• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

[ROM][4.4.4] CyanogenMod 11.0 for A3000-H [23/10/2015]

Do you want odexed or deodexed nightlies?


  • Total voters
    19
  • Poll closed .
Search This thread

Riyas m droid

Member
Aug 2, 2015
11
1
23
nemmara
logo-cid.png

PREAMBLE
Here is my CM11 port for the Lenovo A3000-H, 100% unofficial. Contributions are welcome!
To be able to even flash it, you'll need to use my CWM Recovery.
NOTE: I have built and tested this on my Lenovo A3000-H (16 GB version with 3G). Before flashing, please make sure to be on Stock 4.2. Open up a terminal or an ADB shell and type the following:
Code:
getprop ro.product.board
.
Should you get a3000_prc_3gfull, you are good to go. Otherwise, you need to flash the right Stock ROM. The members @kupyxa4444 and @luckasfb have created such a Stock-based ROM, so if you are unable to find one - try to contact one of these two.

CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.4 (KitKat), which is designed to increase performance and reliability over stock Android for your device.

Code:
#include 
/*
 * Your warranty is now void.
 *
 * I am not responsible for bricked devices, dead SD cards,
 * thermonuclear war, or you getting fired because the alarm app failed. Please
 * do some research if you have any concerns about features included in this ROM
 * before flashing it! YOU are choosing to make these modifications, and if
 * you point the finger at me for messing up your device, I will laugh at you.
 */

CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.


NOT WORKING
  • Camera



WORKING
  • GPS
  • WiFi
  • Audio
  • Boots :p
  • SELinux
  • Sensors
  • Vibration
  • Bluetooth
  • HWComposer
  • Offmode charging
  • sw video en/decoding (not hw)
  • Internal and external sdcards
  • RIL/radio (only on SIM1, SIM2 is still broken and therefore disabled, you can re-enable it by setting persist.radio.multisim.config=dsds in your build.prop)



NOTE
Should you ever face any issues (in the recovery or the ROM), provide logs (use Google to find out how to gather those). Additionally, I need to know what ROM you're on, hence you have to mention the build number.
Hint: "It doesn't work or I get error Status XY" are not bug reports and will be ignored. To keep the thread clean, use DevDB for real bug reports



DOWNLOAD
Instructions:


I have spent a lot of time on this project and I still do - hence, donations would be highly appreciated. :D

My builds can be found here.​



SOURCEs
Device tree (branch cm-11.0)
Kernel (branch cm-11.0)
OmniROM Gerrit (topic mt6589)​



CREDITs
  • chrmhoffmann
  • kashifmin
  • Grarak
  • xplodwild
  • Dr-Shadow
  • superdragonpt
  • EnerJon
  • kupyxa4444

XDA:DevDB Information
CyanogenMod 11 for the Lenovo A3000-H, ROM for the Lenovo A3000

Contributors
Olivier
Source Code: https://github.com/lenovo-a3-dev

ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod

Version Information
Status: Beta

Created 2014-11-26
Last Updated 2015-10-23
Iam running 4.2 but it is not stock but a call ROM.will this work on it?
 

ron123110

New member
Mar 4, 2017
3
1
logo-cid.png

PREAMBLE
Here is my CM11 port for the Lenovo A3000-H, 100% unofficial. Contributions are welcome!
To be able to even flash it, you'll need to use my CWM Recovery.
NOTE: I have built and tested this on my Lenovo A3000-H (16 GB version with 3G). Before flashing, please make sure to be on Stock 4.2. Open up a terminal or an ADB shell and type the following:
Code:
getprop ro.product.board
.
Should you get a3000_prc_3gfull, you are good to go. Otherwise, you need to flash the right Stock ROM. The members @kupyxa4444 and @luckasfb have created such a Stock-based ROM, so if you are unable to find one - try to contact one of these two.

CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.4 (KitKat), which is designed to increase performance and reliability over stock Android for your device.

