[ROM][6.0.1][OFFICIAL] LineageOS 13.0

[musical_chairs]

For instructions about installing or building for toroplus, see the wiki:http://wiki.lineageos.org/maguro_info.html.

Builds are available at https://download.lineageos.org/toroplus.

Google Apps can be found at http://opengapps.org/?api=6.0&variant=pico. Note that you must use the pico version unless you have resized your partitions.

XDA:DevDB Information
LineageOS 13.0, ROM for the Samsung Galaxy Nexus

Contributors
musical_chairs, Ziyan
Source Code: https://github.com/LineageOS

ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.0.x
Based On: LineageOS

Version Information
Status: Nightly

Created 2016-04-19
Last Updated 2017-03-25

 

[musical_chairs]

After over a year and a half, we once again have official CyanogenMod builds.

 

[Max Frost]

After over a year and a half, we once again have official CyanogenMod builds.

Yes we do and it's because of your perseverance . Thanks for keeping this old phone in the thick of it and carrying the torch !

 

[galuh]

Does it is necessary to flash it using attached recovery in cm download page?can we use twrp?

 

[musical_chairs]

Does it is necessary to flash it using attached recovery in cm download page?can we use twrp?

You can use TWRP, I strongly recommend that. I think you'd need to use cm's recovery if you want to use cm-updater to automatically install ROM updates. But I think TWRP is the way to go.

 

[galuh]

After fresh installation i've got my net connection,but after sometimes i was found that my toroplus wouldn't picked up any inet signal,but i can use it flawlessly fine to male a phone call and texting.
Ps: sorry for my screwed english

 

[jtdev]

So stoked to see this, I really appreciate this device getting some love!

I tried out cm-12.1-20160530-NIGHTLY-toroplus yesterday, and CM-wise everything looked great. No stutters at all, and some persistent app crashing I'd been having with CM 11 snapshot M8 went away.

Downside is that I couldn't for the life of me get it to activate on Sprint, via Ting. I even full deactivated it twice, waiting a couple hours and then assigning it a new phone number each time. I had to go back to CM 11 to get the phone side back, so it looks like the radio bits aren't ready yet. Still, great to see an update!

 

[Max Frost]

So stoked to see this, I really appreciate this device getting some love!

I tried out cm-12.1-20160530-NIGHTLY-toroplus yesterday, and CM-wise everything looked great. No stutters at all, and some persistent app crashing I'd been having with CM 11 snapshot M8 went away.

Downside is that I couldn't for the life of me get it to activate on Sprint, via Ting. I even full deactivated it twice, waiting a couple hours and then assigning it a new phone number each time. I had to go back to CM 11 to get the phone side back, so it looks like the radio bits aren't ready yet. Still, great to see an update!

When you went back to CM11 you had to re-provision the phone since you had changed numbers right ? I'm on MM but I'm going to download and install the build you tried . I ran this 5.1 for quite some time and never had a problem You actually shouldn't have even have had to activate . When you changed numbers you definitely lost provisioning and would definitely have had to re-provision . If you are presently activated on CM 11 with GPS , Phone and data all working you should be able to clean flash this and reboot and just skip the activation screens . It's not needed and no need to wait . Just skip through it and it should all still work . Unlike CM 11 CM 12 has never been able to do a hands free or even manual re-provision for me . Just try what I suggested .

 

[jtdev]

When you went back to CM11 you had to re-provision the phone since you had changed numbers right ? I'm on MM but I'm going to download and install the build you tried . I ran this 5.1 for quite some time and never had a problem You actually shouldn't have even have had to activate . When you changed numbers you definitely lost provisioning and would definitely have had to re-provision . If you are presently activated on CM 11 with GPS , Phone and data all working you should be able to clean flash this and reboot and just skip the activation screens . It's not needed and no need to wait . Just skip through it and it should all still work . Unlike CM 11 CM 12 has never been able to do a hands free or even manual re-provision for me . Just try what I suggested .

I had a working number with CM 11 before I installed the CM 12 build from ClockworkMod Recovery, but I didn't have GPS turned on (I wouldn't have thought it mattered.) Everything went smooth, but I noticed that the signal-strength had an exclamation mark and the phone side wasn't working. I can't remember if it came up with the hands-free dialogs then, or after I tried to reactivate it. I'll give it another go this weekend, thanks again!

 

[Max Frost]

I had a working number with CM 11 before I installed the CM 12 build from ClockworkMod Recovery, but I didn't have GPS turned on (I wouldn't have thought it mattered.) Everything went smooth, but I noticed that the signal-strength had an exclamation mark and the phone side wasn't working. I can't remember if it came up with the hands-free dialogs then, or after I tried to reactivate it. I'll give it another go this weekend, thanks again!

@jtdev @musical_chairs I just clean flashed the 05/30/2015 official build . Right off the bat I had telephony and place a couple of calls . I had to finesse it a bit to get 3g going as it switching around several times from LTE/3G etc , after a reboot 3G popped right up and continues to be stable . I tried browsing and all was fine . I've also updated profile and prl successfully under settings/about phone /sprint updates .

Yeah , try it again and good luck on it . I'm on ringplus but 5.1 always worked fine on TING which I used until recently .

If it still doesn't work for you let me know and I can send you something to try which should work .

 

[Max Frost]

I had a working number with CM 11 before I installed the CM 12 build from ClockworkMod Recovery,!

Yes but you stated you deactivated that number and tried a couple of others . When you deactivated that first number you could not have gotten ting going again without having to reprovision again on CM 11 and you would have lost that first number . There's no way you can change a number on Ting without having to re-provision again and losing that number for good . even restoring a nandroid wouldn't work without it .

