[ROM][5.1 CM-12.1][Cyanogenmod 12.1 Unofficial][LMY48G][13/07/15]

[Namidairo]

#include 
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/

NVFlash backups, please do them before flashing anything below otherwise you will **** out of luck if you brick

Download:
cm-12-20150219-UNOFFICIAL-tf201.zip
cm-12-20150321-UNOFFICIAL-tf201.zip
cm-12.1-20150405-UNOFFICIAL-tf201.zip
cm-12.1-20150713-UNOFFICIAL-tf201.zip

Recovery:

recovery.img
Note that the touch buttons are really close together and there's no confirmation before you want to flash a zip sooooo... use the power keys if you are extra scared/careful.

In addition, the script output is impossible to see, which is kinda problematic.

XDA:DevDB Information
Cyanogenmod 12.1 Unofficial, ROM for the Asus Eee Pad Transformer Prime

Contributors
Namidairo, Androidroot, CyanogenMod
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.1.x
Based On: CyanogenMod

Version Information
Status: Testing

Created 2015-02-15
Last Updated 2015-04-05

 

[suhiSLO]

Hi. I see no download section. So do I use the current recovery or should I wait? Using twrp with f2fs.

 

[Howell]

Hi,
What's the differences with official cm12 for tf300t?
I tested tf300 official and had lots of problems and I would prefer not to have them again ?

 

[atoyu]

hi, please upload f2fs recovery if this rom support f2fs.thank you!

 

[suhiSLO]

Edit: all is good. I'm back on track.

Ahhhh. I used the one from cm11 topic. Big mistake. Now I'm getting android service icon flashing screen. Reboot is the same, can't access fastboot or bootloader or recovery, tablet is recognized by pc. Attached the picture of what is on my screen if anyone has an idea.

 

[suhiSLO]

Just curious. Installed cm recovery, the rom and gapps (the smallest ones) and now waiting at Asus bootlogo. How long does the first boot take?

 

[GoldenAvatar]

I have the same problem. My TF201 is stuck at the bootscreen with the Asus-logo.
What did I do:
- wiped cache
- factory reset
- flashed recovery.img from post #1
- flashed firmware from post #1
- reboot and stuck at Asus-logo

I can still reboot into the recovery.

Where did I go wrong?

 

[suhiSLO]

Just flash the last cm11 with f2fs support to get the tablet working. No need to change recovery.

 

[atoyu]

Just flash the last cm11 with f2fs support to get the tablet working. No need to change recovery.

thx reply,

i listed the step as below. am i right?
1)download recovery_f2fs on cm11 section
2)use the code format mmcblk

mkfs.f2fs -t 0 /dev/block/mmcblk0p2
mkfs.f2fs -t 0 /dev/block/mmcblk0p8

3)install cm12
4)reboot


if i were wrong,may i know the step and compatible recovery download link?

 

[GoldenAvatar]

Just flash the last cm11 with f2fs support to get the tablet working. No need to change recovery.

Why should I flash CM11 (KitKat) when I want CM12 (Lollipop, that this thread is about)?

I used the software (recovery, firmware) that Namidairo posted in his first post in this thread.

 

[suhiSLO]

Why should I flash CM11 (KitKat) when I want CM12 (Lollipop, that this thread is about)?

I used the software (recovery, firmware) that Namidairo posted in his first post in this thread.

Just to make the tablet working until namidairo offers a solution. At least that's what I did.

---------- Post added at 04:41 PM ---------- Previous post was at 04:34 PM ----------

thx reply,

i listed the step as below. am i right?
1)download recovery_f2fs on cm11 section
2)use the code format mmcblk

3)install cm12
4)reboot


if i were wrong,may i know the step and compatible recovery download link?

If you want to try to make cm12 work use the recovery from this topic. I replied to goldenavatars post.

 

[atoyu]

when using recovery on this topic, it hold on asus boot screen......

 

[rameera]

any md5 for this file?

Did the install using TWRP 2.7.0.0 and also flashed the gapps-lp, On reboot screen stuck at the Asus logo and will not proceed. Is there a md5 available for the ROM zip file so I can do a check?

 

[ChrisPovey]

I am currently running namidairo's CM11 build on my TF201. Do I just flash the recovery and then this image to get lollipop?

Also was GAPPS work with this build?

Thanks.

 

[Namidairo]

Oops, SELinux chucks a fit about some of the vendor libs when I set it to enforcing.

This is why you actually test with the same kernel that you are deploying. (Reboot shenanigans meant the bootloader ignored my staging partition and didn't flash the new kernel, yay.)

Anyway, I'll pull the zip and upload one with it set to permissive for now (Which is a temporary fix, I'll fix up the sepolicies when I have time)

Edit: Up

 

[suhiSLO]

Working. Thank you.

 

[Bastaerd]

Oops, SELinux chucks a fit about some of the vendor libs when I set it to enforcing.

This is why you actually test with the same kernel that you are deploying. (Reboot shenanigans meant the bootloader ignored my staging partition and didn't flash the new kernel, yay.)

Anyway, I'll pull the zip and upload one with it set to permissive for now (Which is a temporary fix, I'll fix up the sepolicies when I have time)

Edit: Up

Can't wait to try this later tonight

 

[qubz]

Yup, same.

 

[suhiSLO]

Missing superSU. So additional apk install needed. I tried to install zip version but it looks like it didn't stick.

 

[Bastaerd]

Missing superSU. So additional apk install needed. I tried to install zip version but it looks like it didn't stick.

Did you enable root in developer options?