[ROM][13][UNOFFICIAL][beyond/0/1/2/x] crDroid 9.1[January 14 2023][DynamicEncryption][OTA]

Search This thread

FreeRunner2017

Senior Member
Aug 16, 2017
229
112
Canada
BE3pE0l.png

Code:
*** Disclaimer
I am not responsible for any damage you made to your device
You have been warned


crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today


Features:
https://github.com/crdroidandroid/crdroid_features/blob/13.0/README.mkdn

Flashing Instructions:

Pre-installation:
Note:
This ROM now supports firmware HVJ5+ firmware just update to the latest with odin.

First time installation:

  • Download the respective rom for your device (beyond0lte = s10e | beyond1lte = s10 | beyond2lte = s10+ | beyondx = s10 5g)
  • Format data (clears internal storage), wipe system, cache, dalvik/art cache
  • Copy and install the rom zip
  • Reboot device and enjoy.

Update installation:
  • Go to updates in settings and check for updates and install latest that's it!
Important Notice
Encryption on the ROM will be enabled when Lineage recovery is installed and disabled if you have TWRP installed when flashing the ROM. Switching between unencrypted and encrypted states requires a data format. Format data if you are coming from any other ROM before flashing this one.





Android Version : 13
Security patch level: January 2022
Build author/Device Maintainer: FreeRunner2017
Rom Sources: https://github.com/crdroidandroid
Kernel: https://github.com/SealsPlayground/android_kernel_samsung_exynos9820
Device Trees: https://github.com/SealsPlayground

Credits:
Ivan_meler for device trees and kernel.
crdroid for sources
anyone else involved

Join us on our telegram group @expressluke9820 to report issues or just say hi!

Download:
ROM for beyond0lte
ROM for beyond1lte
ROM for beyond2lte
ROM for beyondx

Updates:

14/01/23
changelog
- Add OTA support
- Synced CrDroid sources

11/01/2023
changelog
- Update crDroid version to 9.1
- January security patch
- Minor fixes
- Synced crDroid sources


06/01/2023
changelog:
- Synced CrDroid sources
- Minor fixes

24/12/2022
changelog:
- WireGuard integrated into kernel.
- HVJ* and HVK* firmwares will now be supported for install.
- Vendor partition reverted back to EXT4 from EROFS.
- Dynamic Encryption based on recovery.
- F2FS filesystem support restored.
-Synced CrDroid sources

12/16/22
changelog:
-merged december update android-13.0.0_r16
-synced crDroid sources
-many improvements

11/30/22
changelog:
-fixed some random reboots
-integrated gapps (no need to flash anymore)

Whats working?
Wi-Fi
RIL
Mobile data
GPS
Camera
Flashlight
Camcorder
Bluetooth
Fingerprint reader
Face unlock
NFC
Lights
Sound/vibration
etc.....

Known issues:
Just volte
you tell me


Visit official website @ crDroid.net
Device Telegram
crDroid Community Telegram
crDroid Updates Channel
Donate to help our team pay server costs
 
Last edited:

J4son82

Member
Jun 2, 2021
39
38
MUC
It does not depend on your ROM. FDE (Full Disk Encryption) was removed in Android 13 and TWRP does not support FBE (File Based Encryption).

The only ways you can deal with it are:

a) The insecure way....using the ROM without encryption
b) Use a proper Recovery (LineageOS Recovery)
c) Use it with TWRP and deal with it if it breaks encryption and you loose your personal data
 

JasonXVPrime

Member
Aug 20, 2016
48
42
23
South Africa
BE3pE0l.png

Code:
*** Disclaimer
I am not responsible for any damage you made to your device
You have been warned


crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today


Features:
https://github.com/crdroidandroid/crdroid_features/blob/13.0/README.mkdn

Flashing Instructions:

Pre-installation:

First time installation:

  • Download the respective rom for your device (beyond0lte = s10e | beyond1lte = s10 | beyond2lte = s10+ | beyondx = s10 5g)
  • Format data (clears internal storage), wipe system, cache, dalvik/art cache
  • Copy and install the rom zip
  • Install Gapps (optional)
  • Reboot device and enjoy.

