[ROM][4.4.4]DN4_2.2(Ditto Note 4) for SGH-i317, i317M, T889, N7105 By the E-Team

DeathEvil

Senior Member
Mar 6, 2011
392
72
0
there is something certainly wrong with this latest update. installing on top of 1.0 worked, but only until the next reboot. I must have tried 20 different combinations with wiping and non wiping. Awaiting a proper release:)
 

inningsdefeat500

Senior Member
Oct 30, 2010
642
35
58
Vancouver
Failed Miserably so far

Could somoene confirm/correct/provide correct steps

Rogers 1317M with Stock Rom and Latest TWRP and latest 3.1b download
Apply Zip > Aroma Installer > ATT Modem and Kernel
Rest all defaullt
At last step, Aroma gets stuck on NEXT ( the option where it was Save Logs ) but it says if Stuck then press Power to reboot
So I do and then Stuck on Immediate Note 2 logo
Now if I try and goto TWRP and wipe cache/dalvk and reboot, then it passes the above logo but then gets stuck on Samsung Logo

Thats it, I cannot get around this
 

519FlyBoy

Senior Member
Dec 8, 2013
112
94
0
Brantford
Failed Miserably so far

Could somoene confirm/correct/provide correct steps

Rogers 1317M with Stock Rom and Latest TWRP and latest 3.1b download
Apply Zip > Aroma Installer > ATT Modem and Kernel
Rest all defaullt
At last step, Aroma gets stuck on NEXT ( the option where it was Save Logs ) but it says if Stuck then press Power to reboot
So I do and then Stuck on Immediate Note 2 logo
Now if I try and goto TWRP and wipe cache/dalvk and reboot, then it passes the above logo but then gets stuck on Samsung Logo

Thats it, I cannot get around this
I also have the Rogers i317m and used the same steps and had no problems except I came from DN3 1.0 so maybe that made the difference.. Also, u chose the i317m kernel and modem right? ATT is i317, Rogers Is i317m.. Correct me if I'm wrong? :)
 

thugmafia

Senior Member
Jul 11, 2009
445
30
0
i317
the fixed that was uploaded in the thread by someone other than the E-Team
phillz recovery= clean install(meaning wipe in recovery be4 installing ROM and not on top of any previous Rom and chose everything for my phone i317 no Devil kernel)
Data speed the same as 4G LTE or almost the same
Almost all of the N3 features works thumbs-up
Not working
tethering= wont turn on( a most for me)
pagebuddy
Screen Mirroring
Air jump
i think that all i find so far (Just one Question since Solo v1.0 had wifi for us i317 without Devil kernel can the TEAM use that as a BASE?)
MANY MANY THANKS TO THE TEAM well deserve a BEER

---------- Post added at 09:23 AM ---------- Previous post was at 09:22 AM ----------

i317
the fixed that was uploaded in the thread by someone other than the E-Team
phillz recovery= clean install(meaning wipe in recovery be4 installing ROM and not on top of any previous Rom and chose everything for my phone i317 no Devil kernel)
Data speed the same as 4G LTE or almost the same
Almost all of the N3 features works thumbs-up
Not working
tethering= wont turn on( a most for me)
pagebuddy
Screen Mirroring
Air jump
i think that all i find so far (Just one Question since Solo v1.0 had wifi for us i317 without Devil kernel can the TEAM use that as a BASE?)
MANY MANY THANKS TO THE TEAM well deserve a BEER:good::good:
 

inningsdefeat500

Senior Member
Oct 30, 2010
642
35
58
Vancouver
I also have the Rogers i317m and used the same steps and had no problems except I came from DN3 1.0 so maybe that made the difference.. Also, u chose the i317m kernel and modem right? ATT is i317, Rogers Is i317m.. Correct me if I'm wrong? :)
OP said pick ATT only, I thought it was due to some issues, so I will try it again

tax for ur reply
 

figyu

Senior Member
Dec 5, 2013
74
8
0
Is there anyone to explain how to flash DN3 v3.1b into my Note 2 (I317, ATT)?

