[ROM][13][UNOFFICIAL][redfin] Evolution-X | 7.5-Menudo |TQ1A.230105.001.a2 UPDATED Jan-16-2023

Search This thread

Raz0Rfail

Senior Member
Oct 24, 2013
234
123
If someone got high battery drain in 7.3 check at first the battery usage in the settings app.
I found that the connectivity thermal power manager used most of the battery. See screenshots attached.

I disabled it in termux with root permissions. Without root I couldn't execute the pm command.
I know their is a way to disable it with adb but I was to lazy to find it out.
So if you have the same using the most battery and you have root on your phone follow this:
Open termux or other terminal client for Android.
Execute this commands:
Bash:
su
pm disable com.google.android.connectivitythermalpowermanager

In Version 7.2 I disabled the HBMVS Manager because it sucked much Battery in 7.2. On 7.3 it's alreay disabled on my side, because I made a dirty upgrade, without issues.
to disable it with root execute this 2 commands:
Bash:
su
pm disable com.android.hbmsvmanager

After you charged the phone completly up to 100 % this both apps shouldn't appear in the battery consumption list and your battery discharge will last much more time.
 

Attachments

  • Screenshot_20221121-125743_Einstellungen.png
    Screenshot_20221121-125743_Einstellungen.png
    191.5 KB · Views: 75

rhplusa10

Senior Member
Feb 18, 2011
253
89
Los Angeles
Now I am on this rom!
I was on and12 version, and dirty flash to 7.3. so far so good.

I am only 24hrs use, cannot tell much but seems bugs fixed, also some features on and12 version are gone.

Someone mentioned bluetooth volume is so low, but it is ok for me. I use bluetooth headset all the time, i do not think volume is lower. It could be from dirty flash.

I have fossil watch, there is neutered fossil app which forced close on this rom. I might need to use stock app. This might be caused from and13.

Quick setting looks almost same as and12. Someone was curious for it.. quick setting tab animation has less choice. I used to use flip vertically but does not exist anymore.

Typing arrow on navbar when keyboard is on feature is also gone.

When I change theme for navbar(3 buttons), the home button always shows circle shadow, so cannot use other than stock, otherwise home button looks wierd.

Many people mentioned something thermal service drains battery, i also saw and disabled.

When screen off, i always use ambient screen on, but sometimes it turns off and dt2w does not work when this happens.

Other than that, all looks good.
Those bugs might be from dirty flash.

On the and12 version, there was bluetooth bug.
While connected my headset, if another bluetooth is connected, the mic does not work. Even the 2nd bluetooth is disconnected, the mic on 1st bluetooth does not work.
Also bluetooth is connected during phone call, same happens.

That is critical issue for me since i work from home and always use my headset.
I hope this is fixed on this rom. Have not tried yet.

Edit: still have the bluetooth issue. I may try clean flash.
 
Last edited:
  • Like
Reactions: ChillerMarvin

rhplusa10

Senior Member
Feb 18, 2011
253
89
Los Angeles
I have been used this rom since and12 for couple of months, and found there is bluetooth issue regardless the version of this rom.

This is scenario how it is issue.

1. Connect bt during active call, mic does not work.

2. 2 bt devices are connected, and one is disconnected, samething happens. Have to disconnect all bt devices and connect one again for normal operation.

The rom is very good for me, so many features, but only this issue makes big problem for me since i use my phone as work phone, about 10times teams meeting every day.

This is only and13rom so far, i tried stock and13 with AOSPmod but still lack of features as this rom.

Back to crdroid 12 for now. No bt issue here.
I hope you can fix it someday :)

Oh, for battery life for me, it was ok after disabling the 2 services mentioned above.

Edit: looks like the Bluetooth issue is not from this rom. I have same issue with crdroid.
I mainly use Teams for conferences, it cam be the app issue.

So, evox rom could be flawless!
 
