, but it does not work for me, so I wonder what could be wrong.
 
jjpprrrr

jjpprrrr

Senior Member
Nov 27, 2018
1,013
977
jjpprrrr.com
sthones said:
Hi, does Wifi Calling work for you in the Android 13 Version? I can enable it in the SIM card settings, and the service provider supports it, but it does not work for me, so I wonder what could be wrong.
Click to expand...
Click to collapse
Many carriers have a whilelist for VoWiFi. They only provision VoWiFi for devices in the list. VoWiFi just refuses to work for certain carriers on PE no matter what I do.
 
You must log in or register to reply here.

Similar threads

Psy_Man
[ROM][OFFICIAL][9.0.0_r46] Pixel Experience [polaris]
Replies
767
Views
170K
B
Banyma
argraur
[ROM][AOSP][11.0.0_r39]PixelROM Project[polaris][2021/07/15]
Replies
320
Views
92K
-XoRoX-
-XoRoX-
jjpprrrr
[ROM][13.0][POLARIS][OFFICIAL] Evolution X [12/24/2022]
Replies
738
Views
124K
H
Hotrantenhuy
palaych
  • Locked
[ROM][9.0.0_r46] AOSiP Pie [polaris][Unofficial][DISCONTINUED]
Replies
298
Views
56K
palaych
palaych
YazumiWuHung
ROM][8.1.0][POLARIS] Pixel Experience [AOSP][r42][2018/08/24]
Replies
75
Views
27K
FabricioGS
FabricioGS

Top Liked Posts

24 Hours 30 Days All time
  • There are no posts matching your filters.
  • 5
    jjpprrrr
    jjpprrrr
    dRm42 said:
    Just realised that the recorder app is fully functional in PE 13, now with the local transcription feature enabled. In PE 12 this wasn't working because it relied on some hardware component that only Tensor and some Exynos socs had. Personally I don't record audio often, but it's pretty cool nevertheless!
    Click to expand...
    Click to collapse
    It was working fine on PE 12 as well, but you probably needed to uninstall a language model update that was auto installed.
    sthones said:
    Hi,

    today I found Google Pay having stopped working. it's complaining about the system not fulfilling the security requirements/ no original Android version.
    I found the Google Wallet having been updated yesterday (the version shows a release date of Feb 14), so I assume that they introduced some more strict checking.

    anyone found some workaround already?

    Regards
    sthones
    Click to expand...
    Click to collapse
    Please wait for the next update.
    View
    1
    S
    sthones
    zmylna said:
    Hi.
    I have exactly the same problem. Last update installed.
    Did you find solution ?
    Click to expand...
    Click to collapse
    No, not working.
    From what @marioosh666 sent up there, we need to wait for a February security patch update of the Pixel Experience OS.
    View
    1
    E
    ElRocha
    zmylna said:
    Hi.
    I have exactly the same problem. Last update installed.
    Did you find solution ?
    Click to expand...
    Click to collapse
    Install magisk if you haven't and then this module, which is a fork of the original Universal SafetyNet Fix.
    After you reboot, safetynet should pass.
    View
    1
    E
    ElRocha
    zmylna said:
    Do I need root to install magisk?
    Click to expand...
    Click to collapse
    Magisk is the thing that gives you root. You need to have the bootloader unlocked and flash it through the recovery.
    View
    1
    C
    ch0d.curry
    zmylna said:
    Last question.
    Will the Pixel experience recovery allow me to install magisk? Or do I need to install another recovery? TWRP?
    Click to expand...
    Click to collapse

    zmylna, I'm just a random person online, so you don't have to take my advice, but I would recommend holding off on rooting and installing safetynet-fix unless passing SafetyNet is absolutely essential for you at the moment.

    If you root, you will have to update the Magisk module far more often, and you will need to mess with the Magisk Deny List regularly to make sure all of your apps work correctly. There are other ways of detecting root besides failing SafetyNet, so you will be stuck playing cat and mouse. Be patient and trust in the developers of PixelExperience and jjpprrrr for their excellent work. I believe the last time the ROM was failing SafetyNet was in 2021, so it's just a temporary anomaly.
    View
  • 54
    jjpprrrr
    jjpprrrr

    pe_xda_banner.png


    PixelExperience for Xiaomi Mi Mix 2s [polaris]​

    What is this?
    Pixel Experience is an AOSP based ROM, with Google apps included and all Pixel goodies (launcher, wallpapers, icons, fonts, bootanimation)

    Our mission is to offer the maximum possible stability and security, along with essential and useful features for the proper functioning of the device

    Based on Android 13

    Whats working?
    Wifi
    RIL
    Mobile data
    GPS
    Camera
    Flashlight
    Bluetooth
    Fingerprint reader
    NFC
    Lights
    Sound / vibration

    Known issues
    Refer to the changelog for known issues.

