Development [ROM][13][raven] RisingOS 1.0 Atlantis[AOSP][GAPPS][UNOFFICIAL]

[thelostsoul89]

I had the same issue (with front and all back camera except telephoto). Same thing, reboot fixed it. I was trying to figure out if it was related to rooting with the Canary build. Or maybe the fact that I was on the QPR1 build and when I wiped and flash Stock Nov maybe it didn't wipe properly. I am on the 64-Bit QPR1 right now. I am going to wipe and install Nov with the Android Flash tool and install Rice again. Going to run without root for a few days and see if it happens

Interesting ... I have the Newest version of Android and flashed with the pixel flasher app .. did fill wipe with clean install plus root and it happened for me

 

[w_tapper]

Of course is difficult to compare battery life between users but I'm quite confident that an optimized kernel has some benefit. Most likely you had some issue causing battery drain, a wakelock or other reasons, because the experience with stock kernel has been acceptable for me. I'm now testing kirisakura, did you enable any profile, or just keep the default setting?

flashed through exkm and kept default settings, now I get like 7 hours of screen on time

 

[chewy74]

imma do that tonight then

did you retain root with this method?

 

[thesnappa]

flashed through exkm and kept default settings, now I get like 7 hours of screen on time

Yeah I've never changed from the default kernel settings, and I get similar screen on time. I had no issues with the stock kernel battery life, but it's definitely better with Kiri.

 

[sronweb]

did you retain root with this method?

I have flashed yesterday and I kept root as well.
Read the instructions on Kirisakura thread and it's easy.

 

[w_tapper]

I have flashed yesterday and I kept root as well.
Read the instructions on Kirisakura thread and it's easy.

the instructions didn't work for me but what did work was using patched stock November update boot image

 

[abalam]

Big compliment to the maintainer of this rom. Everything works fine. I flashed it yesterday so can't comment on battery usage yet Safetynet passes fine and all my apps work.

 

[w_tapper]

Big compliment to the maintainer of this rom. Everything works fine. I flashed it yesterday so can't comment on battery usage yet Safetynet passes fine and all my apps work.

try installing kirisakura kernel alongside this rom, makes the 6 pro into a beast of a phone

 

[phaino00]

try installing kirisakura kernel alongside this rom, makes the 6 pro into a beast of a phone

Have you tried Radioactive kernel or just Kirisakura kernel?

 

[w_tapper]

Have you tried Radioactive kernel or just Kirisakura kernel?

only kirisakura

 

[abalam]

I can do that, but then I have to root the device again and I don't want that. Anyway thanks for the tip and if I did I would go for RA kernel

 

[HerrBonecrusher]

I tried installing Kirisakura, i was rooted, installed kernel flasher and flashed the zip. After installing i lost root, as some other people mentioned here, then i tried the method of using the stock november boot img, that caused a bootloop. I managed to fix it by installing the boot.img from rice again. 1h lost and no custom kernel can someone tell me what i did wrong here?

thanks and kind regards

 

[turkertatar]

Anyone can help me i have this issue o cant flash rom

(bootloader) image size (1025724416) biffer than partition size (89115443
FAILED (remote: failed to flash partition (system_a))
İ have already Paranoid Android

 

[sronweb]

I tried installing Kirisakura, i was rooted, installed kernel flasher and flashed the zip. After installing i lost root, as some other people mentioned here, then i tried the method of using the stock november boot img, that caused a bootloop. I managed to fix it by installing the boot.img from rice again. 1h lost and no custom kernel can someone tell me what i did wrong here?

thanks and kind regards

I followed the instructions described on kirisakura first post:

Requirements
- unlocked Bootloader
- USB-Debugging in developer options enabled
- latest adb and fastboot binaries
- working adb and fastboot environment so you can flash back to stock in case something goes wrong
- working magisk environment (a device rooted with latest magisk stable in case you want to be absolutely safe)
- IMPORTANT: Unrelated to the kernel, but update both slots of your phone to A13! (take a look here)
How to flash the Kernel:
1a. Make sure you tick all the requirements above
1. Download the correct kernel.zip depending on your device (Pixel 6 = oriole || Pixel 6 Pro = raven)
2. Flash the correct kernel.zip via EXKM, FKM or kernel flasher. Root will be preserved. The AK3 magisk helper module will be automatically installed during flashing the kernel.zip and be present on next reboot.
Do not remove or disable the AK3 Magisk Helper Module otherwise the device will bootloop.
3. Reboot and profit.

 

[HerrBonecrusher]

I followed the instructions described on kirisakura first post:

Requirements
- unlocked Bootloader
- USB-Debugging in developer options enabled
- latest adb and fastboot binaries
- working adb and fastboot environment so you can flash back to stock in case something goes wrong
- working magisk environment (a device rooted with latest magisk stable in case you want to be absolutely safe)
- IMPORTANT: Unrelated to the kernel, but update both slots of your phone to A13! (take a look here)
How to flash the Kernel:
1a. Make sure you tick all the requirements above
1. Download the correct kernel.zip depending on your device (Pixel 6 = oriole || Pixel 6 Pro = raven)
2. Flash the correct kernel.zip via EXKM, FKM or kernel flasher. Root will be preserved. The AK3 magisk helper module will be automatically installed during flashing the kernel.zip and be present on next reboot.
Do not remove or disable the AK3 Magisk Helper Module otherwise the device will bootloop.
3. Reboot and profit.

That's exactly what I did, at first i was a bit cautious when the topic started here and waited. After being reassured that i just needed to follow these steps to successfully get it working, i stared the installation.. no luck for me so far, even after the second attempt. I won't be messing with the Nov boot.img anymore.. thanks anyways

 

[phaino00]

I tried installing Kirisakura, i was rooted, installed kernel flasher and flashed the zip. After installing i lost root, as some other people mentioned here, then i tried the method of using the stock november boot img, that caused a bootloop. I managed to fix it by installing the boot.img from rice again. 1h lost and no custom kernel can someone tell me what i did wrong here?

thanks and kind regards

You need to flash the magisk patched Nov stock boot image when you root Rice, not magisk patched Rice boot image. Then you can flash a custom kernel and retain root.

 

[chewy74]

You need to flash the magisk patched Nov stock boot image when you root Rice, not magisk patched Rice boot image. Then you can flash a custom kernel and retain root.

I can confirm this worked. Pull the boot.img from the stock Google rom and patch it with magisk. Then flash it to ricedroid (fastboot flash boot boot.img). Then Install FKM or exkm app and flash the custom_kernel.zip and root should be maintained.

 

[w_tapper]

I tried installing Kirisakura, i was rooted, installed kernel flasher and flashed the zip. After installing i lost root, as some other people mentioned here, then i tried the method of using the stock november boot img, that caused a bootloop. I managed to fix it by installing the boot.img from rice again. 1h lost and no custom kernel can someone tell me what i did wrong here?

thanks and kind regards

did you make sure that you didn't accidentally download the ota? I just took it from the full update and it seemed to work fine

 

[Bourjois]

Quick potential bug post: The search function in settings doesn't work for me (Raven AOSP).

 

[w_tapper]

Quick potential bug post: The search function in settings doesn't work for me (Raven AOSP).

my raven pixel is ok