• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

[ROM][6.0.0_r26][AOSP/CAF] CyanogenMod 13 [UNOFFICIAL][UBERTC 4.9][12/02]

Search This thread

Dark_Eyes_

Recognized Developer / Recognized Contributor
Sep 19, 2013
2,706
10,638
Hi guys,

I build CM13 for both hammerhead and hammerheadcaf with UBERTC 4.9 for best performance and battery life. It is still a work in progress, but since official nightly are out, I guess it's getting more stable and shouldn't give you to much trouble. Please don't report bugs to Cyanogen since this is an unofficial build, but let me know.

Procedure :
0) Make sure you have bootloader HHZ12k (latest radio is not mandatory but is m8974a-2.0.50.2.27) and you have the proper recovery for hammerhead OR hammerheadcaf
1) Full wipe if coming from other ROM (wipe system, data, cache, dalvik cache). Not necessary if you are already on one of my previous cm13 builds
2) Flash CM13
3) Flash GAPPS

Now works with multirom primary or secondary.

Please provide feedback, and let me know what's broken so I can update the SECOND POST. I'm planning on releasing periodic builds, and I'll try to fix what's not working when possible.

Obviously you'll need a Marshmallow GAPPS package. There are some available around, pick your favorite. I'm suggesting OPENGAPPS, but any good one should work.

Download ROM - AOSP and CAF
Download GAPPS

Please consider a donation if you want to support my efforts !!!

Enjoy !!!
 
Last edited:

Dark_Eyes_

Recognized Developer / Recognized Contributor
Sep 19, 2013
2,706
10,638
Interested. Does this work with multirom? And do you have a features/mods list?

Sent from my Nexus 5 using Tapatalk

It's pure cm as of now. I haven't added anything else so it's all the basic cm features for now. Some might be missing or broken, as I said it's still in alpha stage.

As for multirom, please try and report. I've never used it so i can't test it. Thanks!
 
  • Like
Reactions: oo0

vikrant699

Senior Member
Mar 31, 2015
304
748
21
New Delhi
Hi guys,

I managed to build a working CM13. It is still in an alpha state, and I can't say I thouroughly tested it. I'm sharing it with you all to play with it, but I can't stress this enough : It is highly untested, so don't use it as a daily driver (or do so at your own risks). Also don't report bugs to Cyanogen since this is an unofficial build.

AS OF NOW, BOOT ANIMATION DISSAPEARS, BUT LET IT GO AND IT WILL BOOT UP JUST FINE !!!

If you have problems with fc on first boot, clean flash rom, boot it once, then install gapps. After that you might have to enable permissions for Google play services and other google apps.

Please provide feedback, and let me know what's broken so I can update the OP. I'm planning on releasing periodic builds, and I'll try to fix what's not working when possible.

Obviously you'll need a Marshmallow GAPPS package. There are some available around, pick your favorite. I'm suggesting one for you, but any good one should work.

Download ROM
Download GAPPS Thanks @zephiK for the package!

Please consider a donation if you want to support my efforts !!!

Enjoy !!!

i used the version which was compiled on 21102015 as it was on afh :3 now will use this, that version had some minor bugs :3
 

ddarshan

Senior Member
Apr 15, 2011
381
85
Bangalore
Can i flash like this:

1. Factory reset
2. Flash CM 13
3. Flash Gapps
4. Flash EX 6.04
5. Flash other zips for permissive
6. Flash modified boot.img from chainfire
 

Dark_Eyes_

Recognized Developer / Recognized Contributor
Sep 19, 2013
2,706
10,638
Can i flash like this:

1. Factory reset
2. Flash CM 13
3. Flash Gapps
4. Flash EX 6.04
5. Flash other zips for permissive
6. Flash modified boot.img from chainfire

Well i would suggest flashing just cm13 then gapps first. See if it boots fine and do initial setup. If it fails, wipe system, data, cache and dalvik, install cm13 and boot up. Do initial setup, then flash gapps and boot. At this point if everything is working, back up in twrp and flash EX. No need to flash chainfire boot nor permissive.
 
  • Like
Reactions: ddarshan

Top Liked Posts

  • There are no posts matching your filters.
  • 33
    Hi guys,

    I build CM13 for both hammerhead and hammerheadcaf with UBERTC 4.9 for best performance and battery life. It is still a work in progress, but since official nightly are out, I guess it's getting more stable and shouldn't give you to much trouble. Please don't report bugs to Cyanogen since this is an unofficial build, but let me know.

    Procedure :
    0) Make sure you have bootloader HHZ12k (latest radio is not mandatory but is m8974a-2.0.50.2.27) and you have the proper recovery for hammerhead OR hammerheadcaf
    1) Full wipe if coming from other ROM (wipe system, data, cache, dalvik cache). Not necessary if you are already on one of my previous cm13 builds
    2) Flash CM13
    3) Flash GAPPS

    Now works with multirom primary or secondary.

    Please provide feedback, and let me know what's broken so I can update the SECOND POST. I'm planning on releasing periodic builds, and I'll try to fix what's not working when possible.

    Obviously you'll need a Marshmallow GAPPS package. There are some available around, pick your favorite. I'm suggesting OPENGAPPS, but any good one should work.

    Download ROM - AOSP and CAF
    Download GAPPS

    Please consider a donation if you want to support my efforts !!!

    Enjoy !!!
    8
    Microphone fixed

    Guys, I just pushed a new build with working microphone. Camcorder, calls, etc. should be all good to go now. At this point it should be getting quite stable, OpenGapps are also fixed, so It might start to look like a daily driver. Please provide feedback and report any bugs you may encouter.

    I also merged the patch to have it work with MultiRom primary or secondary. And it's built with optimized UBERTC 4.9 toolchains ;)

    Enjoy!!!

    Please consider a donation if you want to support my efforts !!!
    7
    Sorry to keep you guys waiting, my local repo got corrupted (i don't know how), so I had to start over from scratch. I'm downloading the updated source as I write, I should have a new build in a couple days. A lot has been merged since my last build so hopefully it will have a couple fixes too. Hope you guys enjoyed it ;)

    Stay tuned for more.
    5
    New AOSP build is up! I've tested root as much I as could and it worked for every app. Adway seems broken but I don't think it has anything to do with root...

    CAF build is cooking now, I'll upload it as soon as it's done!

    Enjoy !!!
    4
    Thanks for reporting. I'll build a new one tonight and hopefully root was fixed upstream. I'm pretty sure it was working fine on previous builds so if it's still not fixed I'll track what was added that broke root and revert it.

    Stay tuned!