    DO NOT FLASH GAPPS, ALREADY INCLUDED
    Download from Pixel Experience website

    Translation
    Help with project translation

    Stay tuned
    Our Telegram channel
    Our blog
    Donate me
    My personal website for build updates and flash guide



    Android OS version: 13.0.0_r23
    Security patch level: January, 2023
    Build author/Device Maintainer: jjpprrrr
    Device and Kernel Source code: https://github.com/PixelExperience-Devices
    Source code: https://github.com/PixelExperience
    ROM Developer: jhenrique09
    View
    15
    jjpprrrr
    jjpprrrr
    Reserved

    2023/01/19
    Changelog: https://jjpprrrr.com/pe/20230119-1051/

    2022/11/22
    Changelog: https://jjpprrrr.com/pe/20221122-0804/

    2022/09/14
    Initial android 13 release.
    Flash guide, changelog, and known issues: https://jjpprrrr.com/pe/20220914-1603/

    2022/08/28
    Changelog: https://jjpprrrr.com/pe/20220828-0030/

    2022/08/16

    PixelExperience 12.1 / 12.1 Plus 20220816-1854 Official Polaris Build

    Linux 4.9.325, qcom early random...
    jjpprrrr.com

    2022/07/13

    PixelExperience 12.1 / 12.1 Plus 20220713-0138 Official Polaris Build

    Linux 4.9.322, massive backports of kernel...
    jjpprrrr.com

    2022/06/28
    Changelog: https://jjpprrrr.com/pe/20220628-1638/

    2022/05/21
    Changelog: https://jjpprrrr.com/pe/20220521-0400/

    2022/04/15
    Changelog: https://jjpprrrr.com/pe/20220415-1325/

    2022/03/31
    Changelog: https://jjpprrrr.com/pe/20220331-1355/

    2022/02/24
    Changelog: https://jjpprrrr.com/pe/20220224-1209/

    2022/01/22
    PE 12 Changelog: https://jjpprrrr.com/pe/20220122-0913/

    2022/01/21
    PE 12 Changelog: https://jjpprrrr.com/pe/20220121-0407/

    2021/12/23
    PE 12 Stable:
    Changelog: https://jjpprrrr.com/pe/20211223-0300/
    PE 11 / 11 Pus:
    Changelog: https://jjpprrrr.com/pep/20211223-0443/

    2021/11/28
    Initial PE 12 BETA official release.
    Changelog: https://jjpprrrr.com/pe/20211128-0611/

    2021/10/20
    Unofficial ALPHA PE 12 builds are available on my website: https://jjpprrrr.com/

    2021/10/11
    PE changelog: https://jjpprrrr.com/pe/20211011-2303/
    PE Plus changelog: https://jjpprrrr.com/pep/20211012-0004/

    2021/09/11
    PE changelog: https://jjpprrrr.com/pe/20210911-0532/
    PE Plus changelog: https://jjpprrrr.com/pep/20210911-0606/

    2021/08/18
    PE changelog: https://jjpprrrr.com/pe/20210818-0017/
    PE Plus changelog: https://jjpprrrr.com/pep/20210818-0016/

    2021/07/20
    PE changelog: https://jjpprrrr.com/pe/20210720-1512/
    PE Plus changelog: https://jjpprrrr.com/pep/20210720-1512/

    2021/07/17
    PE changelog: https://jjpprrrr.com/pe/20210717-2122/
    PE Plus changelog: https://jjpprrrr.com/pep/20210717-2122/

    2021/06/25
    PE changelog: https://jjpprrrr.com/pe/20210625-2017/
    PE Plus changelog: https://jjpprrrr.com/pep/20210625-2017/

    2021/06/19
    PE changelog: https://jjpprrrr.com/pe/20210619-0238/
    PE Plus changelog: https://jjpprrrr.com/pep/20210619-0241/

    2021/05/26
    PE changelog: https://jjpprrrr.com/pe/20210526-0015/
    PE Plus changelog: https://jjpprrrr.com/pep/20210526-0010/

    2021/05/14
    PE changelog: https://jjpprrrr.com/pe/20210514-0431/
    PE Plus changelog: https://jjpprrrr.com/pep/20210514-0428/
    Note: The official PE website is migrating to a new storage provider, and the download may be slow in some regions. Please be patient and try again later if you encounter any download issues.