Update installation:
  • Download the respective rom for your device (beyond0lte = s10e | beyond1lte = s10 | beyond2lte = s10+ | beyondx = s10 5g)
  • Copy and install the updated rom zip
  • Optionally wipe cache and dalvik cache
  • Reboot device and enjoy the new update.


Sources:
ROM: https://github.com/crdroidandroid
Kernel: https://github.com/LineageOS/android_kernel_samsung_exynos9820

Download:
ROM for beyond0lte
ROM for beyond1lte
ROM for beyond2lte

ROM for beyondx

Download from google drive

Known issues:
The usual.
VoLTE and VoWiFi (these will never work due to samsung proprietary implementation)


Visit official website @ crDroid.net
Device Telegram
crDroid Community Telegram
crDroid Updates Channel
Donate to help our team pay server costs
Literally my phone broke yesterday, was trying the PixelExtended13 rom and was great, but started getting random massive battery drain from Mobile Standby, was using CR-Droid before things broke, and am glad that this came out today. Talk about perfect timing, just praying I don't have the same battery drain issue because CRDroid is the best.

THANK YOU SO MUCH!!!
 

FreeRunner2017

Senior Member
Aug 16, 2017
229
112
Canada
Literally my phone broke yesterday, was trying the PixelExtended13 rom and was great, but started getting random massive battery drain from Mobile Standby, was using CR-Droid before things broke, and am glad that this came out today. Talk about perfect timing, just praying I don't have the same battery drain issue because CRDroid is the best.

THANK YOU SO MUCH!!!
Thanks glad you like it, will be updated as regularly as possible.
 

JasonXVPrime

Member
Aug 20, 2016
48
42
23
South Africa
This ROM is super stable. Been driving it for most the day now, and it runs buttery smooth with great battery life. As well as there being way more settings than the android 12 version of crdroid, plus face unlock and just a ton of other features built in. You could get all these features with third party apps, but the fact that it's all built in and just works is the best part. Will update if there are any changes, but I would rate this as daily driver material
 

ZmisiS

Senior Member
Dec 23, 2011
3,063
710
59
Livno
Is the interface as on Android 13 of Pixel Phone?

I don't like TWRP. Can it be installed with someone else Recovery, such as Lineage OS Recovery?

My phone is Samsung Galaxy S10 (SM-G973F), Android 12, last firmware is HVJ5.
 

Linux4

Recognized Developer
Thanks for keeping crdroid going on these devices. Looking forward to trying this out on my s10e, but just want to check if it has the high touch sensitivity option as it hasn't always been on early crdroid builds in the past?

Known issues:
Encryption not working

Is the interface as on Android 13 of Pixel Phone?

I don't like TWRP. Can it be installed with someone else Recovery, such as Lineage OS Recovery?

My phone is Samsung Galaxy S10 (SM-G973F), Android 12, last firmware is HVJ5.

Note while this is built entirely using my work only, I do not provide any support for it and recommend to instead wait for a proper build @Jubscleisson will soon provide.
 

Top Liked Posts

  • There are no posts matching your filters.
  • 5
    NOTICE: The following wall of text lists the steps to unbrick / update your galaxy S10 (SM-G973F) phone. If you have another model, this will probably not work for you.

    FreeRunner2017, the creator of this rom, was kind enough to guide me step by step with most of this procedure, so now I´m leaving this on this thread to help out the rest of you!

    I am assuming you have a bricked phone ( no boot or bootloop ). If your phone is not bricked just skip to Step 3.

    Let´s do this...


    No matter what you do to your galaxy S10 (SM-G973F) phone, if it ends up bricked, remember to start the phone in download ( bootloader mode ) in the following way:

    Phone must be powered off

    Press Vol down + bixby at the same time and then plug in a USB-C cable connected to a Windows PC which has the latest samsung USB drivers installed.

    You will be greeted by the light blue samsung download mode screen. If you have Odin opened up on your PC, you will notice that odin will report:

    <ID:0/003> Added!!