It's cold today.
I want to use Note3 features in my Note 2, so I read many threads and comments until now.
However, I actually have no idea because there are many cases or directions.
Is there anyone to explain how to flash DN3 v3.1b into my Note 2 in detail?
------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Galaxy Note 2 (AT&T, SGH-I317, Jelly Bean 4.1.2, I317UCAMH3) - pure version which means no rooting, no custom recovery.
------------------------------------------------------------------------------------------------------------------------------------------------------------------------
1. Rooting
2. Flash custom recovery (CWM, TWRP, or Philiz)
3. Flash 4.3 bootloader
4.
5.

I hope that you can post your successful experiences.
 

519FlyBoy

Senior Member
Dec 8, 2013
112
94
0
Brantford
OP said pick ATT only, I thought it was due to some issues, so I will try it again

tax for ur reply
Noo you must have clicked the "click to show" flashing instructions for the ATT i317 rom, right below it is the instructions for Rogers i317m and it specifically says to choose the i317m kernel and modem.. There's your issue haha, let me know if it works now.. Cheers
 

white8785

Member
Jun 18, 2010
47
7
0
It's cold today.
I want to use Note3 features in my Note 2, so I read many threads and comments until now.
However, I actually have no idea because there are many cases or directions.
Is there anyone to explain how to flash DN3 v3.1b into my Note 2 in detail?
------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Galaxy Note 2 (AT&T, SGH-I317, Jelly Bean 4.1.2, I317UCAMH3) - pure version which means no rooting, no custom recovery.
------------------------------------------------------------------------------------------------------------------------------------------------------------------------
1. Rooting
2. Flash custom recovery (CWM, TWRP, or Philiz)
3. Flash 4.3 bootloader
4.
5.

I hope that you can post your successful experiences.
i came from the same setup and here's my process...

1. one click 4.3 leaked att flash
2. flashed philz recovery
3. flashed DN3 v1.0
4. rebooted
5. flashed DN3 v3.1b
6. rebooted a couple times to ensure everything was good
7. flashed devils 2.0 to get wifi working (albeit with poor signal (not sure if others have this problem))

so far, i haven't found anything to not work properly (aside from wifi which i mentioned), and i'm seeing 13hrs on a 9300mah battery (not good, but i'm only through one cycle so far). i'm going to run with this setup until these guys have more time to iron out the bugs while i research the wifi issues (cause that is happening on any rom i load right now)
 

cob94440

Senior Member
Sep 7, 2010
182
20
0
Hi everyone,
I'm on n7105 mk5 stock.

I try to flash this and i'm stuck at samsung logo.

I root my n7105 then install latest cwm touch then the rom. i follow the steps in op but it stuck at this samsung logo.

Knox is installed is this a problem?

Thanks for your help
 

roberton

Member
May 13, 2007
32
8
0
i317
the fixed that was uploaded in the thread by someone other than the E-Team
phillz recovery= clean install(meaning wipe in recovery be4 installing ROM and not on top of any previous Rom and chose everything for my phone i317 no Devil kernel)
Data speed the same as 4G LTE or almost the same
Almost all of the N3 features works thumbs-up
Not working
tethering= wont turn on( a most for me)
pagebuddy
Screen Mirroring
Air jump
i think that all i find so far (Just one Question since Solo v1.0 had wifi for us i317 without Devil kernel can the TEAM use that as a BASE?)
MANY MANY THANKS TO THE TEAM well deserve a BEER