 

[jtdev]

@jtdev @musical_chairs I just clean flashed the 05/30/2015 official build . Right off the bat I had telephony and place a couple of calls . I had to finesse it a bit to get 3g going as it switching around several times from LTE/3G etc , after a reboot 3G popped right up and continues to be stable . I tried browsing and all was fine . I've also updated profile and prl successfully under settings/about phone /sprint updates .

Yeah , try it again and good luck on it . I'm on ringplus but 5.1 always worked fine on TING which I used until recently .

If it still doesn't work for you let me know and I can send you something to try which should work .

Just tried it again twice, I think I almost had it the first time.

Try #1: Turned on all radios in CM 11, rebooted to ClockworkMod Recovery, installed 5/30 nightly and OpenGApps-pico, and it came up in CM 12 with the 3G indicator right away! (Actually after a couple shell crashes.) I then updated profile (still 3G), and then updated PRL. It said the PRL update was successful, but it killed the 3G, nothing I could do to bring it back.

Try #2: Restored CM 11 backup, started over. Same setup sequence as before, no shell crashes this time, but I got the exclamation mark in the signal strength indicator again, and couldn't get 3G going.

I'm restoring CM 11 again now, going to have to put this aside for a while. Thanks for the feedback though, at least I know it's possible!

 

[Max Frost]

Just tried it again twice, I think I almost had it the first time.

Try #1: Turned on all radios in CM 11, rebooted to ClockworkMod Recovery, installed 5/30 nightly and OpenGApps-pico, and it came up in CM 12 with the 3G indicator right away! (Actually after a couple shell crashes.) I then updated profile (still 3G), and then updated PRL. It said the PRL update was successful, but it killed the 3G, nothing I could do to bring it back.

Try #2: Restored CM 11 backup, started over. Same setup sequence as before, no shell crashes this time, but I got the exclamation mark in the signal strength indicator again, and couldn't get 3G going.

I'm restoring CM 11 again now, going to have to put this aside for a while. Thanks for the feedback though, at least I know it's possible!

You probably already know this so keep in mind if your preferred network is set to LTE you will have a 3G showing but no internet even though it's lit up 3G . You must set it to 3G preferred to have connectivity .

try flashing this file from recovery . It's a nice menu letting you pic your provider for ting , ringplus etc . The menu pops open a box so you select your carrier and applies the exact apn you need . I love it . Works great . Works on three sprint devices for me .

Credit for due diligence to @JakeG1984 for finding and spreading word , it's how I found it plus his useful info and post http://forum.xda-developers.com/showpost.php?p=66734418&postcount=10663

https://www.androidfilehost.com/?fid=24531035584725098

Credit for this apn selector should got to this guy @ChangeOfJinzo
http://androidforums.com/threads/al...-lg-volt-on-cm13-cm12-other-roms-too.1024839/

 

[jtdev]

Good news everyone! I installed today's daily (cm-12.1-20160606-NIGHTLY-toroplus) and just as I was about to throw in the towel, my 3G indicator came on. It does however take 35+ seconds to go from airplane to 3G, which I can live with, I'm just used to it taking less than 2 seconds.
@Max Frost - I didn't use the utility you suggested, I got cold feet reading the backstory.

 

[Max Frost]

Good news everyone! I installed today's daily (cm-12.1-20160606-NIGHTLY-toroplus) and just as I was about to throw in the towel, my 3G indicator came on. It does however take 35+ seconds to go from airplane to 3G, which I can live with, I'm just used to it taking less than 2 seconds.
@Max Frost - I didn't use the utility you suggested, I got cold feet reading the backstory.

What gave you cold feet out of curiosity . It flashes perfect , works perfect so I have no clue and would like to know the deterring factor for future reference . I only suggested it if you could not get it to work . I mostly use it on my other devices to get LTE . I might add I've never needed it to get telephony or 3G with this rom .

 

[Cardcaptor_RLH85]

So, is this going to be the official thread for the Official CM 13 ROM too? I don't have any issues right now I just want to know where to ask if I do in the future. (I haven't run an official CM ROM in years now.)

 

[Ckpe4]

So, is this going to be the official thread for the Official CM 13 ROM too? I don't have any issues right now I just want to know where to ask if I do in the future. (I haven't run an official CM ROM in years now.)

Thanks musical_chairs, we already have official CM13 builds .
I think that this topic will be about CM13 (As CM11 few years ago).

 

[musical_chairs]

I guess this will be the thread for official cm-13.0 now. There is a cm-12.1 snapshot on get.cm, that can be discussed here as well.

 

[saeraphas]

charging support on Samsung HDMI dock

Is there a setting that I can change to allow charging from the official Samsung HDMI dock? I've got a pair of toroplus running this official CM13 build (one's snapshot and one's nightly), and neither one will charge while on the dock. The battery gradually depletes over the course of a few weeks, so it must be getting some power, just not enough to maintain a charge.

Both phones charge on their respective docks running stock or running zzpianoman's unified 6.0.1.

 

[tomm1e]

The default apn settings cause the phone to get really slow when preferred network was set to LTE/CDMA auto. I digged around the vendor RIL file, I noticed it queries for a numeric field when looking up APNs, I added this field to the apns file and now it doesn't get slow when switching networks.

Manual: Copy this file to /system/etc, go to APN network settings menu and press "Reset to default"

Also, to get LTE working temporarily on CM13, you can use my routefix script from OmniROM thread:
http://forum.xda-developers.com/showpost.php?p=68236074&postcount=24