    2021/04/17
    PE changelog: https://jjpprrrr.com/pe/20210417-0245/
    PE Plus changelog: https://jjpprrrr.com/pep/20210417-0245/

    2021/03/27
    PE changelog: https://jjpprrrr.com/pe/20210327-1844/
    PE Plus changelog: https://jjpprrrr.com/pep/20210327-1844/

    2021/03/10
    PE changelog: https://jjpprrrr.com/pe/20210310-2136/
    PE Plus changelog: https://jjpprrrr.com/pep/20210310-2347/

    2021/02/18
    Changelog: https://jjpprrrr.com/pe/20210218-1327/

    2021/02/07
    Changelog: https://jjpprrrr.com/pe/20210207-0205/

    2021/01/19
    Changelog: my website

    2021/01/07
    Changelog: my website

    2020/12/23
    Changelog: My Website

    2020/11/29
    Changelog: my website

    **Device Specific Changes:**
    - Etude kernel:
    * DO NOT use a third party kernel without proper support for Pixel thermal hal
    * Linux 4.9.246
    * merged CAF R tag LA.UM.9.8.r1-03000-SDM710.0
    * modified DT bindings for Pixel thermal hal
    * enabled zram writeback
    * fixed zram idle and writeback string compare
    * added a killable freezer to kill frozen tasks similar to cgroups v2
    * increased top-app boost
    - Switched to Pixel thermal 2.0
    * also updated thermal engine from Pixel 3 XL android 11 build
    - Updated HDR, SDM, Adreno, Vulkan, Snapdragon CVE, WFD vendor, media, configstore, dpm vendor, DRM, msm_irqbalance, peripheral manager, power-off alarm, time service, TEE, TUI, ESE power manager, CNE, IMS, QMI, and RIL from LA.UM.9.8.r1-02700-SDM710.0
    - Updated WFD system, dpm system, and Widevine blobs from OnePlus8Pro android 11 image
    - Updated the following hal versions
    * Secure Element --> 1.2
    * wfdhdcp --> 1.3
    * health --> 2.1
    * ESE power manager --> 1.1
    * QTI Health implementation --> 2.1
    * IRadio --> 1.5
    * uceservice --> 2.2
    * ims factory --> 1.0
    * qti radio --> 2.4
    * ims rtp service --> 3.0
    * removed qdutils_disp
    * added IVr
    - Switched to CAF R display and media hal
    * screen brightness is now controlled by hwc instead of light HAL, which offers a smooth and accurate brightness adjustment without weird hacks I did on android 10
    * display config 2.0
    * set higher priority to c2 than OMX
    * removed deprecated divx/xvid software codecs
    * cleaned up and merged redundant media codec configs
    - Switched to stable aidl Pixel power hal
    * removed UfsHibern8Enable and clkgate_enable hints in launch and interaction because it may freak out ufshc
    - Switched to AOSP NFC 1.2
    - Switched to AOSP BT stack for now
    - Enabled IORap
    * IORap is a new feature in android 11 that greatly improves app startup time by predicting and prefetching potentially blocking I/O
    - Enabled zram writeback in fstab and job scheduler
    - Added AOSP RCS packages and removed deprecated RCS
    - Bumped audio hal to 6.0
    - Enabled the option to turn on blur in developer settings (defaults to disabled)
    * Note: blur is very expensive on rendering and may incur jank frames
    - Added WifiOverlay
    - Added TetheringOverlay
    - Enabled dex2oat64
    - SELinux enforcing and SafetyNet passes out of the box
    * if you use Magisk, you may need to turn on MagiskHide

    **Feature update highlights:**
    - Initial android 11 release with many Pixel features from Pixel 5.

    **Known issues:**
    - "OK Google" hot word does not work yet


    ====================================
    Old changelogs on android 10 builds:

    2020/11/22
    **Device Specific Changes:**
    - Etude kernel:
    * Linux 4.9.243
    * wireguard 1.0.20201112
    * merged upstream fix on ipv6, vsoc, tee, and thermal from android common kernel
    - Fixed audio stuttering in video playback, when you are also in a voice call using BlueTooth headset
    - Removed unused vndk-sp
    - Added AOSP RCS package and removed deprecated packages
    - Added vendor manifest entry for CACert HAL
    - Added default BTSAR HAL entry
    - Parts: updated API of getting focused stack info
    - Removed some ims entries from init script because they are included in vendor

    **Feature update highlights:**
    - November security patch
    - Translation update
    - Some under the hood fixes and improvements to make your experience even better

    2020/10/15
    **Device Specific Changes:**
    - Etude kernel:
    * Linux 4.9.239
    * fixed a camera memory leak
    * disabled unused wsa881x codecs
    * changed China regulatory domain

    **Feature update highlights:**
    - October security patch (bumped the version string)
    - Translation update

    Note: Incremental update for 20201015 build has been removed from server, due to unknown issue causing error 7 in recovery. The system updater will grab the full package instead. If you had issue flashing incremental update, download the full package and flash it in recovery.