Last edited:

ItsGarek

Member
Aug 15, 2018
6
1
It doesn't boot, I just get stuck on the boot screen. I've even tried installing the tq1a.221205.011 factory image, then I flashed boot and vendor boot, wiped data and installed the ota update through adb. Any ideas?
 

ItsGarek

Member
Aug 15, 2018
6
1
Try 2022 November stock.
Still no luck. It's just the google logo and then a black screen afterwards I've just flashed redfin-tp1a.221105.002 (2022 November Stock) after rebooting into fastboot I've flashed vendor boot and boot on both partitions, wiped data and as usual installed the ota update through adb..

Update: I ended up reading the whole pixel 5 forum and it didn't help me one bit (kill me). BUT I've downloaded the 7.2 version, and this one just works?! So yeah I still can't boot 7.3 in case you have any other ideas I am keen on trying again ;)
 
Last edited:

vineed0

New member
Mar 28, 2021
2
1
26
Ukraine
Meizu Pro 7
Google Pixel 3
Все равно не повезло. Это просто логотип Google, а затем черный экран. Я только что прошил redfin-tp1a.221105.002 (ноябрьский сток 2022 г.) после перезагрузки в fastboot я прошил загрузку поставщика и загрузку на обоих разделах, стер данные и, как обычно, установил ota обновить через адб..

Обновление: я прочитал весь форум по пикселям 5, и это мне ничуть не помогло (убейте меня). НО я скачал версию 7.2, а эта просто работает?! Так что да, я все еще не могу загрузить 7.3, если у вас есть другие идеи, я очень хочу попробовать еще раз.;)
If you look at the file of the firmware itself, you can see that there is already build 221205, and not as it is written in the header 221105, and the boot and vendor _boot files apparently remained with the old one.

I tried to install a stock image starting from the latest for pixel 13.0.0 (TQ1A.230105.001, Jan 2023), stopped at 13.0.0 (TP1A.221005.002, Oct 2022), tried everything in between, but nothing helped.

I'm sure that the problem is in the files of the author's boot and vendor _boot, because he updated the image, but there are no boot files.
I tried and overwrite both slots (A, B) but that didn't help either.

We are just waiting for the author to tell us about this)
All positive and good)
 
  • Love
Reactions: ItsGarek

ItsGarek

Member
Aug 15, 2018
6
1
If you look at the file of the firmware itself, you can see that there is already build 221205, and not as it is written in the header 221105, and the boot and vendor _boot files apparently remained with the old one.

I tried to install a stock image starting from the latest for pixel 13.0.0 (TQ1A.230105.001, Jan 2023), stopped at 13.0.0 (TP1A.221005.002, Oct 2022), tried everything in between, but nothing helped.

I'm sure that the problem is in the files of the author's boot and vendor _boot, because he updated the image, but there are no boot files.
I tried and overwrite both slots (A, B) but that didn't help either.

We are just waiting for the author to tell us about this)
All positive and good)
Thank you for making things clear for me. It all makes sense now.
I'm going to stay on 7.2 till we get more updates from the author
 
  • Like
Reactions: vineed0

fress

Senior Member
Dec 13, 2012
578
100
Samsung Galaxy S21
Pokud se podíváte na soubor samotného firmwaru, můžete vidět, že již existuje sestavení 221205 a ne jak je napsáno v hlavičce 221105 a soubory boot a vendor _boot zřejmě zůstaly se starým.

Zkusil jsem nainstalovat stock image počínaje nejnovější pro pixel 13.0.0 (TQ1A.230105.001, leden 2023), zastavil jsem se na 13.0.0 (TP1A.221005.002, říjen 2022), zkusil vše mezi tím, ale nic nepomohlo.

Jsem si jistý, že problém je v souborech autorova bootu a dodavatele _boot, protože aktualizoval image, ale nejsou tam žádné bootovací soubory.
Zkoušel jsem přepsat oba sloty (A, B), ale ani to nepomohlo.

