when i flash xxbmd6 firmware... the baseband does not change?? why?? and i cannot using 3g mobile data, calling, messaging and etc... please help me?? urgent.... please...
[ROM][4.0.4][GT-S7562] KyleOPEN ROM v3.4.0 FIXED (for Galaxy S Duos) 26 July Update
- Thread starter cheatman
- Start date
yes.. flash via odin 3.07... i found baseband not change... CSC unknown... i don't know what to do
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|| Thx DEV Cheatman ||
||Your work is AWESOME
||
|| Keep it UP ! ||
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
For those who want TWRP :
|| Thx DEV Cheatman ||
||Your work is AWESOME
|||| Keep it UP ! ||
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
For those who want TWRP :
You could flash the file on Galaxy S Duos? Can you tell where you downloaded the file?Hey @cheatman I don't know if you saw that or not, but Cyanogenmod 11 for Samsung Galaxy Ace 2x works on our phone :silly: , but there is no network, at all. There's also a Jelly Bean version (Cyanogenmod 10.2) too, they both work but they have some minor bugs and none of them are smooth as they are supposed to be. I hope you can do something
Flashing it may brick your phone.. Be careful
Sent from my GT-S7562 using XDA Premium 4 mobile app
---------- Post added at 01:10 PM ---------- Previous post was at 12:26 PM ----------
Hey, Have you tested the ROM on the device? Share the link ASAP please.Hey @cheatman I don't know if you saw that or not, but Cyanogenmod 11 for Samsung Galaxy Ace 2x works on our phone :silly: , but there is no network, at all. There's also a Jelly Bean version (Cyanogenmod 10.2) too, they both work but they have some minor bugs and none of them are smooth as they are supposed to be. I hope you can do something
Sent from my GT-S7562 using XDA Premium 4 mobile app
Guys, just search Cyanogenmod 11 for Ace IIX, or this thread http://forum.xda-developers.com/showthread.php?t=2019146&page=404, which there are 2 developers who work on Cyanogenmod 11 and 10.2, and also 10.1 I think
Not working.. Not working!! *Guys, just search Cyanogenmod 11 for Ace IIX, or this thread http://forum.xda-developers.com/showthread.php?t=2019146&page=404, which there are 2 developers who work on Cyanogenmod 11 and 10.2, and also 10.1 I think
Sent from my GT-S7562 using XDA Premium 4 mobile app
guys ,
it working but alot of bugs.....[ major bug is no sim detection ]
Last edited:
Major reason for such issue is mount partitions...
As far as i remember, i never got bootloop after flashing roms on my device even after flashing cm11 on cosmic rom and vice versa...
Hello Cheatman sir! i need some deodexed apks! Can u help?Welcome to the KyleOPEN ROM for Galaxy S Duos
(Dual-Sim Phone / GT-S7562 device model)
KyleOPEN ROM Features:
- Based on stock S7562XXBMD6 ROM
- Debloated (see list of removed bloat below)
- CM9 Imported (see list of CM9 packages below)
- Deodexed / zipalligned (can be themed!)
- Rooted (incl. insecure kernel using chainfire modded adbd method)
- Custom boot image enabled
- Custom boot sounds enabled (wav only!)
- Busybox support
- Overclock / Governor Kernel
- init.d script support
- Add-on support
- OTA Update engine
- Google Now included
- Flashplayer support (download flash APK from here)
- Samsung S Voice support through add-on (see post #3)
- QtADB Support (get it here)
List of removed packages:
List of imported CM9 packages:
Installation instructions:Code:- CM9 Apollo Player (add-on) - CM9 Keyboard - CM9 Launcher (Hello Trebuchet!) - CM9 EMail & Exchange - CM9 Browser - CM9 Gallery (add-on) - CM9 File Manager - Magic smoke live wallpapers
WARNING: Flashing this ROM will make the orange triangle appear and increase the flash counter. Flash at your own risk, I am not responsible for your actions. Follow the instructions below ONLY if YOU are sure of what you are doing. Otherwise stop here. You can reset the counter and remove the triangle using the app developed by chainfire (triangle remover).
Installation Details & HowTo:
- The GT-S7562 has a download mode and a recovery mode. Both are boot modes that allow the device to start but enter a different configuration mode than regular Android start mode. Think of them like starting your PC and entering the BIOS instead of loading Windows as usual.
- The "download mode" is a boot mode that allows flashing bit-by-bit (very low level) data to partitions on your device. To enter download mode on the S7562 do the following: make sure the device is well charged (over 50%); remove all cables (this is important); power it off (don't reboot); hold volume down + home and power on the device (volume down+home+power). Then a warning will be displayed on screen. You must press Volume Up to enter download mode.
