Note 4 Elite Ultimate ROM for Samsung Galaxy S3
GT-I9305
By Qasim799
Disclaimer
Introduction
Hey Guys! After alot of hard work,Today I'm gonna present you my Note 4 Elite ultimate ROM which is a full port of note 4 and material design of lollipop touchwiz.
Features
Lollipop material design!!!
NOTE 4 LAUCHER
NOTE 4 framework
note 4 music player
note 4 settings
note 4 lockscreen
note 4 ui
some material lollipop ui.
note 4 sounds and bootanimation
note 4 Ultra Power Saving Mode
smart stay,smart pause ,smart scroll
everything is note 4!!!
Aroma installer.
known Bugs
No bugs at all! if you get any then,go bellow for fixes and patches.
Screenshots











Installation instructions
philz touch recovery is compulsory.here's compiled by Pheoxy https://www.androidfilehost.com/?fid=95864024717071908
Boot to recovery (Volume Up + Power when phone totally off).
Do a Factory reset,choose wipe to install a new ROM in philz recovery.otherwise you will face systemui fc.
Install ZIP
Select the ZIP file
Follow Aroma Installer
Wait and reboot.
On first boot you will get system ui fc please flash fix.zip from the link given bellow in patches and fixes section.
Download
https://mega.co.nz/#!6Q5HlLbC!YxbikJfZTunsw-Fb1hb5_jpFqo3zZrnJBe1pvXqP8FQ
Fixes and Patches
For systemUI on first boot flash this in recovery.
http://forum.xda-developers.com/attachment.php?attachmentid=3176789&d=1424529397
For Internet browser fc flash this zip thanks to @maho_66
http://forum.xda-developers.com/attachment.php?attachmentid=3170400&d=1424189304
if you get camera issue flash this.
http://forum.xda-developers.com/attachment.php?attachmentid=3165225&d=1423922263
Stock kernel for the camera workaround:
http://forum.xda-developers.com/attachment.php?attachmentid=3165389&d=1423931135
1. Enter recovery and flash i9305 4.4.x stock kernel
2. Boot into the rom, note: wifi won't work and internal memory and SD card may not be accessible, this is normal
3. Try to start the camera app, it will give you a memory card error but you will see that it's working
4. Reboot into recovery, flash back AGNi 4.4.x kernel and boot back into the rom
5. Now you should have a working camera.
Thanks To
XDA:DevDB Information
Note 4 elite ultimate, ROM for the Samsung Galaxy S III I9300
Contributors
qasim799, blekota, psndna88
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: none
Based On: Stock
XDA:DevDB Information
NOTE 4 ELITE ULTIMATE MATERIAL EVOLUTION, ROM for the Samsung Galaxy S III I9300
Contributors
qasim799, blekota, maho_66
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Based On: STOCK
Version Information
Status: Stable
Current Stable Version: V1.0
Stable Release Date: 2015-02-21
Created 2015-02-20
Last Updated 2015-07-27
GT-I9305
By Qasim799
Disclaimer
Code:
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed.
Please do some research if you have any concerns about features included
in this ROM before flashing it!
YOU are choosing to make these modifications, and if you point the finger
at me for messing up your device, I will laugh at you.
Hey Guys! After alot of hard work,Today I'm gonna present you my Note 4 Elite ultimate ROM which is a full port of note 4 and material design of lollipop touchwiz.
Features
Lollipop material design!!!
NOTE 4 LAUCHER
NOTE 4 framework
note 4 music player
note 4 settings
note 4 lockscreen
note 4 ui
some material lollipop ui.
note 4 sounds and bootanimation
note 4 Ultra Power Saving Mode
smart stay,smart pause ,smart scroll
everything is note 4!!!
Aroma installer.
known Bugs
No bugs at all! if you get any then,go bellow for fixes and patches.
Screenshots











Installation instructions
philz touch recovery is compulsory.here's compiled by Pheoxy https://www.androidfilehost.com/?fid=95864024717071908
Boot to recovery (Volume Up + Power when phone totally off).
Do a Factory reset,choose wipe to install a new ROM in philz recovery.otherwise you will face systemui fc.
Install ZIP
Select the ZIP file
Follow Aroma Installer
Wait and reboot.
On first boot you will get system ui fc please flash fix.zip from the link given bellow in patches and fixes section.
Download
https://mega.co.nz/#!6Q5HlLbC!YxbikJfZTunsw-Fb1hb5_jpFqo3zZrnJBe1pvXqP8FQ
Fixes and Patches
For systemUI on first boot flash this in recovery.
http://forum.xda-developers.com/attachment.php?attachmentid=3176789&d=1424529397
For Internet browser fc flash this zip thanks to @maho_66
http://forum.xda-developers.com/attachment.php?attachmentid=3170400&d=1424189304
if you get camera issue flash this.
http://forum.xda-developers.com/attachment.php?attachmentid=3165225&d=1423922263
Stock kernel for the camera workaround:
http://forum.xda-developers.com/attachment.php?attachmentid=3165389&d=1423931135
1. Enter recovery and flash i9305 4.4.x stock kernel
2. Boot into the rom, note: wifi won't work and internal memory and SD card may not be accessible, this is normal
3. Try to start the camera app, it will give you a memory card error but you will see that it's working
4. Reboot into recovery, flash back AGNi 4.4.x kernel and boot back into the rom
5. Now you should have a working camera.
Thanks To
Code:
@belkota for giving me permissions.
@psndna88 for his awsome kernel.
@bulldog78ts for his awsome rom.
@maho_66
Note 4 elite ultimate, ROM for the Samsung Galaxy S III I9300
Contributors
qasim799, blekota, psndna88
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: none
Based On: Stock
XDA:DevDB Information
NOTE 4 ELITE ULTIMATE MATERIAL EVOLUTION, ROM for the Samsung Galaxy S III I9300
Contributors
qasim799, blekota, maho_66
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Based On: STOCK
Version Information
Status: Stable
Current Stable Version: V1.0
Stable Release Date: 2015-02-21
Created 2015-02-20
Last Updated 2015-07-27
Last edited: