• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

[ROM][6.0.1] LineageOS 13.0

Search This thread

Ziyan

Recognized Developer
Jun 6, 2010
875
9,125
28
Szentes
LineageOS 13.0
Marshmallow - Android 6.0

About LineageOS
LineageOS is a free, community built, aftermarket firmware distribution of Android 6.0.1 (Marshmallow), which is designed to increase performance and reliability over stock Android for your device. LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.

All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit our Gerrit Code Review. Your changelog is whatever was merged into gerrit.

Additional Information:

Download:
The latest builds & changelogs are available at

Extras:

Google Apps can be found at http://opengapps.org/?api=6.0&variant=pico - beware that only the pico version will fit, unless you change your partition sizes! Also, starting from M, it's recommended to install gapps before the initial boot so the permissions are properly set up.

Bugs:
- Sometimes, quiet speaker pop sounds can be heard at the beginning and/or end of some audio streams (ie. touch sounds - the workaround is to disable them). For some reason, this isn't affecting everyone.
- Report back anything else you find which isn't listed here :)

FAQ:
Does this ROM supports F2FS?
- Yes, on /data and /cache - although /cache F2FS support might get removed in the future, as it's worthless.

Does this ROM uses DDK 1.9?
- Yes, with all the camera issues (ie. pink lines, rare crashes) resolved.

Why does the initial boot take so long, and where are my live wallpapers?!
- To make room on the system partition for the (bigger) M gapps packages, I had to sacrifice dexpreopt and the live wallpapers. This can result in pretty long initial boots or upgrade boots, and dexpreopt might run during the first time setup wizard as well, slowing down the system for an additional couple minutes.

Will you release newer ZMoD builds or something?
- Yes, as soon as the memory optimizations are finalized and I find enough time...

Want to support development? You can consider donating, I spent countless of hours with this :)

XDA:DevDB Information
LineageOS 13.0, ROM for the Samsung Galaxy Nexus

Contributors
Ziyan, MWisBest, Android-Andi, Everyone else who helped me: AOSP, Hashcode, ...
Source Code: https://github.com/LineageOS

ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.0.x

Version Information
Status: Nightly

Created 2016-02-11
Last Updated 2018-12-30
 

NightWolf1396

Senior Member
Sep 25, 2011
72
22
AOSP Keyboard keeps crashing.. Apart from that everything seems to be working. Will check for more bugs in the meantime
 

JGarcia94

New member
Feb 18, 2015
2
1
Extraordinary work!! :D

PD: Device doesn't receive Internet connection. My ISP is Oceans Network from Spain.
 
Last edited:

Gabe2409

Member
Feb 21, 2015
10
1
Works perfectly

Works great! No problems at all and have been running it for 3hrs. Have xposed also installed. Great work! :D
I will continue to use and report any bugs i encounter.
 

Axel85

Senior Member
May 9, 2010
814
148
great...Testing this rom right now. I had to rewipe,since installing gapps after the rom boot cause google play service to crash. I really wish there will be an official cm13 for galaxy nexus.I have a nexus 5 but I like galaxy nexus design and amoled screen...

Edit: this ROM runs very well,maybe a little better than other ones based on marshmallow
 
Last edited:

nikodr

Senior Member
Jul 14, 2010
523
206
How much free ram? Is it 802mbytes or 762?in cn 12.1 there was a kernel boot img by zuyan that gave 802 mbytes of ram
 

uji_sine

Senior Member
Jun 2, 2012
101
24
Need suggestion, rootexplorer shown no root on this rom, how do i.
I try to flash ROM with TWRP, then fix root permission. @Ziyan could you please create this ROM support CWM.
 
Last edited:

Ziyan

Recognized Developer
Jun 6, 2010
875
9,125
28
Szentes
Having random reboots now, is this happening to anyone else?
Logs?

@Ziyan can i flash kernels for lollipop like the one you posted on cm 12.1 recently?
No, but I attached a new kernel which has 811 mb userspace ram available (instead of the usual 756 mb). I think the crashes and tiler out of memory problems are gone, but report back if there's one single camera/camcorder crash happening :)
EDIT: the transition from the bootloader logo (google logo) to the boot animation won't be.. uhm... smooth, but it's nothing to worry about, I forgot to work it around this time :)
 

Attachments

  • boot.img
    5.1 MB · Views: 1,479
Last edited:

NightWolf1396

Senior Member
Sep 25, 2011
72
22
Logs?


No, but I attached a new kernel which has 811 mb userspace ram available (instead of the usual 756 mb). I think the crashes and tiler out of memory problems are gone, but report back if there's one single camera/camcorder crash happening :)
EDIT: the transition from the bootloader logo (google logo) to the boot animation won't be.. uhm... smooth, but it's nothing to worry about, I forgot to work it around this time :)

Will get them as soon as I get home
 

werty100

Senior Member
Aug 31, 2011
828
678
Logs?


No, but I attached a new kernel which has 811 mb userspace ram available (instead of the usual 756 mb). I think the crashes and tiler out of memory problems are gone, but report back if there's one single camera/camcorder crash happening :)
EDIT: the transition from the bootloader logo (google logo) to the boot animation won't be.. uhm... smooth, but it's nothing to worry about, I forgot to work it around this time :)

I will try zImage in my AOSP rom thanks can i use it no ?
Also there is no git commit for this extra RAM netither in OMAP4-AOSP or Ziyann github
 

Ziyan

Recognized Developer
Jun 6, 2010
875
9,125
28
Szentes
I will try zImage in my AOSP rom thanks can i use it no ?
Also there is no git commit for this extra RAM netither in OMAP4-AOSP or Ziyann github

Using the zImage on any DDK 1.9 / Android 6.0.1 ROM should be fine.