- As long as you can enter "download mode" you can recover your device. While in download mode, you can use the ODIN tool to flash recovery, boot and ROM images.
- The "recovery mode" is a boot mode that allows "safe mode" changes to be performed on the device. This is done using CWM, a tool that can be used to automate Android system changes to system files, partitions etc. To enter recovery mode on the S7562 do the following: make sure the device is well charged (over 50%); remove all USB cables (this is important); power it off (don't reboot); keep volume up + volume down + home and power on your device.
- To navigate in recovery mode, use the volume buttons to change active selection and the home button to make selections. The back button works as back button. When done working with recovery, go back all the way and select option to reboot system to boot your device normally.
- Before installing KyleOpen ROM, make sure you are running XXBMD6 as base ROM. If you skip this step, you may have network and signal problems after installing KyleOpen ROM. So, download the ROM image here and flash it from download mode using ODIN and PDA button BEFORE you continue!!!
- Download to your PC the custom recovery image that enables CWM, if you don't have it already, from here
- Reboot in download mode to flash CWM
- Unzip the file in your computer and start ODIN.
- Click the PDA button and select the "kyleopen-cwm5-v3.tar.md5" file.
- Connect your phone that is already in download mode. ODIN will display it as being connected on a COM port.
- Do not change any other options. Just click the "Start" button and wait. In about 1 minute, on your device there will be a loading bar displayed. Once done the phone will reboot itself normally. ODIN will tell you the flash was OK and restart your device. This operation will increase the flash counter and make the orange warning triangle appear. This is normal and is not a problem. From this point on, you can boot in recovery mode and flash CWM zips.
- Let the phone restart normally and boot up completely. Now you are ready to upgrade your stock ROM to KyleOPEN ROM.
Update Instructions:
- Make sure you are running a proper stock ROM (like XXBMD6 or any version of KyleOPEN ROM)
- Download the OTA update utility app attached to this post and install it if you didn't already.
- Run the KyleOpen Tools and check for updates. If your ROM does not have root access it's gonna be slow to start and may not show the proper information, but the update check and download will work just fine.
- Download the update and save it.
- Press reboot in recovery mode.
- Install the downloaded zip.
- Clear cache and davlik cache.
- Reboot system.
- Hit the thanks button or you will be ignored in the thread!
Note: The recovery ZIP also contains the stock recovery image. The stock ROM can also be found on http://www.sammobile.com
Mirrors for use without OTA updater:
Alternate download methods in case you don't want or can't use the OTA update utility can be found below. Download the ZIP files, copy them to your device and reboot in CWM to flash them.
Credits:
Cheers,Code:- Project Flulid team, for build.prop tweaks - leolawliet for disabling of CPU rendering - Mirko ddd for back button to kill app mod - einst31n for the facelift of the ROM logo and the default theme - VamshiStunner for his awesome work on the kernel, especially OC! - hybridmd, for the init.s script add-on to swap SD memory cards - P.thina for finding the fix for no network that some users had!!!! - nakedninja42 for face unlock tips - Samsung for the device and software development - Google and the Android community for an awesome OS - The CM9 team for their work on ICS - XDA Developers for letting us post our work, help others and unleash our devices - dsixda & chainfire for their previous work on Samsung devices - Everyone else out there that makes this worth the effort...
C.
Clock(digital).apk
Clock(funky).apk
Samsungkeyboard.apk
TouchwizHome.apk
Videoplayer.apk
WeatherWidget.apk
Windyweather.apk
You have quoted the OP why dont you read it? Search the thread for add-ons there is a package with all removed apks! You may find some you have requested in there... You may also try "Universal Deodexer" you will find it.. maybe
Sent from my GT-S7562 using xda app-developers app
Last edited:
Bro these file must not be more than 10-15 mb... bt removed package is of 118 mbYou have quoted the OP why dont you read it? Search the thread for add-ons there is a package with all removed apks! You may find some you have requested in there... You may also try "Universal Deodexer" you will find it.. maybe
Sent from my GT-S7562 using xda app-developers app
hm...:what:
of course there is a lot more in it! Open it and take out what you need didn't say you have to flash this.
You also could open a roms zip and grab what you want.
If you provide more information what's your intent you may get more help...
...good luck
Sent from my GT-S7562 using xda app-developers app
I know that but if i can get selected stuff, it could save data as well as time!
Our Apps
Get our official app!
The best way to access XDA on your phone
Nav Gestures
Add swipe gestures to any Android
One Handed Mode
Eases uses one hand with your phone