• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

[ROM][20/03]·· ▄ · .ErykineMT7 v1.1.0 - MT7-L09-L10 B137SP03 · KK-4.4.2 ·

Search This thread

EzerchE

Senior Member
Jan 31, 2013
268
53
Istanbul
Hello all,

I have bricked my Mate 7 as you can see in this threat;

http://forum.xda-developers.com/mat...ted-mate-7-t3096641/post60493213#post60493213

I can only enter to fastboot, tried to flash stock; boot.img, recovery.img, custom.img, system.img and cache.img but it still cannot boot.

Gives an error;
Error!
Func NO: 12 (FUNC_LOAD_IOM3)
Error NO: 1

on rescue mode page. and cant enter to recovery or 3 buttons upgrade page.

I think only way is flashing a full rom via;

fastboot update update.zip

I tried to flash ErykineMT7 but it gives error;

archive does not contain android-info.txt
archive does not contain android-product.txt

Is that possible to make this rom compatible with fastboot flash?

So we can unbrick our Mate 7's with this rom.
 

stuartb88

Member
Jun 7, 2013
21
2
Hey, great to see a custom ROM for this phone .
I ascend P7 L11, android 4.4.2 eui 2.3_ is your rom likely work on this too?
I've seen no ref. To L11 anywhere. This pH given to me by carrier optus Australia, on contract renewal, is L11 signify carrier version maybe?
Any advice wrlcome cheers
Stuie
 

shywiz

Member
Jan 11, 2009
5
0
I've successfully installed this ROM and have been using it for a while now without any issues.
However, I have attempted to do a factory reset from the settings menu, but once the phone reboots it's stuck in a boot loop.
I notice a short and immediate msg saying something about "authorization..." that flashes on and off once before the phone is stuck on the Huawei load screen.
Can someone advise what may be the cause of this and how it can be fixed?
I could really use some help in fixing this issue.
 

MohammadZkert

Senior Member
Aug 3, 2013
56
4
Sorry, but is there anyway to port the KangVIP advanced setting to this ROM? I mean, which files do I need to extract and what permissions should I assign to them?
 

liqn7

Senior Member
Mar 25, 2010
703
130
How do you get back to stock ROM once you flashed this ROM? (seeing as CWM restores aren't working)

Don't want to end up stuck in a boot loop :(
 

gersp

Senior Member
Nov 16, 2010
271
66
F
How do you get back to stock ROM once you flashed this ROM? (seeing as CWM restores aren't working)

Don't want to end up stuck in a boot loop :(

Hey,

I did this to go back to stock (Unlocked BL, Root & this ROM)

1. Go to the official PAge of Huawei and download an official Firmware (I went to the US-Site, Size: 1,3gb aprox.)
2. Look for the Thread: "[Custom Recovery] Tool for MT7-L09/ MT7-L10 (Asia)" by Fooox1, download the files and run the "run.bat" file. Select Stock Recovery, when asked
3. Copy the UPDATE.APP from Huawei`s Site to SDCARD/dload
4. Settings, Update, Update from Storage
5. After flashing, go an other time to 4 and look for an other Update

That's it ;)

Press the thanks button if helped :)
 
  • Like
Reactions: liqn7

tufoz

Senior Member
May 15, 2009
237
4
hi!
a problem.. even if a read an sms the counter on the icon persist to exist.. but if reply the number on the icon decrease..
somebody experiencing this issue?
 

tufoz

Senior Member
May 15, 2009
237
4
i'm on erykine...

i have a mate tl10 chinese..

how to revert to stock?

changed the recovery to stock recovery.. now on dload can't update.. "error"

i can enter fastboot
 

bubble_cat

Member
Nov 22, 2010
31
5
Toulouse
Waiting for it, I don't have much time now to build a kernel, so because that I didn't try anything, so if you do it, add please if you can and you like;

-add ROW I/O Scheduler (this will give more performance/battery)
-add Lulzactive or other more consistent like it cpu governor
-Do a -25mV in each frequency in voltage (more battery)
-Overclock (maybe you can do it at stock voltages)


Thanks

Hello, thank you for your work on MT7 software !
The changes you bring to the kernel are interesting, is this a kernel modification (and if i extract the kernel from your ROM, i'll get the features you mentioned in your first post) or a wider modification of the system ? I'm sure this little jewel could be optimised even further with different governors or maybe just some little mods like you did.

If you need me to test it, i can try flashing your kernel and get back to you, you won't have to tell me how to make a wipe or run some ADB commands ..