    2020/09/16
    **Device Specific Changes:**
    - Etude kernel:
    * wireguard 1.0.20200908
    - Fixed an issue where the screen has extremely low brightness when woken up by notifications

    **Feature update highlights:**
    - Fixed missing security patch in Settings - Security
    - Fixed potentially duplicated Styles package
    - More translation updates

    2020/09/15
    **Device Specific Changes:**
    - Etude kernel:
    * Linux 4.9.236
    * fpc and goodix fingerprint: use qcom drm notifier instead of the generic one
    * fixed xbl_region reserved memory
    - Reworked screen panel backlight
    * in previous builds
    - adjusting brightness slider in the lower range resulted in uneven brightness transition
    - previous builds did not allow screen to dim to the lowest possible value
    - auto-brightness had slow reaction to ambient light changes
    * patched frameworks/base to use linear brightness slider instead of the log scale one
    * ported gamma-linear conversion to light HAL
    * re-calculated auto brightness curve to fit new light HAL changes
    * reduced light sensor debounce time to stay in-line with MIUI
    * the result:
    - smooth backlight brightness transition when moving brightness slider
    - screen can dim to the lowest possible value the panel allows
    - auto-brightness reacts faster to ambient light changes
    - auto-brightness is no longer jumpy
    - screen dimming caused by no user action has proper transitions

    **Feature update highlights:**
    - September security patch
    - PE Plus: Added pocket lock
    - Improved face unlock
    - Updated translations
    - Under-the-hood fixes and improvements

    2020/08/31
    **Device Specific Changes:**
    - Etude kernel:
    * Linux 4.9.234
    * built with latest Clang 12
    * improved suspend/resume latency
    * some misc fixes on arm64 and mm
    - updated firmware and vendor from MIUI 12 Global Stable V12.0.1.0
    - use qti-telephony-common from polaris dump for injection
    - fixed an issue where mobile data on one SIM may be broken after the other SIM receives a phone call or SMS
    - fixed a few sepolicy issues for sched_boost and sysfs_batteryinfo
    - cleaned up Google specific hints from powerhint

    **Feature update highlights:**
    - Misc fixes

    2020/08/18
    - Etude kernel:
    * Linux 4.9.232
    * built with latest Clang 12
    * wireguard 1.0.20200729
    * disabled LLVM Polly
    * merged some loop device backports from upstream
    * some scheduler changes on idle load
    * upstream on mm, qspinlock, and arm/arm64 specific libs
    - created dummy perfd client so that proprietary perfd blobs can be removed while keeping goodix fingerprint sensor functioning
    - disabled kpi_optimize in audio extension because it tries to call perfd and spams logs when failed
    - re-introduced an updated qti-telephony-common injection to polaris
    * this fixed mms issue on some Korean carriers
    - dropped wifi-ext
    - Updated APNs for Chinese carriers and fixed "HD" capable notification spam
    - Bumped Vulkan feature level to 1
    - Enabled 802.11r Fast BSS Transition and increased max BSS count
    - Enabled unspecialized app process pool

    **Feature update highlights:**
    - August security patch (android-10.0.0_r41)
    - Reworked incremental update so that now it should work no matter which version of recovery you use and whether it supports system-as-root or not.
    - PE Plus: Introduced expanded volume panel

    2020/07/19
    - Etude kernel:
    * cleaned up some previous scheduler changes
    * built with Clang 11’s ThinLTO and more LLVM Polly optimization options. ThinLTO greatly improves build times over full LTO while retaining most of the performance benefits.
    * some upstream for rbtree and arm64 memory assembly
    * reverted back to 100HZ tick rate for better battery life
    * wireguard 1.0.20200712
    * exposed calculated FPS through sysfs. Now you can monitor your frame rates through supported apps (tested on Franco Kernel Manager)
    - Switched to QTI BlueTooth stack

    2020/07/11
    - Etude kernel: Op.10 No.2, "Allegro"
    * Linux 4.9.230 and CAF tag "LA.UM.8.3.r1-08100-sdm845.0"
    * built with Clang LTO(Link Time Optimization) and Polly(Polyhedral Optimization)
    * more scheduler and schedtune upstream
    * enabled CONFIG_HZ_300 and disabled core rotation for better load tracking and EAS task placement
    * fixed an issue on ebbg touchscreen
    - Disabled backpressure propagation due to slight increase in rate of jank frames
    - Dropped qti telephony injection
    * let me know if on some carriers mobile data is still broken after a phone call
    - If you use OrangeFox recovery and have error installing incremental package, please update your OrangeFox to R10.1_3 Stable
    * R10.1_3 Stable offers better compatibility with non system-as-root scripts
    * link: https://files.orangefox.tech/OrangeFox-Stable/polaris/OrangeFox-R10.1_3-Stable-polaris.zip
    * if your partition is not encrypted, make sure to tick "Disable forced encryption" again after updating OrangeFox, because the option will be reset after an OrangeFox update.