Jen čekáme, až nám o tom autor řekne)
Vše pozitivní a dobré)
I have the same problem with pixelexperience. Then I use the guide from the lineage site with Los vendor_boot and everything is fine. Pe+ is flashed and boot great.
 

Top Liked Posts

  • There are no posts matching your filters.
  • 6
    UPDATED FOR JANUARY 2023

    Notes:
    Lots of new stuff in this version
    new launcher packed with lots of new customization options
    lock screen clock fonts
    shortcut presentation options
    ...and more!

    I added bromite webview
    I deleted turboadapter/device health services because it kept crashing and presentiting an an screen alert indicating such that required user action to dismiss each instance (only occurred every 5-10 min but still annoying)
    I added wireguard support to the kernel
    I noticed it no longer passes safety net. It's possible I didn't inlcude something in porting this ROM that is needed to pass this (aka the right fingerprint). If I fix that I'll update this post. Otherwise I leave you to your own devices to address this if passing is important to you.
    If someone else can vouch that they were able to flash ontop of their previous version, that would be appreciated. Until someone indicates it works, I can't say for sure whether or not you will lose data flashing this. (I signed it with the same keys as before so I think it will be ok but someone on here needs to verify)

    I didn't update last month because I switched my laptop from linux mint to QubesOS. There was a bit of a learning curve for me in adopting QubesOS but am back on track now. I built this ROM in a paravirtualized debain 11 system on this laptop (AMD processor and 32GB RAM by crucial)

    Enjoy!
    1
    It doesn't boot, I just get stuck on the boot screen. I've even tried installing the tq1a.221205.011 factory image, then I flashed boot and vendor boot, wiped data and installed the ota update through adb. Any ideas?
    Try 2022 November stock.
    1
    Все равно не повезло. Это просто логотип Google, а затем черный экран. Я только что прошил redfin-tp1a.221105.002 (ноябрьский сток 2022 г.) после перезагрузки в fastboot я прошил загрузку поставщика и загрузку на обоих разделах, стер данные и, как обычно, установил ota обновить через адб..

    Обновление: я прочитал весь форум по пикселям 5, и это мне ничуть не помогло (убейте меня). НО я скачал версию 7.2, а эта просто работает?! Так что да, я все еще не могу загрузить 7.3, если у вас есть другие идеи, я очень хочу попробовать еще раз.;)
    If you look at the file of the firmware itself, you can see that there is already build 221205, and not as it is written in the header 221105, and the boot and vendor _boot files apparently remained with the old one.

    I tried to install a stock image starting from the latest for pixel 13.0.0 (TQ1A.230105.001, Jan 2023), stopped at 13.0.0 (TP1A.221005.002, Oct 2022), tried everything in between, but nothing helped.

    I'm sure that the problem is in the files of the author's boot and vendor _boot, because he updated the image, but there are no boot files.
    I tried and overwrite both slots (A, B) but that didn't help either.

    We are just waiting for the author to tell us about this)
    All positive and good)
    1
    If you look at the file of the firmware itself, you can see that there is already build 221205, and not as it is written in the header 221105, and the boot and vendor _boot files apparently remained with the old one.

    I tried to install a stock image starting from the latest for pixel 13.0.0 (TQ1A.230105.001, Jan 2023), stopped at 13.0.0 (TP1A.221005.002, Oct 2022), tried everything in between, but nothing helped.

    I'm sure that the problem is in the files of the author's boot and vendor _boot, because he updated the image, but there are no boot files.
    I tried and overwrite both slots (A, B) but that didn't help either.

    We are just waiting for the author to tell us about this)
    All positive and good)
    Thank you for making things clear for me. It all makes sense now.
    I'm going to stay on 7.2 till we get more updates from the author
    1
    I flash only vendor boot image from lineageOS into both slots, sideloaded rom and it booted fine. Will see how is going in time.
    cool going to give it a try now
  • 6
    UPDATED FOR JANUARY 2023

    Notes:
    Lots of new stuff in this version
    new launcher packed with lots of new customization options
    lock screen clock fonts
    shortcut presentation options
    ...and more!