    If you don´t know what Odin is, then you need to google Odin for samsung, brush up on what it is, download it and then keep going with this wall of text.

    1. Find the stock samsung android files on the internet which are appropriate to your model, country and carrier. Google search:

    galaxy s10 SM-G973F android 12 stock rom

    I ended up finding mine at:


    It will take you some time to find the apropriate stock rom download link if you choose to use this link. There are thousands of stock roms on that website. If you are patient, you will find the right one for your phone. They are organized by country. you need to find the right carrier for the country as well.

    Once you find the right one, download it to your computer.

    2. Use odin to completely flash the stock samsung android appropriate for your phone. If the first one you download doesn´t work. Don´t despair. Get an older version or get a newer version and try again.

    Unzip the file you downloaded and load the unzipped files to their corresponding section:

    BL
    AP
    CP
    CSC ( use the CSC_OWA_.... file in this section instead of the HOME_CSC_OWA file since you most likely already bricked your phone )

    Press start in odin and wait for about 5 minutes for it to be done.

    If the process takes longer than 5 minutes and odin seems to be stuck on one file, check the bootloader screen on the phone for red text lines. If you find some line which reads something like:

    rev. check fail device: 16 binary:9 (DTB)

    it means you downloaded a wrong version of android for your current situation.

    the device parameter displays the currently installed firmware and the binary parameter displays the version you are trying to install.

    Search the internet again, download a newer/older version and try again.


    3. Once you successfully flashed the samsung stock rom, rebooted and are at the android start screen, try to skip most of the options the phone wants you to configure so that you end up with a semi working phone.

    Re-enable USB debugging, reauthorize your phone on your computer, power off the phone.

    This model of S10 has an SD card slot. Transfer the following files to an SD card and install the card on the phone. You don´t have to use a brand new card. You can use the card which you were using previously with your phone. TWRP won´t touch it.

    I will attach some files to this post and links to other files since some of them are not linked to the Author´s original post. These files will work for the galaxy S10 (SM-G973F) AKA beyond1lte. You will probably mess your phone even further if you use these files with another model

    Copy the following files to the root of the SD card or create a new folder and copy the files to it. Just remember the name you gave to the folder. Insert the SD card to the phone :

    vbmeta.tar ( attached to this post. provided by author )

    twrp-3.7.0_9-1-beyond1lte.img.tar ( twrp recovery ) Link to download from Author´s post

    crDroidAndroid-13.0-xxxxxxxx.zip (crdroid rom) Link to download from Author´s post

    NikGapps (google apps) Get the full version if you want to be able to restore from your google backup during initial setup. LINK to download provided by author

    app-release.apk (magisk delta) Link to download from Author´s post

    safetynetfix-x.x.x-zygisk-mod.zip ( magisk module for passing safetynet checks. The file is attached to this post. provided by author. )

    LSPosed-v1.8.5-6656-zygisk-release.zip ( magisk module for passing safetynet checks. The file is attached to this post. provided by author. )

    REMEMBER TO re-enable USB debugging, reauthorize your phone on your computer, power off the phone.

    4. Restart the phone in download ( bootloader ) mode. Once you´re back at the light blue screen, we are now ready to begin installing CRdroid V9.

    5. Open odin, make sure you get a:

    <ID:0/003> Added!!

    6. Load the TWRP.tar file in the AP tab.

    Load the vbmeta.tar file in the CP tab.

    7. Before you press start on Odin, grab your phone and be ready to press:

    vol up + bixby + power

    as soon as you click start on odin.

    this button sequence will force the phone to boot straight into TWRP recovery after flashing and before odin sends the command to reboot the phone.

    8. When twrp recovery loads, the first thing you must do is tap on wipe - tap Format Data - swipe to factory reset.

    VERY IMPORTANT: Once data is formatted, tap the back button until you get to the main menu. Tap reboot, then tap recovery in order to boot back into twrp recovery again.

    9. Then go to the install menu and and load from the SD card:

    crDroidAndroid-13.0-xxxxxxxx.zip (crdroid rom)

    NikGapps-stock-arm64-13-20220827-signed.zip (google apps)

    app-release.apk (magisk delta)

    Go ahead and flash.