---------- Post added at 09:23 AM ---------- Previous post was at 09:22 AM ----------

i317
the fixed that was uploaded in the thread by someone other than the E-Team
phillz recovery= clean install(meaning wipe in recovery be4 installing ROM and not on top of any previous Rom and chose everything for my phone i317 no Devil kernel)
Data speed the same as 4G LTE or almost the same
Almost all of the N3 features works thumbs-up
Not working
tethering= wont turn on( a most for me)
pagebuddy
Screen Mirroring
Air jump
i think that all i find so far (Just one Question since Solo v1.0 had wifi for us i317 without Devil kernel can the TEAM use that as a BASE?)
MANY MANY THANKS TO THE TEAM well deserve a BEER:good::good:
maybe this can help on screen mirroring http://forum.xda-developers.com/showthread.php?t=2542509&page=1
 

deorext

Senior Member
Apr 25, 2006
64
0
0
K.L
Flash philz recovery and try clean flashing it.

Sent from my GT-N7105 using XDA Premium 4 mobile app
Hi everyone,
I'm on n7105 mk5 stock.

I try to flash this and i'm stuck at samsung logo.

I root my n7105 then install latest cwm touch then the rom. i follow the steps in op but it stuck at this samsung logo.

Knox is installed is this a problem?

Thanks for your help
i having the same problem with yours...

i running on n7105 MK3...

how to solve this?
 

Bajanman

Retired Forum Moderator
Jun 17, 2009
8,898
9,576
0
Los Angeles Ca.
The Google drive link in the OP is a new one.
We just added a mediafire link.
Please check that the md5 is correct once you finish the download.

Sent from my GT-N7100 using Tapatalk
As @titooo7 stated above about the mediafire link. I would see why a lot of you would miss it in the OP. Because it's not highlighted. Or the link just don't stand out.

It's just not a clickable link...:sly:

Well here's the E-Teams NEW link from the OP for all those that want it!
http://www.mediafire.com/?qbqdqwrpp0o1kyr

I just pulled it out and check to see if it was working!:thumbup::D
Me 3¢®™ short of a nickel...:p:D

Sent from my SAMSUNG-SGH-I317 using Tapatalk
 
Last edited:
  • Like
Reactions: softballjunkee13

nutathis

Senior Member
Apr 16, 2006
159
10
0
Followed instructions for ATT i317 and am stuck on Note II logo. Anyone know how to get me back to the CWM boot? Each time I pull the battery it goes back to the Note II screen and I've tried holding the power and vol down button but nothing.

Thanks
 

thekenderman

Senior Member
Feb 28, 2011
200
42
0
Bowmanville
Failed Miserably so far

Could somoene confirm/correct/provide correct steps

Rogers 1317M with Stock Rom and Latest TWRP and latest 3.1b download
Apply Zip > Aroma Installer > ATT Modem and Kernel
Rest all defaullt
At last step, Aroma gets stuck on NEXT ( the option where it was Save Logs ) but it says if Stuck then press Power to reboot
So I do and then Stuck on Immediate Note 2 logo
Now if I try and goto TWRP and wipe cache/dalvk and reboot, then it passes the above logo but then gets stuck on Samsung Logo

Thats it, I cannot get around this
Exactly my issue

Sent from my SGH-I317M using Tapatalk
 

jivin_hipcat

Senior Member
Jan 5, 2013
186
100
0
Followed instructions for ATT i317 and am stuck on Note II logo. Anyone know how to get me back to the CWM boot? Each time I pull the battery it goes back to the Note II screen and I've tried holding the power and vol down button but nothing.

Thanks
Power + volume up + home

Sent from my GT-N7105 using xda app-developers app
 
  • Like
Reactions: sapps

nuwayman

Senior Member
Aug 21, 2006
749
103
0
portland, OR
Followed instructions for ATT i317 and am stuck on Note II logo. Anyone know how to get me back to the CWM boot? Each time I pull the battery it goes back to the Note II screen and I've tried holding the power and vol down button but nothing.

Thanks
It's volume down home button and power button.

Sent from my GT-N7105 using XDA Premium 4 mobile app
 
  • Like
Reactions: rotule