There is no git commit because I didn't push it yet (the values aren't final), but to get the same kernel I uploaded:
Clone https://github.com/CyanogenMod/android_kernel_samsung_tuna/tree/cm-13.0, and apply this, but with the following values:
CONFIG_ION_OMAP_TILER2D_SIZE=72
CONFIG_ION_OMAP_IPU_MEM_IOBUFS_SIZE=32

Need suggestion, rootexplorer shown no root on this rom, how do i.
I try to flash ROM with TWRP, then fix root permission. @Ziyan could you please create this ROM support CWM.
Enable root the same way you did it on CM12.1: enable developer settings, then you'll find the root option there. And just forget about CWM... :) don't use fix permissions and friends, as it might cause problems.
 
Last edited:

werty100

Senior Member
Aug 31, 2011
828
678
Using the zImage on any DDK 1.9 / Android 6.0.1 ROM should be fine.

There is no git commit because I didn't push it yet (the values aren't final), but to get the same kernel I uploaded:
Clone https://github.com/CyanogenMod/android_kernel_samsung_tuna/tree/cm-13.0, and apply this, but with the following values:
CONFIG_ION_OMAP_TILER2D_SIZE=72
CONFIG_ION_OMAP_IPU_MEM_IOBUFS_SIZE=32

I try before with zImage but rom was no booting i will try alter with commits thanks and kernel source
 

Top Liked Posts

  • There are no posts matching your filters.
  • 131
    LineageOS 13.0
    Marshmallow - Android 6.0

    About LineageOS
    LineageOS is a free, community built, aftermarket firmware distribution of Android 6.0.1 (Marshmallow), which is designed to increase performance and reliability over stock Android for your device. LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.

    All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit our Gerrit Code Review. Your changelog is whatever was merged into gerrit.

    Additional Information:

    Download:
    The latest builds & changelogs are available at

    Extras:

    Google Apps can be found at http://opengapps.org/?api=6.0&variant=pico - beware that only the pico version will fit, unless you change your partition sizes! Also, starting from M, it's recommended to install gapps before the initial boot so the permissions are properly set up.

    Bugs:
    - Sometimes, quiet speaker pop sounds can be heard at the beginning and/or end of some audio streams (ie. touch sounds - the workaround is to disable them). For some reason, this isn't affecting everyone.
    - Report back anything else you find which isn't listed here :)

    FAQ:
    Does this ROM supports F2FS?
    - Yes, on /data and /cache - although /cache F2FS support might get removed in the future, as it's worthless.

    Does this ROM uses DDK 1.9?
    - Yes, with all the camera issues (ie. pink lines, rare crashes) resolved.

    Why does the initial boot take so long, and where are my live wallpapers?!
    - To make room on the system partition for the (bigger) M gapps packages, I had to sacrifice dexpreopt and the live wallpapers. This can result in pretty long initial boots or upgrade boots, and dexpreopt might run during the first time setup wizard as well, slowing down the system for an additional couple minutes.

    Will you release newer ZMoD builds or something?
    - Yes, as soon as the memory optimizations are finalized and I find enough time...

    Want to support development? You can consider donating, I spent countless of hours with this :)

    XDA:DevDB Information
    LineageOS 13.0, ROM for the Samsung Galaxy Nexus

    Contributors
    Ziyan, MWisBest, Android-Andi, Everyone else who helped me: AOSP, Hashcode, ...
    Source Code: https://github.com/LineageOS

    ROM OS Version: 6.0.x Marshmallow
    ROM Kernel: Linux 3.0.x

    Version Information
    Status: Nightly

    Created 2016-02-11
    Last Updated 2018-12-30
    37
    New build up:
    - synced with the CM sources as of 05/30
    - enabled CMA from the OMAP4-AOSP project

    Report back how it works - I'd like to move the nightlies from 12.1 to 13.0 as soon as possible, but good user feedback is a must (don't worry, there will be a 12.1 snapshot build on get.cm before the switch happens) :)
    37
    New build up:
    - synced with the CM repos @ 03/10
    - more userspace memory freed up (876mb available atm)
    - fixed RIL crash after the other party ends the call (thanks to @MWisBest)

    To be honest, other than quickly checking if stuff works properly, I didn't test this build thoroughly, as we've mainly focused on OMAP4-AOSP, so report back if there are any new issues :)
    31
    Hey @Ziyan,

    Any plans to release a new build with ZRAM disabled anytime soon? Think it would be a pretty stable release :)

    Thanks.

    There it is. Other than that and the sync with the CM repos, a minor SELinux fix and the return of enforcing (the last build was permissive), there aren't any tuna specific changes. I'm thinking about updating the extract-files script in the following days, and finally switching the nightlies to 13.0 (after getting the CM guys to create a 12.1 snapshot).
    28
    Well, the nightlies are now switched over to 13.0, with a snapshot build of CM12.1 added to get.cm. I think this reached the stability and performance of 12.1 :) as a side note, for those who're upgrading from 12.1, be careful - you need to flash a 6.0 compatible gapps before the first boot of 13.0!