[ROM][4.4.4]DN4_2.2(Ditto Note 4) for SGH-i317, i317M, T889, N7105 By the E-Team

[chinkuok]

Add contacts workaround

Anybody found a workaround to add contacts? Since the contacts FC.

 

[dyavrom]

wanam

are Wanam Xposed settings working for anyone? none of them seem to work on my phone.

 

[borijess]

are Wanam Xposed settings working for anyone? none of them seem to work on my phone.

Yes working for me.

Sent from the TermiNOTEr 2!

 

[ramharder]

are Wanam Xposed settings working for anyone? none of them seem to work on my phone.

Working for me.

Sent from my SAMSUNG-SGH-I317 using xda premium

 

[borijess]

Make sure u have root.

Sent from the TermiNOTEr 2!

 

[dyavrom]

Make sure u have root.

Sent from the TermiNOTEr 2!

yeah supersu is working fine for me, definitely have root.

 

[naveenii1991]

are Wanam Xposed settings working for anyone? none of them seem to work on my phone.

before using wanam ...you need to turn it on XPOSED installer

go to modules in xposed instaler and activate

Enjoy

---------- Post added at 02:52 PM ---------- Previous post was at 02:46 PM ----------

Anybody found a workaround to add contacts? Since the contacts FC.

try conatcts+ from android ?

 

[Dr.Pagan]

for anyone T-Mobile users interested, I was on Jedi X20 before, and just flashed this rom, devils kernal and the latest 4.1.2 modem on the t mobile page. I had to change the APN settings a little bit (there was a missing "-" in "T-Mobile", but all seems to be really well now. Pulled 20mpbs on speedtest, and been having absolutely 0 issues so far.

Wich bootloader you flashed??? cuz i flash the one in the first page and get error firmware...had to set it up back with kies

 

[shirazs]

One small issue I had was that Haptic Feedback was not working (vibrate when pressing back or menu buttons). It didn't work for 2 days but when I woke up today, it magically started to work

I also implemented the I317M kernel and wifi also works now.

Battery seems to drain faster than usual (went to sleep at 99% and woke up 7hrs later at 85%) but it might be due to the fact that I switched kernels yesterday.

Quick Q: When you say you implemented the i317M kernel, do you mean from the stock 4.3 rom posted on sammobile. Reason why I ask is that I have installed the Rogers 4.3 i317m stock from sammobile and rooted. Was wondering if I could just flash this rom on top and have wifi working or do I need to also flash the modem?

Thanks!

 

[dyavrom]

before using wanam ...you need to turn it on XPOSED installer

go to modules in xposed instaler and activate

Enjoy

---------- Post added at 02:52 PM ---------- Previous post was at 02:46 PM ----------




try conatcts+ from android ?

did all of that haha. turned it on, updated wanam, rebooted, everything. ill keep on testing and post my results once i figure it out.

thanks

 

[Bajanman]

Damn @solohendo :thumbup:
Guess I'm late to the party here..:sly: Nice to see you came out with your Rom like we talked about. Looking good brotha..
I'm going to have to give this a go, and see how she runs. Lol
Thanx for you contribution to the community.:thumbup::beer:

Sent from my SAMSUNG-SGH-I317 using Tapatalk

 

[haml]

So this question is for anyone. How do you install/update SU binary. I've used Odin all day today to reflash this rom for 1 reason or another and as a couple people mentioned earlier, SU is empty. Do I use odin but click bootloader instead of PDA to install 4.3 boot loader? And if so do I use the same .tar file from this post (pramtz). Do I just download a new SU from playstore or blackmarket alpha. This is where i'm stuck. I came from Beanstalk 4.3 to DN3. My issue's for reflashing were no wifi (used odin to fix), then some error code that said ".com, phone shut down" (something like that) after flashing and installing the add on apps (in this post) altogether (still no SU). So I reflashed to fix and didn't install the "add on apps" (still no SU). Hopefully this wasn't to confusing.

---------- Post added at 11:56 AM ---------- Previous post was at 11:15 AM ----------

So this question is for anyone. How do you install/update SU binary. I've used Odin all day today to reflash this rom for 1 reason or another and as a couple people mentioned earlier, SU is empty. Do I use odin but click bootloader instead of PDA to install 4.3 boot loader? And if so do I use the same .tar file from this post (pramtz). Do I just download a new SU from playstore or blackmarket alpha. This is where i'm stuck. I came from Beanstalk 4.3 to DN3. My issue's for reflashing were no wifi (used odin to fix), then some error code that said ".com, phone shut down" (something like that) after flashing and installing the add on apps (in this post) altogether (still no SU). So I reflashed to fix and didn't install the "add on apps" (still no SU). Hopefully this wasn't to confusing.

The phone gets hot in standby and the battery is dyeing fast.

 

[FromToronto]

did all of that haha. turned it on, updated wanam, rebooted, everything. ill keep on testing and post my results once i figure it out.

thanks

In Xposed, did you go into "Framework" and then "Install/Update" before doing all that? That's how I got mine working.