    The install will take a couple of minutes. Once it´s done, wipe cache and reboot to system.

    CrDroid will boot for the first time and it will ask you to set up the phone.

    10. Once the phone is set up, go to the app drawer, select the files app, navigate to the SD card and tap on the:

    app-release.apk (magisk delta)

    file you copied to the SD card in step 3. Yes, you installed this during the twrp flash, but you need to do it again.

    Magisk will install and you will have to reboot.

    11. OPTIONAL. If safety net is important to you, open magisk, tap the modules icon on the bottom right. Tap the:

    Install from storage icon and install from the sd card:

    safetynetfix-x.x.x-zygisk-mod.zip

    reboot.

    go back to the same modules icon in magisk and install:

    LSPosed-v1.8.5-6656-zygisk-release.zip

    reboot.

    Go back to magisk and on the front screen tap on the gear icon on the top right.

    On that screen, set everything as the following screen shots:

    magisk_hide_1.jpg


    magisk_hide_2.jpg


    magisk_hide_3.jpg


    12. Just to make sure you have done everything correctly, got to the play store and install the app:

    SafetyNet test

    If you pass the test, you are ready to rock your new CrDroid V9 Android 13 phone.

    13. If you like to use Gcam as your phone camera. I found one that works well with the S10 (SM-G973F) and this ROM:


    get this one:

    MGC_8.1.101_A9_GV2b_snap.apk

    Enjoy!

    Shout out to FreeRunner ( the author of this ROM ) for guiding me step by step to sort out my lack of knowledge without expecting anything in return. He is one cool dude.

    P.S. Please don´t spam me if this wall of text didn´t work for you. I am not an android expert. I just told you everything I know. :) LOL...
    4
    New builds are up!

    06/01/2023
    changelog:
    - Synced CrDroid sources
    - Minor fixes
    2
    stay tuned for crdroid updated guys.....
    2
    Crdroid builds coming soon guys...
    2
    New builds are up!

    06/01/2023
    changelog:
    - Synced CrDroid sources
    - Minor fixes
    Thanks so much! Appreciate the frequent updates and care for the project. Best rom I've ever used
  • 14
    BE3pE0l.png

    Code:
    *** Disclaimer
    I am not responsible for any damage you made to your device
    You have been warned


    crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today


    Features:
    https://github.com/crdroidandroid/crdroid_features/blob/13.0/README.mkdn

    Flashing Instructions:

    Pre-installation:
    Note:
    This ROM now supports firmware HVJ5+ firmware just update to the latest with odin.

    First time installation:

    • Download the respective rom for your device (beyond0lte = s10e | beyond1lte = s10 | beyond2lte = s10+ | beyondx = s10 5g)
    • Format data (clears internal storage), wipe system, cache, dalvik/art cache
    • Copy and install the rom zip
    • Reboot device and enjoy.

    Update installation:
    • Go to updates in settings and check for updates and install latest that's it!
    Important Notice
    Encryption on the ROM will be enabled when Lineage recovery is installed and disabled if you have TWRP installed when flashing the ROM. Switching between unencrypted and encrypted states requires a data format. Format data if you are coming from any other ROM before flashing this one.





    Android Version : 13
    Security patch level: January 2022
    Build author/Device Maintainer: FreeRunner2017
    Rom Sources: https://github.com/crdroidandroid
    Kernel: https://github.com/SealsPlayground/android_kernel_samsung_exynos9820
    Device Trees: https://github.com/SealsPlayground

    Credits:
    Ivan_meler for device trees and kernel.
    crdroid for sources
    anyone else involved

    Join us on our telegram group @expressluke9820 to report issues or just say hi!