Code:
#include 
/*
 * Your warranty is now void.
 *
 * I am not responsible for bricked devices, dead SD cards,
 * thermonuclear war, or you getting fired because the alarm app failed. Please
 * do some research if you have any concerns about features included in this ROM
 * before flashing it! YOU are choosing to make these modifications, and if
 * you point the finger at me for messing up your device, I will laugh at you.
 */

CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.


NOT WORKING
  • Camera



WORKING
  • GPS
  • WiFi
  • Audio
  • Boots :p
  • SELinux
  • Sensors
  • Vibration
  • Bluetooth
  • HWComposer
  • Offmode charging
  • sw video en/decoding (not hw)
  • Internal and external sdcards
  • RIL/radio (only on SIM1, SIM2 is still broken and therefore disabled, you can re-enable it by setting persist.radio.multisim.config=dsds in your build.prop)



NOTE
Should you ever face any issues (in the recovery or the ROM), provide logs (use Google to find out how to gather those). Additionally, I need to know what ROM you're on, hence you have to mention the build number.
Hint: "It doesn't work or I get error Status XY" are not bug reports and will be ignored. To keep the thread clean, use DevDB for real bug reports



DOWNLOAD
Instructions:


I have spent a lot of time on this project and I still do - hence, donations would be highly appreciated. :D

My builds can be found here.​



SOURCEs
Device tree (branch cm-11.0)
Kernel (branch cm-11.0)
OmniROM Gerrit (topic mt6589)​



CREDITs
  • chrmhoffmann
  • kashifmin
  • Grarak
  • xplodwild
  • Dr-Shadow
  • superdragonpt
  • EnerJon
  • kupyxa4444

XDA:DevDB Information
CyanogenMod 11 for the Lenovo A3000-H, ROM for the Lenovo A3000

Contributors
Olivier
Source Code: https://github.com/lenovo-a3-dev

ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod

Version Information
Status: Beta

Created 2014-11-26
Last Updated 2015-10-23
---------------------------------------------------------

CM11 and gAPPS can be downloaded here
CMW by Oliver can be downloaded from the official xda topic (link)
 
  • Sad
Reactions: WunderWungiel

mazo3000

New member
May 28, 2021
3
0
logo-cid.png

PREAMBLE
Here is my CM11 port for the Lenovo A3000-H, 100% unofficial. Contributions are welcome!
To be able to even flash it, you'll need to use my CWM Recovery.
NOTE: I have built and tested this on my Lenovo A3000-H (16 GB version with 3G). Before flashing, please make sure to be on Stock 4.2. Open up a terminal or an ADB shell and type the following:
Code:
getprop ro.product.board
.
Should you get a3000_prc_3gfull, you are good to go. Otherwise, you need to flash the right Stock ROM. The members @kupyxa4444 and @luckasfb have created such a Stock-based ROM, so if you are unable to find one - try to contact one of these two.

CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.4 (KitKat), which is designed to increase performance and reliability over stock Android for your device.

Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/

CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.


NOT WORKING
  • Camera



WORKING
  • GPS
  • WiFi
  • Audio
  • Boots :p
  • SELinux
  • Sensors
  • Vibration
  • Bluetooth
  • HWComposer
  • Offmode charging
  • sw video en/decoding (not hw)
  • Internal and external sdcards
  • RIL/radio (only on SIM1, SIM2 is still broken and therefore disabled, you can re-enable it by setting persist.radio.multisim.config=dsds in your build.prop)



NOTE
Should you ever face any issues (in the recovery or the ROM), provide logs (use Google to find out how to gather those). Additionally, I need to know what ROM you're on, hence you have to mention the build number.​
Hint: "It doesn't work or I get error Status XY" are not bug reports and will be ignored. To keep the thread clean, use DevDB for real bug reports



DOWNLOAD
Instructions:


I have spent a lot of time on this project and I still do - hence, donations would be highly appreciated. :D
My builds can be found here.​



SOURCEs
Device tree (branch cm-11.0)​
Kernel (branch cm-11.0)​
OmniROM Gerrit (topic mt6589)​



