[ROM] [4.4.4] CM11.0/SGT7 for the Kindle Fire [20140719]

Search This thread

twa_priv

Senior Member
Feb 10, 2011
1,701
4,472
153
CM11.0/KK 4.4.4 ROM with SGT7 Framework and Settings enhancements.

Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/

Otter

Download:

Dev-Host
Goo.im

Older CM10.2 builds can be found here or here.

Installation:

Make sure you have the latest FFF and a recent TWRP recovery installed.
Make a backup !!!
Wipe cache, dalvik, data and system (full wipe)
Install ROM
Install Google Apps from here
Reboot

Upgrade from a previous version of this ROM:

Reboot to recovery
Install ROM
Wipe cache/dalvik
Reboot

--------------------------------------------------------------------------------

OtterX - F2FS

Do NOT flash otterx builds if you did not follow Hashcode's instructions!
You also need to have your /data partition converted to F2FS as well!


Download

Dev-Host
Goo.im

Installation

Please follow Hashcode's instructions regarding:
- OtterX Bootloader
- TWRP for OtterX
- OtterX partition layout
- Wipe partitions
- Use adb to download and push rom and gapps.

adb push cm-11-xxxxxxxx-xxxx-otterx-sgt7.zip /sdcard/cm-11-xxxxxxxx-xxxx-otterx-sgt7.zip
adb push gapps-kk-xxxxxxxx-signed.zip /sdcard/gapps-kk-20140105-signed.zip

Then flash as usual (see above).

--------------------------------------------------------------------------------

Thanks to:

Hashcode
sbradymobile (and all other SGT7 developers)
CyanogenMod
...

--------------------------------------------------------------------------------

Sources:

https://github.com/loosethisskin
https://github.com/sgt7
https://github.com/KFire-Android
https://github.com/CyanogenMod
 
Last edited:

twa_priv

Senior Member
Feb 10, 2011
1,701
4,472
153
Each new build uploaded will include the latest CM11.0 and SGT7 changes:

Credits for the device and kernel sources go to Hashcode.

Changelog

[20140719]
* Security: implement a pin keypad shuffler [helicopter88 / omni]

[20140625]
* Android 4.4.4
* Kernel: snappy compression for ZRAM

[20140615]
* Ditched compiler flag optimizations
* Kernel compiled with Linaro 4.8.3

[20140605]
* Android 4.4.3

Note: The otterx build requires the data partition to be converted to F2FS.

[20140520]
* Latest device/kernel changes [Hashcode]
* Kernel: Linux 3.0.101
* Linaro GCC 4.8.3 2014.04 toolchain
* Compiler flag optimizations [JustArchi]

[20140502]
* Latest device/kernel and CM changes

* Additional OtterX build

[20140417]
* Latest device/kernel and CM changes

[20140323]
* Kernel: trim fix [Hashcode]

[20140314]
* Latest device and CM changes (e.g. IMDB fix [Hashcode])

[20140221]
* Latest device and CM changes

[20140129]
* Latest device and CM changes

[20131230]
* frameworks/native: Fix boot animation rotation problem when ro.sf.hwrotation is set to 90 or 270 [Clyde Tan]

[20131215]
* Settings: Fix for quick settings tiles and layout not loading [sbrady]

[20131212]
* Android 4.4.2
* Framework/Settings: Large recent thumbnails, recents panel color and dual pane preference [sbrady]
* Framework/Settings: Notification panel and quick settings tile color [sbrady]
* Kernel: zRAM (Enable in performance settings)

[20131208]
* Android 4.4.1

[20131206]
* Device: Enable translucent lockscreen
* Framework/Settings: Add setting to enable or disable navigation bar [sbrady]
* Framework/Settings: Add forceHighEndGfx property to override isHighEndGfx [sbrady]

Note:
You will need to check "High end gfx" in Performance settings to enable translucency because the KF is a low ram device (ro.config.low_ram) and translucency effects are disabled by default on such devices.
 
Last edited:

404-Not Found

Senior Member
Sep 12, 2012
1,399
138
0
Phoenix
Awesome.... no more waiting I can finally leave ICS.!!!!

Sent from my Galaxy Nexus using xda app-developers app

---------- Post added at 09:47 PM ---------- Previous post was at 09:45 PM ----------

Buttery Smooth..... I there any really big problems like the WiFi issue in Hashcodes build?

Sent from my Galaxy Nexus using xda app-developers app
 

404-Not Found

Senior Member
Sep 12, 2012
1,399
138
0
Phoenix
How can we fix this:

Sent from my Amazon Kindle Fire using xda app-developers app
 

Attachments

  • uploadfromtaptalk1376811549341.jpg
    uploadfromtaptalk1376811549341.jpg
    75.4 KB · Views: 9,445
R

rasputyn

Guest
Found a bug:

When trying to group icons in Trebuchet dock, Trebuchet FC's.

That was also bug in One S 4.3 unofficial, but someone managed to fix that.
 

Hyperiunn

Member
Apr 25, 2013
27
6
0
Edit: Made a mistake on my part. However I've been having some performance issues with this rom on a clean format. Just getting a lot of bad performance performance in emulators and the system UI.

Sent from my Amazon Kindle Fire using Tapatalk HD
 
Last edited:

timtlm

Senior Member
Mar 17, 2008
712
112
0
St Louis
Whenever I try to add a restricted profile, it reboots. The restricted profile still gets created as "new profile" but clicking to edit it, causes the settings to FC.
 

Top Liked Posts

  • There are no posts matching your filters.
  • 116
    CM11.0/KK 4.4.4 ROM with SGT7 Framework and Settings enhancements.