    I added bromite webview
    I deleted turboadapter/device health services because it kept crashing and presentiting an an screen alert indicating such that required user action to dismiss each instance (only occurred every 5-10 min but still annoying)
    I added wireguard support to the kernel
    I noticed it no longer passes safety net. It's possible I didn't inlcude something in porting this ROM that is needed to pass this (aka the right fingerprint). If I fix that I'll update this post. Otherwise I leave you to your own devices to address this if passing is important to you.
    If someone else can vouch that they were able to flash ontop of their previous version, that would be appreciated. Until someone indicates it works, I can't say for sure whether or not you will lose data flashing this. (I signed it with the same keys as before so I think it will be ok but someone on here needs to verify)

    I didn't update last month because I switched my laptop from linux mint to QubesOS. There was a bit of a learning curve for me in adopting QubesOS but am back on track now. I built this ROM in a paravirtualized debain 11 system on this laptop (AMD processor and 32GB RAM by crucial)

    Enjoy!
    4
    EvoBanner.png


    UPDATED FOR JANUARY 2023
    I am not affiliated with the official Evolution-X team.

    link to kernel source: https://github.com/HubertVonJass/vendor_google_redfin_13
    my other repos for the device and vendor are there as well.

    downloads:
    flash the vendor_boot and the boot imgs. Then adb sideload the zip file in recovery.

    Notes:
    Lots of new stuff in this version
    new launcher packed with lots of new customization options
    lock screen clock fonts
    shortcut presentation options
    ...and more!

    I added bromite webview
    I deleted turboadapter/device health services because it kept crashing and presentiting an an screen alert indicating such that required user action to dismiss each instance (only occurred every 5-10 min but still annoying)
    I added wireguard support to the kernel
    I noticed it no longer passes safety net. It's possible I didn't inlcude something in porting this ROM that is needed to pass this (aka the right fingerprint). If I fix that I'll update this post. Otherwise I leave you to your own devices to address this if passing is important to you.
    If someone else can vouch that they were able to flash ontop of their previous version, that would be appreciated. Until someone indicates it works, I can't say for sure whether or not you will lose data flashing this. (I signed it with the same keys as before so I think it will be ok but someone on here needs to verify)

    I didn't update last month because I switched my laptop from linux mint to QubesOS. There was a bit of a learning curve for me in adopting QubesOS but am back on track now. I built this ROM in a paravirtualized debain 11 system on this laptop (AMD processor and 32GB RAM by crucial)

    Enjoy!
    2
    If someone got high battery drain in 7.3 check at first the battery usage in the settings app.
    I found that the connectivity thermal power manager used most of the battery. See screenshots attached.

    I disabled it in termux with root permissions. Without root I couldn't execute the pm command.
    I know their is a way to disable it with adb but I was to lazy to find it out.
    So if you have the same using the most battery and you have root on your phone follow this:
    Open termux or other terminal client for Android.
    Execute this commands:
    Bash:
    su
    pm disable com.google.android.connectivitythermalpowermanager

    In Version 7.2 I disabled the HBMVS Manager because it sucked much Battery in 7.2. On 7.3 it's alreay disabled on my side, because I made a dirty upgrade, without issues.
    to disable it with root execute this 2 commands:
    Bash:
    su
    pm disable com.android.hbmsvmanager

    After you charged the phone completly up to 100 % this both apps shouldn't appear in the battery consumption list and your battery discharge will last much more time.
    2
    Where can I get 7.2? Would anyone kindly reup?
    I just re-upload. Evo 7.2
    2
    Aospmods magisk module will add some stuff you guys need 👍🏻

    I want to say that I tried to install it on the unbound evolution x rom and it didn't work I ended up in a bootloop, have you tried it on this rom yet

    Edit: It works on this rom