Hope you'll have some time to answer my questions ;)
 

Top Liked Posts

  • There are no posts matching your filters.
  • 37
    Reboot ROM after 20min from first boot. FULLY WORKING ON MT7-L09. WORKING ON MT7-L10, BUT ONLY WITH ONE SIM, NO DUAL SIM WORKING FOR NOW.
    . ErykineMT7 v1.1.0 - Based on Stock B137SP03 - 4.4.2 -
    l MULTILANGUAGE l


    676q6t.jpg
    2livok1.jpg

    nds975.jpg
    2cyntro.jpg

    qpl5vm.jpg
    9tmvcn.jpg

    2is8gaq.jpg
    2z738g1.jpg

    ohviq8.jpg
    102joer.jpg

    2cpw1na.jpg
    2ykgzex.jpg

    2qn8aoj.jpg
    2vadw0o.jpg


    Features:
    • Based on official stock ROM release: B137SP03
    • Kernel stock 3.10.30 -00246-g907f1ad-dirty
    • Rooted with SuperSU incuded - (Thanks to chainfire)
    • Android L Themed by default... Based on Shape mod theme by papaver (thanks him) and modified by me to change some things I didn't like.
    • AppDrawer included, no need to install a new lancher, having all features of EMUI, modified by me to get stylish drawer (thanks to JakedUp)
    • Gapps Included (Gmail, GooglePlay, Maps, etc...)
    • Optimized (tweaks) to get the best performance/battery.
    • Tweaks scheduler, I/O, VirtualMemory and CPU
    • LITED ROM, deleted unusable stuff and apps.
    • init.d support
    • Busybox support
    • Sqlite3 support
    • GPU 2D acceleration enabled by default.
    • Decreased vm.heapsize to get better multitasking performance
    • Other changes in build.prop
    • Retouched animations scaling to get a smooth sense.
    • More customizations and things included.
    • Polaris Office
    • Some other settings and files to get it fully working (thanks to KangVIP)
    • Zipaligned



    Requirements and Installation:

    Ascend Mate MT7-L09 or L10 with unlocked bootloader and CWM recovery installed.
    ------------------------------------------------------------------------------------------------------
    -Enter to recovery with [volume up, + power], make a backup of your rom if you like, before install the rom do a Wipe Factory /data, and Wipe Cache.
    -Flash the ROM .
    -Reboot and configure it. (It takes about 15min to apply all settings and tweaks inside it.)
    -Reboot once you've configured all to get the best performance.




    ChangeLog ErykineMT7
    1.1.0:
    • Fixed settings LTE selection (maybe you have to delete settings data or Wipe data/factory to bring it back with 1.1.0)
    • Re.edit animations for smooth sense between apps
    • Changed dpi by default to 440 (it requires a reboot after 20 min first boot). To go back to 480 dpi, edit with some editor /system/build.prop to 480dpi, select 480dpi theme and reboot
    • New theme Aurora created by me and based on other ones (thanks a busywait, Mix_BbN, iconfans, 胡博文, fooox3 and maybe more people I forget now), edited things on theme that don't fit, or don't like.
    • Edited nav bar theme images to 440dpi
    • Modded lowmemorykiller settings to leave a bit more free ram
    • Modified CPU and governor settings to get some more performance when screen is on.
    • Enabled 8 cores with screen on and only 4 with screen off (battery saving with screen off)
    • Try to fix dualsim settings to make it working on MT7-L10, but the most probably is dualsim not working on L10, only 1 sim as the base is for L09.
    • Droping cachés+more free ram with screen off.
    • Changed I/O scheduler to deadline and tweaked to performance.
    • Modified appdrawer box with more apps to 440dpi
    • Zipalign


    ChangeLog older releases
    Code:
    [b][i]1.0.0:[/i][/b]
    [list]
    [*]Initial release
    [/list]




    Download ErykineMT7 v1.1.0 :

    [ Download ROM ]

    NOTE: If the notifications bar text is black once installed, re-apply Default (magazine) theme.
    It is recommended to enable Normal power mode (Settings/Power saving) to get the best performance.
    6
    Erykine 1.1.0

    1.1.0:
    • Fixed settings LTE selection (maybe you have to delete settings data or Wipe data/factory to bring it back with 1.1.0)
    • Re.edit animations for smooth sense between apps
    • Changed dpi by default to 440 (it requires a reboot after 20 min first boot). To go back to 480 dpi, edit with some editor /system/build.prop to 480dpi, select 480dpi theme and reboot
    • New theme Aurora created by me and based on other ones (thanks a busywait, Mix_BbN, iconfans, 胡博文, fooox3 and maybe more people I forget now), edited things on theme that don't fit, or don't like.
    • Edited nav bar theme images to 440dpi
    • Modded lowmemorykiller settings to leave a bit more free ram
    • Modified CPU and governor settings to get some more performance when screen is on.
    • Enabled 8 cores with screen on and only 4 with screen off (battery saving with screen off)
    • Try to fix dualsim settings to make it working on MT7-L10, but the most probably is dualsim not working on L10, only 1 sim as the base is for L09.
    • Droping cachés+more free ram with screen off.
    • Changed I/O scheduler to deadline and tweaked to performance.
    • Modified appdrawer box with more apps to 440dpi
    • Zipalign
    4
    Well this Rom is very smooth, except for some stutter every now and then but most of the time it's great. I can say it's leaps forward of the stock ROM. Gaming is improved too but I couldn't but notice that the device temperature during gaming is definitely higher than the stock ROM. It's not so hot that I have to put the device down but it's definitely much hotter than stock. Really appreciate your work here Neo, hope that the drawbacks improve in version 1.2

    Update: want to mention that very minimal lag happens after the device temperature goes up also the device rebooted once during playing Spiderman but that didn't happen again even when I tested it vigorously for longer periods of time.

    I'm working on that now, trying to keep the performance without waste too much battery not increasing the cpu freq much time, decreasing temperature too, for now tests are from 100% to 80% 1:55h screen time
    4

    Just got the source code from huawei gonna start work tonight.