[ROM][5.0.2] Unofficial CyanogenMOD 12 for MK808B-Plus - WeTek Gift

[minonano]

got my wifi chip no without opening the box
go to esfilexplorer
open device
open system
open etc
open wifi
open 40181
u will get ur wifi chip
mine is written as
ap6210_nvram.txt
hope this helps now flashing lolipop rom
no opening the box or anything
110k4 also has support fr
ap6181_nvram
ap6330_nvram
but no support for
ap6212_nvram
so the people shipped wt firmware 111k4
shld hav the latest ap6212 chipset as 110k dosent seem to support it
can u pls check ur firmware wt the support cause i am not on the latest
it will be helpful to all

Please see the attached pic, as it is showing 3 chips, which one is on my device? or which *.txt to open to see the chip?
Thanks

 

[ashwaa]

Please see the attached pic, as it is showing 3 chips, which one is on my device? or which *.txt to open to see the chip?
Thanks

pls specify ur model is it mk808b plus than ur chipset is ap6210
this cm rom will work fr u flawlessly

 

[minonano]

Model is mk809plus same as808b but with 2.4/5 dual band..

 

[jeanluc13]

On July I bought an mk808b plus from Gearbest. It has firmare version 111k4. I installed a terminal emulator, and using dmesg command I can see that the wifi driver loaded is for AP6212 device.
Thi rom has drivers for following devices:
AP6181, AP6210, AP6212, AP6330.

So, does this CM12 work with AP6212?

 

[MedTaha4Ever]

First install instructions


* Once the device has booted to recovery perform a factory reset and flash the ROM's zip for first followed by the GAPPS zip.
* Reboot and enjoy CyanogenMOD brought to you by WeTek.

Do I need a keyboard to navigate on cmw ?? cause I don't have one

 

[fantoms]

Hello,
I have also installed this rom and WiFi does not work.
Is there any chance patch to be released to fix this issue?

 

[cheesecaked]

link in the OP is broken

 

[vn800art]

@fantoms : Try this and report back: http://freaktab.com/forum/tv-player...oms-to-work-with-newer-wifi-chips-mk808b-plus

As far as I understand you have a stick with WiFi chip ap6212, for example stock rom 109k4 cannot be used (WiFi and bt broken).

Pls report back your experience!

Alessandro

 

[fantoms]

I have already installed MK808B Plus_112k4_20150807 (sorry cant post links, blog.geekbuying.com/index.php/2015/10/29/rom-download112k4-lastest-firmware-for-mk808b-plus-amlogic-m805-quad-core-tv-stick)
Everything is working now, but I wanted CyanogenMOD 12.

 

[vn800art]

Look at the link I posted. I asked Prajister more help to flash Levvy GoogleTv Rom which is based on Cyanogen Rom

Alessandro

 

[tommybc]

I'm trying to install but in cwm installing cm its stuck on detected filesystem ext 4 for dev/block/system

 

[tommybc]

Any USB mirror image version?

 

[d0tcould]

i just got a mk808b plus which i bought from gearbest. i followed the instructions but unfortunately i am experiencing the wifi issue too. i just cant seem to get it to work :<
i have also trieda usb wifi adapter but that isnt working either.

my stick came installed with build number 112k4 and kernal version 3.10.33
i used the burning tool to get it to version 109k4 and then flashed cm12 etc via recovery

has anyone who has purchased this stick recently been able to fix the wifi issue?
thanks

 

[vn800art]

You need to get WiFi and BT drivers for your chip and add them in the right folders in root/system, I haven't got there, unfortunately!

Inviato dal mio Nexus 5 utilizzando Tapatalk

 

[d0tcould]

You need to get WiFi and BT drivers for your chip and add them in the right folders in root/system, I haven't got there, unfortunately!

Inviato dal mio Nexus 5 utilizzando Tapatalk

Ok cool thanks for your help! Fingers crossed I can find them!

 

[d0tcould]

I've reverted back to the rom the stick came with (112k4) and wifi is working fine
I'm wondering if I can just copy the wifi drivers from this rom and overwrite the wifi drivers on cm12?
If so could someone please tell me how to do this
This is my first android stick so I'm quite an android novice, therefore I have no idea what directory the drivers are in etc.
thanks!

 

[ThePublicForce]

...

Hey,

after your last reply some time has passed, so is there any progress (especially) regarding DRM support?
And did you get the Miracast app working (less important).

Thank you.

 

[nasty000]

EC-MK808B Plus - Realtek 8723 WiFi & Bluetooth

Hey everyone. First of all, a huge thanks to Christian Troy for this rom. So much smoother and faster than any other rom I found for my device.