CREDITs
  • chrmhoffmann
  • kashifmin
  • Grarak
  • xplodwild
  • Dr-Shadow
  • superdragonpt
  • EnerJon
  • kupyxa4444

XDA:DevDB Information
CyanogenMod 11 for the Lenovo A3000-H, ROM for the Lenovo A3000

Contributors
Olivier
Source Code: https://github.com/lenovo-a3-dev

ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod

Version Information
Status:
Beta

Created 2014-11-26
Last Updated 2015-10-23
Hello bro how can I develop mine special ROM with higher android version for any device + are there is a new version for lenpvo idea tab a3000h+ what courses I need to learn to develop on ROMs please answer and thanks:)
 

WunderWungiel

Member
Dec 14, 2020
41
5
logo-cid.png

PREAMBLE
Here is my CM11 port for the Lenovo A3000-H, 100% unofficial. Contributions are welcome!
To be able to even flash it, you'll need to use my CWM Recovery.
NOTE: I have built and tested this on my Lenovo A3000-H (16 GB version with 3G). Before flashing, please make sure to be on Stock 4.2. Open up a terminal or an ADB shell and type the following:
Code:
getprop ro.product.board
.
Should you get a3000_prc_3gfull, you are good to go. Otherwise, you need to flash the right Stock ROM. The members @kupyxa4444 and @luckasfb have created such a Stock-based ROM, so if you are unable to find one - try to contact one of these two.

CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.4 (KitKat), which is designed to increase performance and reliability over stock Android for your device.

Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/

CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.


NOT WORKING
  • Camera



WORKING
  • GPS
  • WiFi
  • Audio
  • Boots :p
  • SELinux
  • Sensors
  • Vibration
  • Bluetooth
  • HWComposer
  • Offmode charging
  • sw video en/decoding (not hw)
  • Internal and external sdcards
  • RIL/radio (only on SIM1, SIM2 is still broken and therefore disabled, you can re-enable it by setting persist.radio.multisim.config=dsds in your build.prop)



NOTE
Should you ever face any issues (in the recovery or the ROM), provide logs (use Google to find out how to gather those). Additionally, I need to know what ROM you're on, hence you have to mention the build number.​
Hint: "It doesn't work or I get error Status XY" are not bug reports and will be ignored. To keep the thread clean, use DevDB for real bug reports



DOWNLOAD
Instructions:


I have spent a lot of time on this project and I still do - hence, donations would be highly appreciated. :D
My builds can be found here.​



SOURCEs
Device tree (branch cm-11.0)​
Kernel (branch cm-11.0)​
OmniROM Gerrit (topic mt6589)​



CREDITs
  • chrmhoffmann
  • kashifmin
  • Grarak
  • xplodwild
  • Dr-Shadow
  • superdragonpt
  • EnerJon
  • kupyxa4444

XDA:DevDB Information
CyanogenMod 11 for the Lenovo A3000-H, ROM for the Lenovo A3000

Contributors
Olivier
Source Code: https://github.com/lenovo-a3-dev

ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod

Version Information
Status:
Beta

Created 2014-11-26
Last Updated 2015-10-23
Update links!
Re-upload firmware!
Please!!!!!!!
 

Top Liked Posts

  • There are no posts matching your filters.
  • 50
    logo-cid.png

    PREAMBLE
    Here is my CM11 port for the Lenovo A3000-H, 100% unofficial. Contributions are welcome!
    To be able to even flash it, you'll need to use my CWM Recovery.
    NOTE: I have built and tested this on my Lenovo A3000-H (16 GB version with 3G). Before flashing, please make sure to be on Stock 4.2. Open up a terminal or an ADB shell and type the following:
    Code:
    getprop ro.product.board
    .
    Should you get a3000_prc_3gfull, you are good to go. Otherwise, you need to flash the right Stock ROM. The members @kupyxa4444 and @luckasfb have created such a Stock-based ROM, so if you are unable to find one - try to contact one of these two.

    CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.4 (KitKat), which is designed to increase performance and reliability over stock Android for your device.