    Download:
    ROM for beyond0lte
    ROM for beyond1lte
    ROM for beyond2lte
    ROM for beyondx

    Updates:

    14/01/23
    changelog
    - Add OTA support
    - Synced CrDroid sources

    11/01/2023
    changelog
    - Update crDroid version to 9.1
    - January security patch
    - Minor fixes
    - Synced crDroid sources


    06/01/2023
    changelog:
    - Synced CrDroid sources
    - Minor fixes

    24/12/2022
    changelog:
    - WireGuard integrated into kernel.
    - HVJ* and HVK* firmwares will now be supported for install.
    - Vendor partition reverted back to EXT4 from EROFS.
    - Dynamic Encryption based on recovery.
    - F2FS filesystem support restored.
    -Synced CrDroid sources

    12/16/22
    changelog:
    -merged december update android-13.0.0_r16
    -synced crDroid sources
    -many improvements

    11/30/22
    changelog:
    -fixed some random reboots
    -integrated gapps (no need to flash anymore)

    Whats working?
    Wi-Fi
    RIL
    Mobile data
    GPS
    Camera
    Flashlight
    Camcorder
    Bluetooth
    Fingerprint reader
    Face unlock
    NFC
    Lights
    Sound/vibration
    etc.....

    Known issues:
    Just volte
    you tell me


    Visit official website @ crDroid.net
    Device Telegram
    crDroid Community Telegram
    crDroid Updates Channel
    Donate to help our team pay server costs
    5
    NOTICE: The following wall of text lists the steps to unbrick / update your galaxy S10 (SM-G973F) phone. If you have another model, this will probably not work for you.

    FreeRunner2017, the creator of this rom, was kind enough to guide me step by step with most of this procedure, so now I´m leaving this on this thread to help out the rest of you!

    I am assuming you have a bricked phone ( no boot or bootloop ). If your phone is not bricked just skip to Step 3.

    Let´s do this...


    No matter what you do to your galaxy S10 (SM-G973F) phone, if it ends up bricked, remember to start the phone in download ( bootloader mode ) in the following way:

    Phone must be powered off

    Press Vol down + bixby at the same time and then plug in a USB-C cable connected to a Windows PC which has the latest samsung USB drivers installed.

    You will be greeted by the light blue samsung download mode screen. If you have Odin opened up on your PC, you will notice that odin will report:

    <ID:0/003> Added!!

    If you don´t know what Odin is, then you need to google Odin for samsung, brush up on what it is, download it and then keep going with this wall of text.

    1. Find the stock samsung android files on the internet which are appropriate to your model, country and carrier. Google search:

    galaxy s10 SM-G973F android 12 stock rom

    I ended up finding mine at:


    It will take you some time to find the apropriate stock rom download link if you choose to use this link. There are thousands of stock roms on that website. If you are patient, you will find the right one for your phone. They are organized by country. you need to find the right carrier for the country as well.

    Once you find the right one, download it to your computer.

    2. Use odin to completely flash the stock samsung android appropriate for your phone. If the first one you download doesn´t work. Don´t despair. Get an older version or get a newer version and try again.

    Unzip the file you downloaded and load the unzipped files to their corresponding section:

    BL
    AP
    CP
    CSC ( use the CSC_OWA_.... file in this section instead of the HOME_CSC_OWA file since you most likely already bricked your phone )

    Press start in odin and wait for about 5 minutes for it to be done.

    If the process takes longer than 5 minutes and odin seems to be stuck on one file, check the bootloader screen on the phone for red text lines. If you find some line which reads something like:

    rev. check fail device: 16 binary:9 (DTB)

    it means you downloaded a wrong version of android for your current situation.

    the device parameter displays the currently installed firmware and the binary parameter displays the version you are trying to install.

    Search the internet again, download a newer/older version and try again.


    3. Once you successfully flashed the samsung stock rom, rebooted and are at the android start screen, try to skip most of the options the phone wants you to configure so that you end up with a semi working phone.

    Re-enable USB debugging, reauthorize your phone on your computer, power off the phone.

    This model of S10 has an SD card slot. Transfer the following files to an SD card and install the card on the phone. You don´t have to use a brand new card. You can use the card which you were using previously with your phone. TWRP won´t touch it.

