[Rom][6.0.1]Lenovo ZUK Z2 PLUS (2132) INDIAN firmware V2.0.093ST using MI Flash tool

[Annabathina]

I am not responsible for anything that may happen to your phone as a result of installing custom roms and/or kernels. you do so at your own risk and take the responsibility upon yourself.

Part -A Configure Computer
1) Download and extract the Stock firmware, Setup tools & Drivers
2) Install ADB Drivers
3) Install Lenovo ZUK Z2 PLUS (2132) Drivers
4) Setup Tool all in one
5) Setup Mi Flash tool

Part -B Booting device in to EDL Mode
Note : Thank to @mauronofrio for his tool
1) Enable Android debugging (ADB) in developer options
2) Connect your device to PC
3) open Tool all in one
4) The tool detects your device and pop up a window on your z2 plus device

5) chick and click OK
6) Know go to Tool all in one > Advance Options
7) click Reboot EDL

8) Device will boot in to EDL Mode

Part -C Flashing stock Firmware
1) Open Mi Flash tool
2) Click on refresh to detect your Z2 plus as COM X ( Note : X represents device port numbers )
3) If you want to lock bootloader then select " clear all and lock " which was present on right bottom corner
4)Click on flash

Note : Never disconnect your device while MI tool was flashing
5) It take 300 sec to complete task after that hold power key for 15 sec to boot your device
​

Lenovo ZUK Z2 Plus ( 2132) Marshmallow
Indian firmware ( Note : all partitions fixed by me :good: )

Mi Flash tool ( Note : Recommended and Modified version by Me for deep partitions:fingers-crossed: )

Tool All In One ( Note : for Booting in to EDL, flashing TWRP , Unlock & lock bootloader:cowboy: )

adb-setup ( Note : Very important )

Other useful links ( If you want )

Drivers
PdaNet
Qualcomm_QHSUSB
ZUK_Z2132_drivers_V1.0.5
Tools
QPST

@ZUK ................................... for device
@zukfans.eu ..................... for source
@Francko76 .................... for source
@xiaomi .............................. for MI Flash tool
@mauronofrio ................. for Tool All In One
@Annabathina .................. for fixing deep partitions

@XDA ................... developers for helping me
@lenovo forum ........... developers

Lenovo ZUK Z2 Plus ................. Model 2132​

XDA:DevDB Information
[Rom][6.0.1]Lenovo ZUK Z2 PLUS (2132) INDIAN firmware V2.0.093ST using MI Flash tool, ROM for the Lenovo ZUK Z2 (Plus)

Contributors
Annabathina
ROM OS Version: 6.0.x Marshmallow
Based On: Stock rom

Version Information
Status: Stable
Current Stable Version: 2.0.093
Stable Release Date: 2016-08-11

Created 2017-09-25
Last Updated 2017-09-25

 

[Annabathina]

Reserved

 

[Annabathina]

Reserved

 

[Annabathina]

redserved

 

[Vimi12]

Which is better

Which stock rom 7.0 or 6.0 ...is best for battery...

 

[adil786ali63]

Which stock rom 7.0 or 6.0 ...is best for battery...

6.0.. less bugs too

 

[harshmehta29]

If i flash this rom will my warranty be restored? Currently i am on aicp

 

[VivekBhagat]

If i flash this rom will my warranty be restored? Currently i am on aicp

Yes your device will be like when you purchased.

 

[anis3097]

Help me

Does my phone get ota updates after flashing the rom??????

 

[omki511]

have you tried ...?

have you flashed this rom. and are able to get ota ?

---------- Post added at 12:28 PM ---------- Previous post was at 12:25 PM ----------

6.0.. less bugs too[/you got ota 7.0 after falshing this rom ??

 

[omki511]

cant get ota update

hi, i flashed as mention above but now the problem is that i cant get ota update to zui 2.0.133 and android 7.0

 

[sjhotwings]

phone is bootloader unlocked and rooted, is there any other steps i need to do before flashing back to the original firmware ? or just go ahead and follow instruction on the OP ?

 

[arun356y]

hi, i flashed as mention above but now the problem is that i cant get ota update to zui 2.0.133 and android 7.0

same problem here, I am going to flash using qfil and will update here.

 

[[email protected]]

Lenovo z2 plus flashing

Please don't use Mi flash tool, it was not properly flashing.Use qfil for proper flashing.

---------- Post added at 09:30 AM ---------- Previous post was at 09:27 AM ----------

same problem here, I am going to flash using qfil and will update here.

Flash stock room again with qfil and after that you will definitely get ota updates.

 

[arun356y]

Please don't use Mi flash tool, it was not properly flashing.Use qfil for proper flashing.

---------- Post added at 09:30 AM ---------- Previous post was at 09:27 AM ----------



Flash stock room again with qfil and after that you will definitely get ota updates.

yeah I flashed 2.5 104 ST and now its working fine

 

[meetgajjar31]

I flash rom using QFIL but it still shows me "system has been root" in System Update app

I flash rom with "unlock" the bootloader as well as "relock" bootloader... but i can't able to update.

It's not working....

 

[themechmonk]

I flash rom using QFIL but it still shows me "system has been root" in System Update app

I flash rom with "unlock" the bootloader as well as "relock" bootloader... but i can't able to update.

It's not working....

Can you help me in flashing through qfil??

---------- Post added at 12:45 PM ---------- Previous post was at 12:44 PM ----------

How to flash through qfil ??

 

[kanwaljeetsm]

Will i be able to get system update after flashing this if the bootloader is locked?

 

[SteelBodyX]

anyone using the zui 2.0 marshmallow build? What's the SOT.. I'm currently on Chinese zui 3.1, hoping to get back to Indian zui 2.0 because of double notification but the battery life of Chinese zui 3.1 is good as i easily get 7hr 30 to 8hr even with moderate to heavy usage

 

[fathullah01]

anyone using the zui 2.0 marshmallow build? What's the SOT.. I'm currently on Chinese zui 3.1, hoping to get back to Indian zui 2.0 because of double notification but the battery life of Chinese zui 3.1 is good as i easily get 7hr 30 to 8hr even with moderate to heavy usage

How do you get that much of SOT i barely got 5.30 hrs max sot