    PE: July's security patch
    PE Plus:
    - Brought back color calibration in Livedisplay
    - Per-app network isolation

    2020/06/27
    - Etude kernel:
    * some scheduler change from Pixel 3/XL kernel to improve UI responsiveness and jitter
    * Shadow Call Stack support
    * Wireguard 1.0.20200623
    * built with AOSP Clang 11.0.3 (r383902c)
    - Fully enabled backpressure propagation in SurfaceFlinger
    - Enabled Seamless Transfer
    * now you can switch between different audio output devices by tapping the music note icon on the notification of music apps
    * if you are not sure where it is, check screenshots: https://jjpprrrr.com/pep/20200627-0839/
    - Tweaked powerhint to improve IO latency on UFS
    - If you use OrangeFox recovery and have error installing incremental package, please update your OrangeFox to R10.1_3 Stable
    * R10.1_3 Stable offers better compatibility with non system-as-root scripts
    * link: https://files.orangefox.tech/OrangeFox-Stable/polaris/OrangeFox-R10.1_3-Stable-polaris.zip
    * if your partition is not encrypted, make sure to tick "Disable forced encryption" again after updating OrangeFox, because the option will get reset after an OrangeFox update.

    For PE Plus:
    Known issue: color calibration in Livedisplay is temporarily unavailable due to some changes on ROM source

    2020/06/21
    PE:
    - jjpprrrr's Etude kernel: Op.10 No.1
    * the built-in Etude kernel aims to offer smoother experience and better battery life for users who do not feel like flashing a custom kernel
    * special thanks to palaych for commits of new Xiaomi changes
    * Linux 4.9.228 & LA.UM.8.3.r1-07900-sdm845.0, compiled with AOSP Clang 11.0.1 (r383902)
    * upstreamed lz4 to v1.8.3 and enabled lz4 crypto for zram
    * simple_lmk, sound control, f2fs rapid GC (by arter97), Wireguard 1.0.20200611...
    - Updated Qualcomm Adreno and Vulkan drivers from Pixel 3 XL android 11 beta
    * OpenGL ES 3.2 [email protected] (was @415) and Vulkan 1.1.128
    - Fixed an SELinux denial of vendor_init writing to blkio on boot
    - Increased amount of visible notification icons
    - Increased minimum frequency for expensive rendering
    - Per-app optimization profile under Settings/Battery
    - If you use OrangeFox recovery and have error installing incremental package, please update your OrangeFox to R10.1_3 Stable
    * R10.1_3 Stable offers better compatibility with non system-as-root scripts
    * link: https://files.orangefox.tech/OrangeFox-Stable/polaris/OrangeFox-R10.1_3-Stable-polaris.zip
    * If your partition are not encrypted, make sure to tick "Disable forced encryption" again after updating OrangeFox, because the option will get reset after an OrangeFox update.

    PE Plus:
    - jjpprrrr's Etude kernel: Op.10 No.1
    * the built-in Etude kernel aims to offer smoother experience and better battery life for users who do not feel like flashing a custom kernel
    * special thanks to palaych for commits of new Xiaomi changes
    * Linux 4.9.228 & LA.UM.8.3.r1-07900-sdm845.0, compiled with AOSP Clang 11.0.1 (r383902)
    * upstreamed lz4 to v1.8.3 and enabled lz4 crypto for zram
    * simple_lmk, sound control, f2fs rapid GC (by arter97), Wireguard 1.0.20200611...
    - Updated Qualcomm Adreno and Vulkan drivers from Pixel 3 XL android 11 beta
    * OpenGL ES 3.2 [email protected] (was @415) and Vulkan 1.1.128
    - Fixed an SELinux denial of vendor_init writing to blkio
    - Increased amount of visible notification icons
    - Enabled and improved color profiles in Livedisplay
    * you can now choose between Standard, Reading, and sRGB profile
    - Increased minimum frequency for expensive rendering
    - Per-app optimization profile under Settings/Battery
    - If you use OrangeFox recovery and have error installing incremental package, please update your OrangeFox to R10.1_3 Stable
    * R10.1_3 Stable offers better compatibility with non system-as-root scripts
    * link: https://files.orangefox.tech/OrangeFox-Stable/polaris/OrangeFox-R10.1_3-Stable-polaris.zip
    * If your partition are not encrypted, make sure to tick "Disable forced encryption" again after updating OrangeFox, because the option will get reset after an OrangeFox update.
    - Known issue: color calibration in Livedisplay is temporarily unavailable due to a ROM source side change.