    Code:
    #include 
    /*
     * Your warranty is now void.
     *
     * I am not responsible for bricked devices, dead SD cards,
     * thermonuclear war, or you getting fired because the alarm app failed. Please
     * do some research if you have any concerns about features included in this ROM
     * before flashing it! YOU are choosing to make these modifications, and if
     * you point the finger at me for messing up your device, I will laugh at you.
     */

    CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.


    NOT WORKING
    • Camera



    WORKING
    • GPS
    • WiFi
    • Audio
    • Boots :p
    • SELinux
    • Sensors
    • Vibration
    • Bluetooth
    • HWComposer
    • Offmode charging
    • sw video en/decoding (not hw)
    • Internal and external sdcards
    • RIL/radio (only on SIM1, SIM2 is still broken and therefore disabled, you can re-enable it by setting persist.radio.multisim.config=dsds in your build.prop)



    NOTE
    Should you ever face any issues (in the recovery or the ROM), provide logs (use Google to find out how to gather those). Additionally, I need to know what ROM you're on, hence you have to mention the build number.
    Hint: "It doesn't work or I get error Status XY" are not bug reports and will be ignored. To keep the thread clean, use DevDB for real bug reports



    DOWNLOAD
    Instructions:
    ordinarystar said:
    Pre-equisites to flash:
    1. Correct Firmware

    1.1 First verify your build version by installing Terminal Emulator from Play Store and then type the following:
    getprop ro.product.board
    if the output is a3000_prc_3gfull, proceed to number 2.

    1.2 if the output is not a3000_prc_3gfull, you will have to first flash another firmware which can be downloaded at:
    https://drive.google.com/file/d/0B5yhZ9sXUH_GMWhCQllhbkZRbUk/edit

    Firmware flashing instructions can be referred here:
    http://forum.xda-developers.com/lenovo-a3000/development/rom-lenovo-ideatab-a3000-h-call-t2441135

    2. My version of CWM installed

    2.1 Now you should install the CWM. You need a rooted device to proceed. Assuming you followed 1.1 and 1.2, your device is already rooted.

    You will need:

    2.1.1 Install mobileuncle MTK Tools from PlayStore or download apk from thread below: http://forum.xda-developers.com/showthread.php?t=2697236

    2.1.2 My CWM, download the zip file and extract the recovery.img. Put the recovery.img in your microSD card.
    http://olivier.hubdroid.com/a3/cwm/cwm_a3-20141220.zip

    2.2 Open up mobileuncle MTK Tools, and select install recovery. It will detect the recovery.img in your microSD card (top in the list).
    Tap on it to install. DO NOT tap on others in the list. Just click OK to install. If you have already downloaded my rom with it placed in your microSD card,
    you may proceed to boot into recovery, or you can press cancel and shut down your device.

    The pre-equisites is now completed!


    Steps to flash:

    1. Download my rom from http://olivier.hubdroid.com/a3/cm-11.0/ - select a preferred release. latest release recommended.

    2. Download gapps from http://forum.xda-developers.com/android/software/gapps-consolidated-gapps-thread-t3064693 - select gapps for kit kat 4.4.4

    2. Boot up recovery: hold power button and volume up button, as it booted up release power button. Use volume up button to browse to "recovery mode" and press volume down to proceed recovery mode.

    3. Do the following:

    2.1 Factory reset
    2.2 Clear cache
    2.3 Clear dalvik cache (Advanced > clear dalvik cache)
    2.4 install from zip, select the rom and install
    2.5 install gapps.
    2.6 when done, reboot to system

    The installation is now completed! :)

    I have spent a lot of time on this project and I still do - hence, donations would be highly appreciated. :D

    My builds can be found here.​



    SOURCEs
    Device tree (branch cm-11.0)
    Kernel (branch cm-11.0)
    OmniROM Gerrit (topic mt6589)​



    CREDITs
    • chrmhoffmann
    • kashifmin
    • Grarak
    • xplodwild
    • Dr-Shadow
    • superdragonpt
    • EnerJon
    • kupyxa4444