    I will attach some files to this post and links to other files since some of them are not linked to the Author´s original post. These files will work for the galaxy S10 (SM-G973F) AKA beyond1lte. You will probably mess your phone even further if you use these files with another model

    Copy the following files to the root of the SD card or create a new folder and copy the files to it. Just remember the name you gave to the folder. Insert the SD card to the phone :

    vbmeta.tar ( attached to this post. provided by author )

    twrp-3.7.0_9-1-beyond1lte.img.tar ( twrp recovery ) Link to download from Author´s post

    crDroidAndroid-13.0-xxxxxxxx.zip (crdroid rom) Link to download from Author´s post

    NikGapps (google apps) Get the full version if you want to be able to restore from your google backup during initial setup. LINK to download provided by author

    app-release.apk (magisk delta) Link to download from Author´s post

    safetynetfix-x.x.x-zygisk-mod.zip ( magisk module for passing safetynet checks. The file is attached to this post. provided by author. )

    LSPosed-v1.8.5-6656-zygisk-release.zip ( magisk module for passing safetynet checks. The file is attached to this post. provided by author. )

    REMEMBER TO re-enable USB debugging, reauthorize your phone on your computer, power off the phone.

    4. Restart the phone in download ( bootloader ) mode. Once you´re back at the light blue screen, we are now ready to begin installing CRdroid V9.

    5. Open odin, make sure you get a:

    <ID:0/003> Added!!

    6. Load the TWRP.tar file in the AP tab.

    Load the vbmeta.tar file in the CP tab.

    7. Before you press start on Odin, grab your phone and be ready to press:

    vol up + bixby + power

    as soon as you click start on odin.

    this button sequence will force the phone to boot straight into TWRP recovery after flashing and before odin sends the command to reboot the phone.

    8. When twrp recovery loads, the first thing you must do is tap on wipe - tap Format Data - swipe to factory reset.

    VERY IMPORTANT: Once data is formatted, tap the back button until you get to the main menu. Tap reboot, then tap recovery in order to boot back into twrp recovery again.

    9. Then go to the install menu and and load from the SD card:

    crDroidAndroid-13.0-xxxxxxxx.zip (crdroid rom)

    NikGapps-stock-arm64-13-20220827-signed.zip (google apps)

    app-release.apk (magisk delta)

    Go ahead and flash.

    The install will take a couple of minutes. Once it´s done, wipe cache and reboot to system.

    CrDroid will boot for the first time and it will ask you to set up the phone.

    10. Once the phone is set up, go to the app drawer, select the files app, navigate to the SD card and tap on the:

    app-release.apk (magisk delta)

    file you copied to the SD card in step 3. Yes, you installed this during the twrp flash, but you need to do it again.

    Magisk will install and you will have to reboot.

    11. OPTIONAL. If safety net is important to you, open magisk, tap the modules icon on the bottom right. Tap the:

    Install from storage icon and install from the sd card:

    safetynetfix-x.x.x-zygisk-mod.zip

    reboot.

    go back to the same modules icon in magisk and install:

    LSPosed-v1.8.5-6656-zygisk-release.zip

    reboot.

    Go back to magisk and on the front screen tap on the gear icon on the top right.

    On that screen, set everything as the following screen shots:

    magisk_hide_1.jpg


    magisk_hide_2.jpg


    magisk_hide_3.jpg


    12. Just to make sure you have done everything correctly, got to the play store and install the app:

    SafetyNet test

    If you pass the test, you are ready to rock your new CrDroid V9 Android 13 phone.

    13. If you like to use Gcam as your phone camera. I found one that works well with the S10 (SM-G973F) and this ROM:


    get this one:

    MGC_8.1.101_A9_GV2b_snap.apk

    Enjoy!

    Shout out to FreeRunner ( the author of this ROM ) for guiding me step by step to sort out my lack of knowledge without expecting anything in return. He is one cool dude.

    P.S. Please don´t spam me if this wall of text didn´t work for you. I am not an android expert. I just told you everything I know. :) LOL...
    4
    New builds are up!

    06/01/2023
    changelog:
    - Synced CrDroid sources
    - Minor fixes
    3
    I decided to remove gapps because some people would rather have it without
    3
    New Builds Are Up!!!!!!
    Updates:
    12/16/22
    changelog:
    -merged december update android-13.0.0_r16
    -synced sources
    -many improvements