    2020/06/06
    **Device Specific Changes:**
    - Kernel: merged Linux 4.9.226 and LA.UM.8.3.r1-07900-sdm845.0
    - Switched to OSS fingerprint HIDL
    - Updated firmware and blobs from MIUI Global Stable V11.0.5.0 for polaris
    - Fixed APN related issues in May builds and removed CarrierSettings from vendor
    - If you use the latest OrangeFox recovery and see errors flashing incremental package, please
    * run "rm /system" in OrangeFox's terminal (or connect to a computer and run it in adb shell)
    * then install the incremental package
    * you will NOT lose any data. This is simply deleting a symlink for SAR support.

    **Feature update highlights:**
    - June security patch
    - Improved network traffic indicator
    - Fixed vibration when battery saver is enabled
    - Implemented quick QS brightness slider
    - Updated gapps and Pixel Launcher

    2020/05/28
    **Device Specific Changes:**
    - Upstreamed kernel to Linux 4.9.225
    - Shipped CarrierSettings in vendor
    * This should help users who experienced mobile data issue on the first two builds of May (e.g. Vodafone PT)
    - Tweaked power hint a bit to improve battery life
    - If you use the latest OrangeFox recovery and see errors flashing incremental package, please
    * run "rm /system" in OrangeFox's terminal (or connect to a computer and run it in adb shell)
    * then install the incremental package
    * you will NOT lose any data. This is simply deleting a symlink for SAR support.

    **PE side changes**
    - Minor improvements
    - Known issue: network traffic indicator will show up briefly in some scenarios despite disabled in settings.

    2020/05/24
    **Device Specific Changes:**
    - Upstreamed kernel to Linux 4.9.224
    - Brought back CarrierConfig
    - Fixed aux camera (telephoto)
    * now gcam with properly implemented aux support can use telephoto camera (tested on PitbulL gcam)
    - Merged display HAL from CAF LA.UM.8.3.r1-07200-sdm845.0
    * bumped vendor.display.config to 1.9
    * increased max_frame_buffer_acquired_buffers to 3
    * for the buttery smooth experience
    - If you use the latest OrangeFox recovery and see errors flashing incremental package, please
    * run "rm /system" in OrangeFox's terminal (or connect to a computer and run it in adb shell)
    * then install the incremental package
    * you will NOT lose any data. This is simply deleting a symlink for SAR support.
    - Known issue: some carriers may not have APN auto selected

    2020/05/13
    **Device Specific Changes:**
    - Upstreamed kernel to Linux 4.9.223
    - Fixed frequent charging disconnections and screen wakeups when battery is warm (46C)
    - Removed CarrierConfig overlay that is no longer needed
    - Raised background blkio weight
    - Enabled Rich-Communication Services
    - Removed CAF power HAL and imported power-libperfmgr from hardware/google/pixel
    - Imported powerhint.json and powerstats from crosshatch
    - Updated power profile from crosshatch
    - zram: lz4 for compression, size increase as recommended by CAF, and other optimizations
    - Enabled Pixel atrace HAL
    - Switched to 24 bit for primary audio output
    - Removed IO prefetcher, some perf blobs and configs
    - If you use the latest OrangeFox recovery and see errors flashing incremental package, please
    * run "rm /system" in OrangeFox's terminal (or connect to a computer and run it in adb shell)
    * then install the incremental package
    * you will NOT lose any data. This is simply deleting a symlink for SAR support.
    - If your partition is not encrypted, your phone may not boot properly after flashing the update. This is because the zram optimizations changes fstab, so the previous fstab patched by the "disable forced encryption patch" you had on your phone is overwritten. Therefore, you need to flash the patch to disable forced encryption again. If you use OrangeFox, you can also flash the full package, because OrangeFox will automatically patch your phone after flashing full package.

    Pixel Experience 10
    - May security patch
    - Fixed frame drops and random closes on screen recorder
    - Fixed Android Auto flickering
    - Fixed random closes on Settings app

    Pixel Experience 10 Plus
    - May security patch
    - Fixed frame drops and random closes on screen recorder
    - Fixed Android Auto flickering
    - Fixed random closes on Settings app
    - Improved long screenshot
    - Known issue: network traffic indicator may overlap or disappear if too many icons exist in statubar

    2020/04/17
    Device Specific Changes:
    - Upstreamed kernel to Linux 4.9.218
    - If you use the latest OrangeFox recovery and see errors flashing incremental package, please
    * run "rm /system" in OrangeFox's terminal (or connect to a computer and run it in adb shell)
    * then install the incremental package
    * you will NOT lose any data. This is simply deleting a symlink for SAR support.
    - Known issue: Android Auto will cause screen flickering. I am still waiting for PE to merge caf surfaceflinger related commits.

