[ROM][4.4.4]CyanogenMod 11 for Huawei y560-u02[PORT]

[amiro13]

What's working: ril(calls, sms, mobile data for both SIMs), wifi, bluetooth, camera, torch, advanced power menu, hardware rendering, settings, Superuser.
This Cyanogenmod 11 is ported for Huawei Y560-U02, chipset sc7731g, platform sc8830.
This ROM is suitable for daily use.
Copy to microSD card Cyanogenmod 11 ROM. Reboot to recovery (TWRP).
Wipe (without rm-rf): dalvik cache, data, cache. Flash Rom through TWRP. After flashing - factory reset.
Reboot system, setup sim cards. Check APN. If it is not written, write it yourself. Done.
ROM :

https://drive.google.com/file/d/1DblNqOz3aTjLjTwicMsJuJrEWS3b8KtK/view?usp=sharing -
signed_cm11_core33g

Fix wifi_hotspot :

https://drive.google.com/file/d/1RqjwXgd17EpShiNcmdB5CBLIr02vNEIt/view?usp=sharing

Flash wifi_hotspot zip file via TWRP.

TWRP 3.0.2-0_en:

https://drive.google.com/file/d/1vJOnjEBEIkwAqtoAfd6tAL7msnAgEjbn/view?usp=sharing

Open es file explorer , go to device/efs/imei/imeino1 and imeino2 , write your imei numbers.Reboot. Calls and sms will works without this, but better to write your imei numbers.
Gapps:

https://drive.google.com/file/d/0B1MnFzuGjoAPMXZxcktublh0clk/view?usp=sharing

Do it on your own risk.
Injoi! View attachment 5175015

 

[Otaku780]

Gapps for this?

Hello, I managed to flash this properly, thanks a lot.
Any suitable gapps?

 

[amiro13]

Hello, I managed to flash this properly, thanks a lot.
Any suitable gapps?

Welcome
Gapps:

https://drive.google.com/file/d/0B1MnFzuGjoAPMXZxcktublh0clk/view?usp=sharing

 

[Otaku780]

Sims stuck on 2G

For some reasons I can't enable 3G, I've entered my APN manually and edited the imei values to match the old ones, still stuck on 2G.
There used to be an option in the stock rom to choose which SIM gets the 3G and which sticks with 2G, didn't find it here.
Also I can't set the screen brightness to auto, is this happening with everyone or just me?

 

[amiro13]

For some reasons I can't enable 3G ...

In our phones 3G(and lower) works only in first slot for sim card. Second slot uses only 2G(and lower).
In first slot set your sim card, that you need for 3G, and then write APN.
Same to do with your second slot and second sim card. Done.
Auto brightness doesn't work. I don't know why... I never used it, sorry...

 

[Otaku780]

Wifi hotspot?

Hello, thank you for your reply, but I'm yet to be able to enable 3G (2G works fine tho), and I've noticed that I can't enable the Wifi hotspot, as soon as the slider is enabled, it goes back off (pretty much like the 3G thing).

So I'm guessing there is something wrong with my setup? I used TWRP 2.8.7.0 but I don't see how it allows things to work and others not to, can it be the reason? And would flashing it again make it work (with the Gapps you provided, I'm having google store issues).

Thanks in advance.

 

[amiro13]

Hello

Hello. This gapps from thread:[ROM][4.4.4][UNOFFICIAL][SM-G360H] CyanogenMod 11 for Samsung Galaxy Core Prime , there i have ported ROM. I don't like gapps and don't use it.
3G(in first slot) works perfectly for me, why you have issues?.. It's strange...
You can to use TWRP 3.0.2-0 from this thread, but i don't think that it will solve problem...

 

[Otaku780]

Backing up and trying again

I'm thankful for all of your hard work, I am backing up and will flash again (cm_11 and gapps) and will see what happens.
I'm interested if other roms for Samsung Core prime would work for this phone, since you ported the 4.4.4, can the 5.1.1 and / or other versions be ported here as well? I'd like to have the latest update possible for this phone.