As you can see in the title, I have the EC-MK808B Plus version with Realtek 8723 WiFi & Bluetooth like a few other people in this thread, and because of that I can't get my Wifi and Bluetooth to work. So far I've tried extracting the 8723bs.ko kernel module from a working rom, and using insmod to load it into this rom, but that just freezes my device. I guess because its a kernel module for 4.4.2 and this is 5.0.2. But the kernel versions on the working rom and this rom are the same (3.10.33), so with my layman's logic, I though it could work.

I've also tried downloading this rom http://chinagadgetsreviews.com/download-android-lollipop-5-1-1-stock-firmware-for-csa91-tv-box.html, extracting and unpacking system.img to look for a module there, seeing as it is a Lollipop rom. (Other version, but thought it was worth a try), but unfortunately, I couldn't find it.

As anyone had any better luck than me? Or can anyone with more knowledge point me in the right direction to aquire/compile a working rtl8723bs module for this rom?

 

[aselasanjeewab]

Is it support for MXQ S805 Android TV box

Release notes

Hello guys, I guess most of you have noticed that, right now, I'm just working on WeTek products (and couldn't be anything different since I really like doing this kind of stuff for them).
To prove you that WeTek Electronics cares about community and since we don't have any AMLogic S805 product, we decided to make users of MK808B-Plus happy by releasing a CyanogenMOD 12 build for them.

Userspace and kernel code has been upgraded to Amlogic's Lollipop SDK dated 2015-01-31 (they removed Widevine DRM support in Lollipop so apps like Play Movies won't be able to stream, I'm sorry).



First install instructions

* As really first thing I suggest you to flash stock "109k4" rom using "AMLogic Burning Tools" in case you're not already using that ROM or Finless' 1.1.
* Grab CWM from here, unzip it and copy "recovery.img" file to a MicroSD.
* Power off your device and unplug the AC power cord.
* Get the latest available ROM and GAPPS version from the links below and copy them to a MicroSD card.
* Now insert the MicroSD card in your HDMI stick.
* Plug the AC power cord while you keep pressed the little reset pinhole (located on the top left of the device) until you see the "Google TV" logo.
* Once the device has booted to recovery perform a factory reset and flash the ROM's zip for first followed by the GAPPS zip.
* Reboot and enjoy CyanogenMOD brought to you by WeTek.



Update instructions

* Get the latest available ROM and GAPPS version from the links below and copy them to a MicroSD card.
* Now insert the MicroSD card in your HDMI stick.
* Enable "Developer options" following this tutorial and from it enable the "Reboot to recovery" option.
* Bring up power menu by keeping F5 (if you have a keyboard plugged in) and select "Reboot -> recovery", otherwise use the pinhole method adove.
* Once the device has booted to recovery flash the ROM's zip for first followed by the GAPPS zip.
* Reboot and enjoy your updated CyanogenMOD.



Downloads

* ROM 2015-04-19
* GAPPS 2015-01-07 (LITE)

 

[siralsmooth]

Hey everyone. First of all, a huge thanks to Christian Troy for this rom. So much smoother and faster than any other rom I found for my device.

As you can see in the title, I have the EC-MK808B Plus version with Realtek 8723 WiFi & Bluetooth like a few other people in this thread, and because of that I can't get my Wifi and Bluetooth to work. So far I've tried extracting the 8723bs.ko kernel module from a working rom, and using insmod to load it into this rom, but that just freezes my device. I guess because its a kernel module for 4.4.2 and this is 5.0.2. But the kernel versions on the working rom and this rom are the same (3.10.33), so with my layman's logic, I though it could work.

I've also tried downloading this rom http://chinagadgetsreviews.com/download-android-lollipop-5-1-1-stock-firmware-for-csa91-tv-box.html, extracting and unpacking system.img to look for a module there, seeing as it is a Lollipop rom. (Other version, but thought it was worth a try), but unfortunately, I couldn't find it.

As anyone had any better luck than me? Or can anyone with more knowledge point me in the right direction to aquire/compile a working rtl8723bs module for this rom?

I tried that stuff a while back with no success either. For me, my intended use was my carpc setup. The nail in the coffin was the lack of a HID touch mouse driver that has been present in every other stick pc I've used. It tracks, but won't accept touches as clicks. This ROM was screwed from the beginning. Who knows just what else was butchered and hacked to make it work. But stripping out basic code killed it for me. I even offered to pay someone to get a build going without success.

Sent from my XT1575 using XDA Premium HD app