    Pixel Experience 10
    - Fixed abnormal behaviors of elements on lockscreen when enabling "Skip lock screen" in face unlock

    Pixel Experience 10 Plus
    - Fixed abnormal behaviors of elements on lockscreen when enabling "Skip lock screen" in face unlock
    - Long screenshots are now saved to the same folder as normal screenshots

    2020/04/07
    Device Specific Changes:
    - Switched to PE kernel (Linux 4.9.217)
    - Merged firmware and blobs from latest MIUI Global Stable V11.0.4.0
    * Volume adjustment in video calls has been fixed.
    * Firmware is included. No need to flash it manually when installing the ROM.
    - Fixed abnormal screen color and brightness behaviors after HDR video playback
    - If you use the latest OrangeFox recovery and see errors flashing incremental package, please
    * run "rm /system" in OrangeFox's terminal (or connect to a computer and run it in adb shell)
    * then install the incremental package
    * you will NOT lose any data. This is simply deleting a symlink for SAR support.

    Pixel Experience 10
    - April security patch (android-10.0.0_r33)
    - Face unlock
    - Screen recorder with internal audio recording
    - Android Auto is fixed

    Pixel Experience 10 Plus
    - April security patch (android-10.0.0_r33)
    - Face unlock
    - Screen recorder with internal audio recording
    - Long screenshot
    - Android Auto is fixed

    2020/03/13
    Pixel Experience 10
    - Upstreamed kernel to 4.9.214
    - Boosted microphone volume in different use cases
    - March Security Patch (android-10.0.0_r31)
    - Some features from Pixel features drop added, as they were included in the security patch
    - The navbar home button circle (A.K.A OPA Layout) is finally there
    - Added the ability of disabling pocketmode on settings (It’s enabled by default)

    Pixel Experience 10 Plus
    - Initial Release
    - Clean flash is highly recommended.

    2020/02/14 - 0240
    - Merged February security patch
    - Merged blobs from MIUI 20.1.16
    - Firmware 20.1.16 is recommended, although the old firmware 9.11.7 may work for most cases
    - Kernel has merged latest source from Xiaomi
    - If you would like to change kernel, please only use kernels that have new camera drivers
    - Fixed A2DP on new BT stack 2
    - Enabled ViLTE for all Indian carriers
    - Force enabled VoWIFI for any carrier
    - Due to a key signing change on PE server, you may have to download the full package to install in recovery manually.

    2020/01/31 - 1907
    * Fixed double tap to wake on Mix 2s with ebbg screens
    * Reduced LED blinking frequency under low battery, without interfering with notification LED
    Note: PE has been improving their OTA updater recently and some work is still in progress. Clicking "install" in the updater may cause install error for now. You might need to manually flash the incremental package in recovery.
    Update: Updater is only supposed to work with encrypted device. If your phone is not encrypted (OrangeFox disables forced encryption by default), you need permissive SELinux to be able to use the updater.
    Here is a quick way to change SELinux status if you have root:
    Code: 
    abd shell
su
setenforce 0
getenforce
    You should then see "Permissive" being printed in the shell.

    2020/01/25 - 1422
    Fixed audio distortion and out-of-sync when recording videos in Snapchat

    2020/01/25 - 0052
    Fixed Bluetooth call audio on Bluetooth headsets.

    2020/01/22
    Initial official polaris release by jjpprrrr.     Everything is working except for BT calls on some BT headsets.
    View
    13
    jjpprrrr
    jjpprrrr
    Reserved

    - PE recovery is REQUIRED
    * DO NOT use any other recovery
    * Partition scheme has been switched to retrofit dynamic partitioning because polaris is running out of system partition space. No actual re-partition is involved. Instead, the physical system and vendor partition is mapped together to form a logical "super" partition. The size of super partition equals the sum of the physical system and vendor partitions. After that, logical system and vendor partitions are created on top of this super partition. In this way, we are essentially redistributing space between the physical system and vendor partition to accommodate for the increase in size of system libraries and prebuilt apps.
    * The firmware is included with a different keymaster.img from perseus. DO NOT flash your own firmware.
    * To switch to other ROMs, format data in PE recovery first, and then install another recovery. You may need to re-flash the required firmware, if the ROM you are going to flash does not include one.
    - You can dirty flash from the previous PE 13 build. You can dirty flash PE 13 Plus on top of the regular PE 13.
    - You cannot upgrade from android 12 builds. Formatting data is required.