 

[amiro13]

I'm interested if other roms for Samsung Core prime would work for this phone, since you ported the 4.4.4, can the 5.1.1 and / or other versions be ported here as well? I'd like to have the latest update possible for this phone.

Hello and thank you!
For 5.1.1 we haven't kernel... When i have ported ROM, also ported boot.img, replaced split_img(zImage, dtb, etc) and have changed some thing in ramdisk. This phone still haven't update to 5.0, that we will can to use boot.img for porting... So, we can't to port any ROM higher 4.4.4
All this is very sad...
Also,it's very important, need to have bigger knowledge and experience, than i have

 

[amiro13]

Deleted

 

[Otaku780]

What's the difference?

Forgot...
I have ported also one cm11 ROM, from here :

https://forum.xda-developers.com/ga...cyanogenmod-11-samsung-galaxy-core-2-t3308697

You can to try it :

https://drive.google.com/file/d/1IgEv7xcrageSnbD1RsiroZUv4g_edyX3/view?usp=sharing - signed_cm11_kanas

For now, i use this ROM.

What's the difference between the signed rom that's available for download and the one called Kanas, the one you said you are using right now ( I am not using it), which one is better, and why so?

Is there a change log?

 

[Otaku780]

Update

What's the difference between the signed rom that's available for download and the one called Kanas, the one you said you are using right now ( I am not using it), which one is better, and why so?

Is there a change log?

I've flashed Kanas on my phone and back to the old one, it's a bit bigger and has an Alarm and calculator by default, but I still have the same hardware issues: No wifi hotspot, no 3G. So I'll stick to the TWRP backup that has all my settings and data for now, appreciate all the help.

 

[amiro13]

I've flashed Kanas on my phone and back to the old one, it's a bit bigger and has an Alarm and calculator by default, but I still have the same hardware issues: No wifi hotspot, no 3G. So I'll stick to the TWRP backup that has all my settings and data for now, appreciate all the help.

Wifi hotspot - fixed.
Good luck

 

[tatai@123]

Hi...I have ported this rom for my device. It also runs the same chipset(ie sc7731). But the camera isn't working. How to fix it. Please help...!!

 

[amiro13]

... But the camera isn't working. How to fix it. Please help...!!

Hi
I have fixed the camera with this guide. Try it.
Good luck

 

[tatai@123]

Hi
I have fixed the camera with this guide. Try it.
Good luck

Thanks but I have already tried that... didn't work for me..

 

[amiro13]

Thanks but I have already tried that... didn't work for me..

Ok...
Try this zip:

https://drive.google.com/file/d/0B1MnFzuGjoAPSVJ4Q3dSMUViSHc/view?usp=sharing mod_AIO

Flash zip file via TWRP.
If this does not work, extract the zip file and replace in the lib folder all libcamera..... .so files with your stock files. This is a zip file for fixing Ril, Camera, Bluetooth ...
In the hw folder, libcamera.sc8830.so and libcamera2.sc8830.so files already is modified .

 

[tatai@123]

Ok...
Try this zip:

https://drive.google.com/file/d/0B1MnFzuGjoAPSVJ4Q3dSMUViSHc/view?usp=sharing mod_AIO

Flash zip file via TWRP.
If this does not work, extract the zip file and replace in the lib folder all libcamera..... .so files with your stock files. This is a zip file for fixing Ril, Camera, Bluetooth ...
In the hw folder, libcamera.sc8830.so and libcamera2.sc8830.so files already is modified .

Thanks a lot....I will surely try that. :good:

 

[amiro13]

Thanks a lot....I will surely try that. :good:

Maybe will to need libcamera.sc8830.so and libcamera2.sc8830.so files from your stock rom. They must to be modified, like written in guide.
Wish you good luck :good:

 

[tatai@123]

Maybe will to need libcamera.sc8830.so and libcamera2.sc8830.so files from your stock rom. They must to be modified, like written in guide.
Wish you good luck :good:

Thanks a lot...it just worked actually I was doing it wrong for the hole time but I did it... thanks man. But few other problems that were not before are now there like
2 sims not working...
Wifi not enabling...
And many more but thankfully I got some fixes for those from romclaims....!!! But again I must say thanks for your help.