    XDA:DevDB Information
    CyanogenMod 11 for the Lenovo A3000-H, ROM for the Lenovo A3000

    Contributors
    Olivier
    Source Code: https://github.com/lenovo-a3-dev

    ROM OS Version: 4.4.x KitKat
    ROM Kernel: Linux 3.4.x
    Based On: CyanogenMod

    Version Information
    Status: Beta

    Created 2014-11-26
    Last Updated 2015-10-23
    17
    Changelog

    BUILD STATUS
    Willing to contribute? Just drop me a PM, send me pull requests on GitHub or join my IRC channel on freenode: #cm-a3!

    Please don't clutter the thread, post your bug reports here instead. Thanks!


    CHANGELOG
    Code:
    [B][U]29/07/2015:[/U][/B]
    [list][*][B][COLOR="Blue"]kernel: [/COLOR][/B]Fixed automatic rotation
    [*][B][COLOR="Blue"]kernel: [/COLOR][/B]Security patches/fixes
    [*][B][COLOR="Blue"]kernel: [/COLOR][/B]Removed scsi_wait_scan module
    [*][/list]
    
    [B][U]02/02/2015:[/U][/B]
    [list][*]Fixed sw encoding and decoding ([B][COLOR="Lime"]YouTube videos etc work now![/COLOR][/B])
    [*][B][COLOR="Blue"]kernel: [/COLOR][/B]Reverted to LZMA compression (for TWRP)
    [*][B][COLOR="Blue"]kernel: [/COLOR][/B]Security patches/fixes
    [*][B][COLOR="Blue"]kernel: [/COLOR][/B]Misc patches for ext4, crypto
    [*][B][COLOR="Blue"]kernel: [/COLOR][/B]Added support for kernel mode NEON
    [*][/list]
    
    [B][U]28/12/2014:[/U][/B]
    [list][*][B][COLOR="Blue"]kernel: [/COLOR][/B]Switched to LZ4 compression (instead of LZMA)
    [*][B][COLOR="Blue"]kernel: [/COLOR][/B]Added BFQ/SIO/FIOPS/ZEN/VR IO Schedulers
    [*][B][COLOR="Blue"]kernel: [/COLOR][/B]Added overall stats for all available cores
    [*]Fixed battery capacity (item in framework-res)
    [*][/list]
    
    [B][U]26/12/2014:[/U][/B]
    [list][*]Switched back to deodexed build on community request
    [*]Removed recovery-from-boot.p (we don't really want this)[/list]
    
    [B][U]20/12/2014:[/U][/B]
    [list][*]Fixed Internal sdcard[/list]
    
    [B][U]17/12/2014:[/U][/B]
    [list][*]Fixed HWComposer
    [*]Odexed build for better performance[/list]
    
    [B][U]16/12/2014:[/U][/B]
    [list][*]Fixed NVRAM
    [*]Fixed Bluetooth
    [*]Fixed RIL[/list]
    
    [B][U]26/11/2014:[/U][/B]
    [list][*]Initial public release.[/list]
    6
    Good news!

    This project is not dead! I have finally managed to fix the sensors entirely (automatic screen rotation now works as it should), thanks to a hint from EnerJon. I'm too lazy to build CM11 right now, so here's a kernel package with the fix, just flash it over a CM11 build without wiping: cm-11.0-kernel-20150728-d7fdca8-a3.zip

    Enjoy :)

    BTW: I use CarbonROM 4.4.4 at the moment (built it just yesterday) - if anyone's interested in it, let me know and I'll share it.
    5
    Good news, Bluetooth and RIL work in the latest EXPERIMENTAL build and every nightly built AFTER the 17th of December! Outgoing as well as ingoing calls work just fine.

    Download: cm-11-20141216-EXPERIMENTAL-a3.zip

    To those who don't have the -H variant like me but others like A3000-F or just A3000: Does the ROM work for you?
    4
    The nightly is building as we speak, some stuff has been fixed - you can now watch videos on YouTube because sw encoding/decoding works! Enjoy!