    ==============================
    Old guide for android 12 builds:

    - Formatting data with PE recovery is REQUIRED for clean flash
    * DO NOT use any other recovery
    * The firmware is included with a different keymaster.img from perseus. DO NOT flash your own firmware.
    * Keymaster is bumped to 4.0 for encryption, and cust partition is mounted as /metadata. You WILL NOT be able to boot TWRP on PE 12.1. OrangeFox R11.1_1 or newer can boot but is not capable of decrypting the data partition.
    * To switch to other ROMs, format data in PE recovery first, and then install another recovery. You may need to re-flash the required firmware, if the ROM you are going to flash does not include one.
    - You can dirty flash from my previous PE 12 or 12.1 builds. You can dirty flash the Plus edition on top of PE 12 / 12.1 regular builds.
    - You cannot upgrade from android 11 directly. Formatting data is required.

    PE recovery flash guide
    - Download PE recovery from the official PE website
    - Boot your phone into fastboot mode. You can either
    * hold power + volume down button
    * or `adb reboot bootloader`
    * or use the `Reboot to bootloader` option in TWRP/OrangeFox
    - Connect your phone to a computer
    - Run `fastboot flash recovery pe_recovery_file_name.img` in your cmd/powershell/terminal
    - Hold power + volume up to boot into recovery

    PE 12 flash guide
    - Boot into PE recovery
    - Select `Factory reset" --> "Format data/factory reset`. You phone should say that /data, /cache, and /metadata have been formatted.
    - Go back to main menu and select "Apply update" --> "Apply from ADB"
    - Connect your phone to a computer
    - Run `adb sideload pe_rom_file_name.zip` in your cmd/powershell/terminal and wait until it finishes
    - Reboot to system


    ==============================
    Old guide for android 11 builds:

    Note: The latest TWRP and OrangeFox are able to DECRYPT the /data partition on android11. However, during our testing process, formatting data to bootstrap the ENCRYPTION is still a hit or miss. Some users will get working encryption upon the initial format and boot, but others will have a broken encryption and may need another data format. /data will appear to be encrypted, the recovery will prompt you to enter password, but if you skip/cancel the password prompt, you may see that files are not actually encrypted. This does not happen to everyone using TWRP/OrangeFox, and the cause is still being investigated.
    Therefore, format data with PE recovery is still required for clean flash.
    If you are already on the previous PE 11 build, OTA or dirty flash is fine.


    PE recovery flash guide[Required]:
    - Download PE recovery from the the polaris device page of official PE website
    - Boot your phone into fastboot mode. You can either
    * Hold power + volume down button
    * or `adb reboot bootloader`
    * or use the `Reboot to bootloader` option in TWRP/OrangeFox
    - Connect your phone to a computer
    - Run `fastboot flash recovery pe_recovery_file_name.img` in your cmd/powershell/terminal
    - Hold power + volume up to boot into recovery

    If you have a custom recovery (TWRP/OrangeFox) installed already, you can use that to flash the .img file of PE recovery into the recovery partition.

    PE 11 ROM flash guide[Required]:
    - Boot into PE recovery
    - Select `Factory reset" --> "Format data/factory reset`
    - Go back to main menu and select "Apply update" --> "Apply from ADB"
    - Connect your phone to a computer
    - Run `adb sideload pe_rom_file_name.zip` in your cmd/powershell/terminal and wait until it finishes
    - Reboot to system

    ==============================
    Old guide for android 10 builds:

    Flash guide:
    1. Use latest OrangeFox recovery R11.0 (or newer) or TWRP 3.3.1-1 (or newer)
    2. If you have been using MIUI or any of its variants, you have to format data.
    - you may have to reboot to recovery again after formatting data
    3. Wipe system & data & cache & dalvik cache
    4. Install ROM
    5. Reboot to system

    Note: Official maintainer of PE for polaris has been changed. Clean flash is highly recommended for those coming from the deprecated official build from Oct 2019. I will not offer any help if you've dirty flashed.


    Download: https://download.pixelexperience.org/polaris
    View
    13
    jjpprrrr
    jjpprrrr
    2022/09/14
    Initial android 13 release.
    Flash guide, changelog, and known issues: https://jjpprrrr.com/pe/20220914-1603/
    View
    11
    jjpprrrr
    jjpprrrr
    Update

    2020/03/13
    Pixel Experience 10
    - Upstreamed kernel to 4.9.214
    - Boosted microphone volume in different use cases
    - March Security Patch (android-10.0.0_r31)
    - Some features from Pixel features drop added, as they were included in the security patch
    - The navbar home button circle (A.K.A OPA Layout) is finally there
    - Added the ability of disabling pocketmode on settings (It’s enabled by default)

    Pixel Experience 10 Plus
    - Initial Release
    - Clean flash is highly recommended.

    Download: https://download.pixelexperience.org/polaris
    View

New posts