[ROM 4.2.1] JELLYBAM - v5.2.0 [31/01] [n7000] [AOKP | CM10.1 | DPIChanger]

[1c3_5n0w]

I get a status 7 error in 6.2 as well as 5.2

 

[daniel888chew]

did u get where to on hotspot?

Sent from my GT-N7000 using xda premium

 

[SirRhor]

Whoaaa !!! Jellybam 6.2.0 STABLE is online.
Successfully running for more than 4 hrs. absolutely no lag. and battery drain of only 10% ( with wifi on for sync, browsing, tweaking my launcher keeping display brightness lowest )
pie launcher works great. :good:
superb additions. Nice to see my fav ROM is back in form.
Thanx Dev.
( Waiting for my first payment. i would like to buy u guys a couple of beer cans. )

Is your keyboard working properly?

Sent from my GT-N7000

---------- Post added at 12:42 PM ---------- Previous post was at 12:41 PM ----------

did u get where to on hotspot?

Sent from my GT-N7000 using xda premium

Is coming on 6.3

Sent from my GT-N7000

 

[cuppacup]

keyboard seems strange. 1st boot and the keyboard is not there. reflash and still no keyboard. help please?

Sent from my GT-N7000 using Xparent Blue Tapatalk 2

 

[SirRhor]

keyboard seems strange. 1st boot and the keyboard is not there. reflash and still no keyboard. help please?

Sent from my GT-N7000 using Xparent Blue Tapatalk 2

You will have to wait until 6.3 comes out.

Sent from my GT-N7000

 

[cuppacup]

need to disable physical keyboard in setting to use the keyboard again. will wait for 6.3. thanks....

Sent from my GT-N7000 using Xparent Blue Tapatalk 2

 

[lastbronx]

Yes Keyboard is working fine. Just disable hardware keyboard from language and inputs>> Default
everything is working just fine except the Spen.
note: battery life is amazing. Deep sleep mode is nice addition. battery drain of just 2% in 8 hrs. Idle state.

 

[TheNoticer]

AW: [ROM 4.2.1] JELLYBAM - v5.2.0 [31/01] [n7000] [AOKP | CM10.1 | DPIChanger]

Is your keyboard working properly?

Sent from my GT-N7000

---------- Post added at 12:42 PM ---------- Previous post was at 12:41 PM ----------



Is coming on 6.3

Sent from my GT-N7000

New homepage

http://www.modmydroid.net/jellybam/

Download version 6.2
http://goo.im/devs/JellyBam/Samsung Galaxy Note - n7000

For all who are getting error 7 while flashing

If you are on philz kernel
flash kang bang or hydracore kernel
Then boot into recovery and wipe data cache and dalvik
Then flash the ROM

If you are on Kangbang or other cm kernel
Download again


Posting questions in general section may cause male impotence. xda premium (Closed Beta)

 

[regisso66]

Do you know what is pie control ?

 

[TheNoticer]

AW: [ROM 4.2.1] JELLYBAM - v5.2.0 [31/01] [n7000] [AOKP | CM10.1 | DPIChanger]

Do you know what is pie control ?

Replace soft key with a pie

Posting questions in general section may cause male impotence. xda premium (Closed Beta)

 

[regisso66]

Jellybam 6.3.0 installed, wifi hotspot working fine now

 

[GunnerGeezer]

6.2 installed but keep getting error popup process.acore every 30 secs.
Anyone know how to stop it please?

Twitter: @GunnerGeezer

 

[dailyliar]

6.2 installed but keep getting error popup process.acore every 30 secs.
Anyone know how to stop it please?

Twitter: @GunnerGeezer

refer to this post >> http://forum.xda-developers.com/showthread.php?p=37681871#post37681871 I had the same problem too earlier.

 

[vts60]

6.2 installed but keep getting error popup process.acore every 30 secs.
Anyone know how to stop it please?

Twitter: @GunnerGeezer

full wipe, full format and flash the rom.

 

[kamparperak]

Im on JellyBam 4.1 now. I will udpate to JellyBam 6.3, do I need to flash a CM10.1 kernel first before flashing the rom or I can just full wipe and flash directly? Thanks.

 

[vts60]

Im on JellyBam 4.1 now. I will udpate to JellyBam 6.3, do I need to flash a CM10.1 kernel first before flashing the rom or I can just full wipe and flash directly? Thanks.

I recommend: full wipe and full format.

 

[kamparperak]

I recommend: full wipe and full format.

Full format meaning format system/preload/data? So just flash over 4.1 without flashing CM10.1 kernel?

 

[vts60]

Full format meaning format system/preload/data? So just flash over 4.1 without flashing CM10.1 kernel?

make sure you have a safe kernel
1) full wipe (data, cache, Dalvik, battery stats), full format (data, cache, system, preload, EMMC) (I recommend the important system)

2) Flash the ROM

 

[kamparperak]

make sure you have a safe kernel
1) full wipe (data, cache, Dalvik, battery stats), full format (data, cache, system, preload, EMMC) (I recommend the important system)

2) Flash the ROM

Thanks a lot for your help.
OT: I always want to know, say Im already rooted, like what Im on right now, if I format EMMC in recovery, will I lose root after format?

 

[vts60]

Thanks a lot for your help.
OT: I always want to know, say Im already rooted, like what Im on right now, if I format EMMC in recovery, will I lose root after format?

no.