---------- Post added at 03:47 PM ---------- Previous post was at 03:39 PM ----------

Quick Q: When you say you implemented the i317M kernel, do you mean from the stock 4.3 rom posted on sammobile. Reason why I ask is that I have installed the Rogers 4.3 i317m stock from sammobile and rooted. Was wondering if I could just flash this rom on top and have wifi working or do I need to also flash the modem?

Thanks!

For me, it was the modem that screwed up my initial install - I didn't get signal and my baseband showed up as "unknown". So I suspect even if you're coming from a stock rom and rooted, you'd have to download the Rogers modem and replace it if you don't have signal.

I think in all cases, I317M wifi will not work with this ROM until you replace the kernel, so that's a must-do.

 

[md1008]

I am getting a lot of gaaps fc as well as some android. Process.media force close. I did do a full whipe on latest CWM. Should be on 4.3 bl as I flashed the 4.3 leak.

Sent from my GT-N8013 using XDA Premium 4 mobile app

 

[haml]

Let me re-word this:
I was on 4.3 beanstalk and used Odin to root my At&t I317.
Decided to give this one a try and followed the directions:
-------------
Download this bootloader
http://d-h.st/eCi
Extract just the .tar file.
Open Odin
Put your device in download mode by holding (volume down+home+power) buttons.
Click the pda slot and insert the.tar file you just extracted.
Start.
Step 2.
Dowload rom DN3 V1.0-I317
Mega link
- Mirror
Go into recovery on your phone.
If you don't have a custom recovery, (playstore/goo manager/menu/install open recovery).
Do a factory data reset/wipe dalvik and cache/wipe system.
Flash the rom DN3 V1.0-I317
------------------

After flashing I went to SU and opened it but received a message saying this:

"There is no SU binary installed and SuperSU cannot install it. This is a problem!
If you just upgraded to Android 4.3, you need to manually re-root -
consult the relevant forums for your device!"


------------------
Also, the battery is dropping pretty fast. These are the time photo's from 3:01 - 3:07 pm of just on standby. Here's pics of screen shots:



Here's from 3:07 - 3:12 while down loading photobucket app (30mb):


_________________

This is where i'm at. Any suggestion, help or guidance.
Thanks

 

[420techcloud]

So this question is for anyone. How do you install/update SU binary. I've used Odin all day today to reflash this rom for 1 reason or another and as a couple people mentioned earlier, SU is empty. Do I use odin but click bootloader instead of PDA to install 4.3 boot loader? And if so do I use the same .tar file from this post (pramtz). Do I just download a new SU from playstore or blackmarket alpha. This is where i'm stuck. I came from Beanstalk 4.3 to DN3. My issue's for reflashing were no wifi (used odin to fix), then some error code that said ".com, phone shut down" (something like that) after flashing and installing the add on apps (in this post) altogether (still no SU). So I reflashed to fix and didn't install the "add on apps" (still no SU). Hopefully this wasn't to confusing.

---------- Post added at 11:56 AM ---------- Previous post was at 11:15 AM ----------



The phone gets hot in standby and the battery is dyeing fast.

All files are on my site
http://420apk.tk new supersu zip and apk

Sent from my SAMSUNG-SGH-I317 using Tapatalk

 

[AsfaltSame]

Let me re-word this:
I was on 4.3 beanstalk and used Odin to root my At&t I317.
Decided to give this one a try and followed the directions:
-------------
Download this bootloader
http://d-h.st/eCi
Extract just the .tar file.
Open Odin
Put your device in download mode by holding (volume down+home+power) buttons.
Click the pda slot and insert the.tar file you just extracted.
Start.
Step 2.
Dowload rom DN3 V1.0-I317
Mega link
- Mirror
Go into recovery on your phone.
If you don't have a custom recovery, (playstore/goo manager/menu/install open recovery).
Do a factory data reset/wipe dalvik and cache/wipe system.
Flash the rom DN3 V1.0-I317
------------------

After flashing I went to SU and opened it but received a message saying this:

"There is no SU binary installed and SuperSU cannot install it. This is a problem!
If you just upgraded to Android 4.3, you need to manually re-root -
consult the relevant forums for your device!"


------------------
Also, the battery is dropping pretty fast. These are the time photo's from 3:01 - 3:07 pm of just on standby. Here's pics of screen shots:



Here's from 3:07 - 3:12 while down loading photobucket app (30mb):


_________________

This is where i'm at. Any suggestion, help or guidance.
Thanks

Take a look at post #126

 

[DelphinusMinor]

I have a specific question.

I noticed there are two devil kernels you can download.

I grabbed this one;

Devil2-1.5.0-t0lte-DUAL-20131124

Am I correct in assuming I will have no issues flashing that kernel with this rom?

 

[rickleasa]

Nice rom but killed my battery used to go all day now after 5 hrs 25 % left

 

[adam5150]

If your griping about battery it's something you have done. Running stock kernel couple of days in and mine runs like a charm and great battery life.

Sent from my SAMSUNG-SGH-I317 using Tapatalk