[ROM] [2.3.6] Blur Daily Driver Rom + Webtop [45.21.78] [Dec10]

[pinguy1982]

This is based on the official 4.5.2A-51_OLL-17.8 firmware (its the 2.3.6 Bell rom) and will work with both INTL & AT&T users. Most of the Blur apps have been updated in this version with new looks and features. The Camera on this version is really good. Takes much better images then any of the other BlurCamera's I have tried. Also the gallery is a huge improvement over the older ones, looks much better and a lot faster. Plus as this is the Bell firmware it hasn't got all the AT&T menus in the settings.

The only changes I have made is removed the bundled Bell apps plus added a few tweaks that I see as a must as it fixes or addresses issues that people have with the default Atrix software.

If anyone wants to fork this and add extra features please feel free to do so. You do not need to ask me before hand. I am even willing to host the ROM if you have no where to store it. So if you feel you can improve upon the ROM please do.

Changes Made:

• The ROM is SuperCharged.
• Its Rooted and has Busybox installed.
• Fully DeOdexed and zipaligned
• No changes made to the theme so no more disappearing status bar.
• 1080p video recording and 5 finger multi touch.
• Raindrop Fix
• Beats Audio + XLound
• Bravia HD Mobile
• Jug6 Battery FIX + tweaks I have made. Gives the best battery performance of any Blur ROM when set to 1.0 GHz.
• Improved AGPS
• Adblocker
• faux123 026 1.45 GHz kernel with a CPU app to under-clock it for even better battery life.
• Using the CM7 APN list. AT&T users that are having data problems try this.

Due to this only having a few locales I have added MoreLocale 2 so you can select your language. I'm from the UK and its not one of the locales that is listed in the blur setup. It can be set to English UK, its just a bit of a pain setting up as you need to skip setup, select MoreLocale 2 and put in en GB and then run blur setup. But you only need to do this once. So its not a huge deal. This also goes for anyone else that haven't got their locale listed. Just skip the blur setup and select MoreLocale 2 and select your locale.

Root Uninstall is also added so you can easily remove system apps you don't want. Its also a pretty nice app to manage your normal installed apps.

You install this like you would with any other ROM. Make sure you have a fairly well charged phone before attempting flashing this. Because this also comes with the webtop it does take awhile to install.

*NEW* [Dec 10] Vanilla Download: 423 MB

http://tinyurl.com/vanilla-stock-blur-webtop

MD5: 6e08268f5798123664f9ec4b15d7bfd1

Wish/To-do list:

• LS HDMI
• WebTop over HDMI
• HDMI Mirroring
• Toggles in notification bar - Can now be added with this zip.
• Multilingual in blur setup.

IF YOU GET A BOOTLOOP PULL THE BATTERY AND REBOOT.

 

[miko85]

will this work for att guys too?

 

[lebmb]

looks good
any way to make the luncher with 4 rows instead of 5?

 

[pinguy1982]

will this work for att guys too?

Unsure if it will work as is, but if you install the ATT kernel from here after flashing the ROM it will work then.

 

[miko85]

wow makes sense im back to nottach right now been on miui and cm9 for so long i forgot how to work factory **** i will reply back after flashing thanks for your work

 

[ATRIXXIRTA]

I had stock 2.3.6 on my bell atrix when I first rooted my phone back in February???

 

[pinguy1982]

I had stock 2.3.6 on my bell atrix when I first rooted my phone back in February???

I am from the UK. We haven't seen a 2.3.6 update. We could get 2.3.6 working with a custom kernel but I had problems with random reboots and calls getting cut off. It also had really bad battery life and over heated often. But this version is using the new bell kernel that was only released a few weeks ago here and I haven't had any of them issues since I have been using it.

The bell kernel is the first official kernel that will work for international users on 2.3.6

 

[ATRIXXIRTA]

When I was on 2.3.6 my battery life was ****!! lol

Hopefully the kernel in this build is better then the one that came with the bell 2.3.6 update back in feb

 

[decker39]

I've got a UK Atrix and tried to install this 3 times earlier, just stays on the unlocked screen, i waited 20 mins before i did a battery pull. Come from CM7, and did all of the neccessary wipes first :-(

Sent from my MB860 using xda premium

 

[terminator1983]

EDITED

 

[wobo]

Does it contain polish language?

 

[olorin]

Unsure if it will work as is, but if you install the ATT kernel from here after flashing the ROM it will work then.

Works great !!!!!

Thanks, i have had many reboots with nottach4g and none now

Sent from my SGH-T989 using xda premium

 

[emel-iine-6z]

i flashe this ROM like Nottach ROM ?!

 

[CaelanT]

OP..........Might want to change the thread title to reflect this has the 2.3.6 webtop and not the "new webtop", as some people may think it has Webtop 3.0 from the upcoming ICS update.

 

[capercb]

I've got a UK Atrix and tried to install this 3 times earlier, just stays on the unlocked screen, i waited 20 mins before i did a battery pull. Come from CM7, and did all of the neccessary wipes first :-(

Sent from my MB860 using xda premium

nevermind

 

[pinguy1982]

Does it contain polish language?

Yes.

OP..........Might want to change the thread title to reflect this has the 2.3.6 webtop and not the "new webtop", as some people may think it has Webtop 3.0 from the upcoming ICS update.

Who in there right mind would think this comes with Webtop 3.0? Webtop 3.0 is just ICS in tablet mode. This is GB so would never be able to run Webtop 3.0. Also I give the version number of the Webtop in the OP. This is the latest webtop for GB.

Saying this is Webtop 2.3.6 means nothing. The latest Bell firmware that is 2.3.6 is running an older version of webtop. That version comes with Firefox 7.

I've got a UK Atrix and tried to install this 3 times earlier, just stays on the unlocked screen, i waited 20 mins before i did a battery pull. Come from CM7, and did all of the neccessary wipes first

Sent from my MB860 using xda premium

Try wiping dalvik cache or re-downloading. Could be a bad download.

 

[decker39]

nevermind

What's that supposed to mean ??

Sent from my MB860 using xda premium

 

[capercb]

What's that supposed to mean ??

Sent from my MB860 using xda premium

i was having the same problem as you . try everything and still nothing ...i tried twice and nothin ..thats all

 

[ninjalandpirate]

I think its likely that this is in fact NOT stock 2.3.6 but just a striped down version of the 2.3.6 Nottachtrix rom. i'm pretty sure that stock 236 doesn't have the toggle in the notification area. and in the first post for this rom it says based heavily on Notatchtrix.

I have tried EVERY rom, available for attrix in every flavor flashing multiple time to try to achieve stability and maximium hacability and performance. i think i'm sad to say i'm at the end of my tether as this place were all searching for just doesn't exist.

I regularly return to the only real rom to supply true stability and regular performance. 2.3.4 international ram fix.

On top of this not being a true stock rom. it's not perfect and i wish i could have some of the features of notachtrix but without the reboots and un-reliable behaviour.

I think the sun is most likely setting on our beloved Atrix. this may well not be the case for some US users. I wouldn't even mind being able to get hold of the TRUE stock SBF for my handset which i know just isnt available i have tried two orange sbfs that are in circulation and neither are quite right. 2.1.1 and 1.3 something.

We all need to appreciate that Nottachtrix is pretty much as good as it gets for us and if your after stability then use 234! simple.

i invite the opinion of others who consider me wrong!

 

[spanner3003]

Hi installed this rom got unlock screen hang so flashed 2.3.6 kernel works now but me fingerprint reader is not work can anyone help?