    Code:
    #include <std_disclaimer.h>
    /*
    * Your warranty is now void.
    *
    * I am not responsible for bricked devices, dead SD cards,
    * thermonuclear war, or you getting fired because the alarm app failed. Please
    * do some research if you have any concerns about features included in this ROM
    * before flashing it! YOU are choosing to make these modifications, and if
    * you point the finger at me for messing up your device, I will laugh at you.
    *
    */

    Otter

    Download:

    Dev-Host
    Goo.im

    Older CM10.2 builds can be found here or here.

    Installation:

    Make sure you have the latest FFF and a recent TWRP recovery installed.
    Make a backup !!!
    Wipe cache, dalvik, data and system (full wipe)
    Install ROM
    Install Google Apps from here
    Reboot

    Upgrade from a previous version of this ROM:

    Reboot to recovery
    Install ROM
    Wipe cache/dalvik
    Reboot

    --------------------------------------------------------------------------------

    OtterX - F2FS

    Do NOT flash otterx builds if you did not follow Hashcode's instructions!
    You also need to have your /data partition converted to F2FS as well!


    Download

    Dev-Host
    Goo.im

    Installation

    Please follow Hashcode's instructions regarding:
    - OtterX Bootloader
    - TWRP for OtterX
    - OtterX partition layout
    - Wipe partitions
    - Use adb to download and push rom and gapps.

    adb push cm-11-xxxxxxxx-xxxx-otterx-sgt7.zip /sdcard/cm-11-xxxxxxxx-xxxx-otterx-sgt7.zip
    adb push gapps-kk-xxxxxxxx-signed.zip /sdcard/gapps-kk-20140105-signed.zip

    Then flash as usual (see above).

    --------------------------------------------------------------------------------

    Thanks to:

    Hashcode
    sbradymobile (and all other SGT7 developers)
    CyanogenMod
    ...

    --------------------------------------------------------------------------------

    Sources:

    https://github.com/loosethisskin
    https://github.com/sgt7
    https://github.com/KFire-Android
    https://github.com/CyanogenMod
    42
    Each new build uploaded will include the latest CM11.0 and SGT7 changes:

    Credits for the device and kernel sources go to Hashcode.

    Changelog

    [20140719]
    * Security: implement a pin keypad shuffler [helicopter88 / omni]

    [20140625]
    * Android 4.4.4
    * Kernel: snappy compression for ZRAM

    [20140615]
    * Ditched compiler flag optimizations
    * Kernel compiled with Linaro 4.8.3

    [20140605]
    * Android 4.4.3

    Note: The otterx build requires the data partition to be converted to F2FS.

    [20140520]
    * Latest device/kernel changes [Hashcode]
    * Kernel: Linux 3.0.101
    * Linaro GCC 4.8.3 2014.04 toolchain
    * Compiler flag optimizations [JustArchi]

    [20140502]
    * Latest device/kernel and CM changes

    * Additional OtterX build

    [20140417]
    * Latest device/kernel and CM changes

    [20140323]
    * Kernel: trim fix [Hashcode]

    [20140314]
    * Latest device and CM changes (e.g. IMDB fix [Hashcode])

    [20140221]
    * Latest device and CM changes

    [20140129]
    * Latest device and CM changes

    [20131230]
    * frameworks/native: Fix boot animation rotation problem when ro.sf.hwrotation is set to 90 or 270 [Clyde Tan]

    [20131215]
    * Settings: Fix for quick settings tiles and layout not loading [sbrady]

    [20131212]
    * Android 4.4.2
    * Framework/Settings: Large recent thumbnails, recents panel color and dual pane preference [sbrady]
    * Framework/Settings: Notification panel and quick settings tile color [sbrady]
    * Kernel: zRAM (Enable in performance settings)

    [20131208]
    * Android 4.4.1

    [20131206]
    * Device: Enable translucent lockscreen
    * Framework/Settings: Add setting to enable or disable navigation bar [sbrady]
    * Framework/Settings: Add forceHighEndGfx property to override isHighEndGfx [sbrady]

    Note:
    You will need to check "High end gfx" in Performance settings to enable translucency because the KF is a low ram device (ro.config.low_ram) and translucency effects are disabled by default on such devices.
    33
    Optional - Disguise your Kindle Fire as a Nexus 7 [Thanks to eems01]

    For CM10.2 (Android 4.3): change_to_nexus7-4.3.zip
    For CM11.0 (Android 4.4.2): change_to_nexus7-4.4.2.zip
    20
    [20130903]
    * Device: libsensors: Close file descriptors [verygreen] (maybe this helps folks with occasional SODs and/or reboots)
    * Device: Dalvik startup with a low memory footprint [FuZZ]
    * Settings: Fixed FC when hitting back button in Quick Settings Tiles and layout
    * Settings: Show advanced device settings only if available [sbrady]
    * Trebuchet: Only use drawer back activity with drawer intent [sbrady]
    * Framework/Settings: Add option to remove halo button from the notification drawer [sbrady]
    * Trebuchet: Make menu in launcher optional [sbrady]
    * Settings: DPI Changer (Interface -> User interface -> LCD Density)
    * Settings: Added .25x and .75x animation scale (Developer Options)

    [20130903 Kernel]
    * Compiled with latest Linaro GCC 4.8.2 2013.08 toolchain
    * Linux 3.0.94
    19
    Moved on to CM11.0. OP Updated.
Our Apps
Get our official app!
The best way to access XDA on your phone
Nav Gestures
Add swipe gestures to any Android
One Handed Mode
Eases uses one hand with your phone