[ROM][6.0.1] Resurrection Remix M v5.7.3 [27/08/16]

Coldwindofnowhere · Aug 27, 2016

About Resurrection Remix ROM ®

Resurrection Remix the ROM has been based on AOKP, CM, PA, Omni and original Remix ROM builds, this creates an awesome combination of performance, customization, power and the most new features, brought directly to your Device

Many things that in previous versions were tweaked with mods, are now included by default in the ROM so, please enjoy!

Resurrection Remix

supporting many devices

Special thanks to the AOKP team ParanoidAndroid team, the CM team, OMNI team and of course to all the supporters

-INSTALLATION INSTRUCTIONS-

1.- Factory reset
2.- Format your /data partition to f2fs
3.- flash the ROM via TWRP, all the /data partition will be wiped !
4.- Install gapps ( optional ), you can use pico open Gapps or A-Gapps, but no Gapps at all is recommended
5.- Reboot
Please note, that first boot after fresh installation lasts a couple of minutes.

-INSTALLATION FILES-

ROM
CHANGELOG

-Thanks-

Thanks to all the RR rom team, the CM team and @sooti for making cm13 run on our device.

XDA:DevDB Information
Resurrection Remix M v5.7.0, ROM for the Samsung Galaxy S I9000

Contributors
Coldwindofnowhere, sooti
Source Code:
Rom: https://github.com/ResurrectionRemix
Device Tree: https://github.com/Coldwindofnowhere

ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.0.x

Version Information
Status: Beta

Created 2016-04-09
Last Updated 2016-06-30

Coldwindofnowhere · Jul 28, 2016

Please do a factory reset when you update the rom, this will prevent issues. ... and don't forget to backup your data.

Known bugs :

- SoD for some people ... any more feedback ?

- Network shutting down (will be fixed in next version)

- Codec issues (?)

- You say

-----------------------------------
Various errors found in a logcat:

Code:

wifi_gbk2utf: g_pItemList is NULL
native  : do suspend true
bt_a2dp_hw: adev_set_parameters: ERROR: set param called even when stream out is null

>> I'm also getting this quite often when wifi is enabled ... any idea ?

Changelog :

20160609

- RR v5.6.9
- Android 6.0.1_r46 and latest security patches
- RIL should be fixed
- Highend gfx is now enabled by default
- Updated kernel with device specific optimization flags
- Newest DragonTC toolchain and i'm using google androideabi toolchain back (instead of UberTC)

20160509

- Fixed bluetooth
- Updated sooti's repos
- More kernel optimizations (see github, as usual)

20160506

- RR v5.6.8
- Android 6.0.1_r43 and latest security patches
- Nuplayer as defaut media player
- Fixed playback of many codecs
- No more Archi optimizations, is that any slower ?

20160416

- RR v5.6.7 (6.0.1_r24)
- No more reboots when the device is going to sleep
- Advanced settings are back !
- AudioFX is back too, but i advice you to use voodoo sound app if you want more settings
- Built using Ubertc 4.9 and archidroid optimizations
- Custom clang 3.9 toolchain (https://github.com/dragon-tc/DragonTC)

20160409

- Initial release

Todo ( more like a personal reminder ) :

- CMHW bringup (done, LiveDisplay is working !)
- Device files cleanup and reorganization (done)
- Bring back and fix shutter (done)
- Remove useless stuff to free some space in /system (see script)
- See if there's something wrong with Gallery
- More updates
- Not enough time to work on android stuff (unable to fix)

FAQ :

How to get rid of transparent status bar ?

Set persist.sys.force_highendgfx to 0 in build.prop

Where is SuperSU ?

You don't need to flash SuperSU, just enable it under the Developer options.

How to change Bigmem modes ?

Use DevilTools app.

I want to undervolt so i can have more battery life, give me the best voltages !

1400mhz: 1425 mV
1300mhz: 1350 mV
1200mhz: 1300 mV
1100mhz: 1250 mV
1000mhz: 1225 mV
800mhz: 1100 mV
400mhz: 950 mV
200mhz: 850 mV
100mhz: 775 mV

Use Kernel Adiutor to set these voltages, but keep in mind that UV can vary a lot between voltages.
Phones can react very differently: if you experience random crashes, add 25 mV to your current voltage.

When will you release the next build ?

Don't ask for ETA ..... and WAIT !

X feature is not working , help me !

Screenshots are attached to this post

dejan- · Apr 9, 2016 at 10:10 AM

question...is call delay maybe gone or at least reduced ? or is this impossible task for i9000?

Coldwindofnowhere · Apr 9, 2016 at 10:15 AM

dejan- said:
question...is call delay maybe gone or at least reduced ? or is this impossible task for i9000?

Well i think it's impossible, it's not that long to be honest for a MM rom running on a 6 years old phone.

The only way to get rid of it is to go back to GB or ICS.

polakmaly11 · Dec 9, 2014 7 0 0

After flashed I had bricked my phone. Of course I restored my stock rom, but anyone have idea what should I do? Or maybe someone have these same problem?

Coldwindofnowhere · Apr 9, 2016 at 12:32 PM

polakmaly11 said:
After flashed I had bricked my phone. Of course I restored my stock rom, but anyone have idea what should I do? Or maybe someone have these same problem?

Could you be more precise, "bricked my phone" is a bit vague.

Also, what rom were you running ? What recovery ? Have you followed the instructions in the OP ?

polakmaly11 · Dec 9, 2014 7 0 0

Black screen and when I tried to reboot there were only vibrations.

Now I'm using Dstriker 1Z with recovery 2.8.6. But I suppose it could be fault of my recovery becouse when I'm trying flash something another I had these same result. So I try to change my recovery maby these will help me. If not I will let you know.

Yea I followed the instructions.

Sent from my D5503 using XDA-Developers mobile app

Coldwindofnowhere · Apr 9, 2016

polakmaly11 said:
Black screen and when I tried to reboot there were only vibrations.

Now I'm using Dstriker 1Z with recovery 2.8.6. But I suppose it could be fault of my recovery becouse when I'm trying flash something another I had these same result. So I try to change my recovery maby these will help me. If not I will let you know.

Yea I followed the instructions.

Sent from my D5503 using XDA-Developers mobile app

Well if you have the same error with flashing other files i guess it's related to the recovery ......

Isn't Dstriker 1Z a rom for the Xperia Z1 ? Just saying, this rom is for the i9000 aka Samsung Galaxy S1 ONLY.

polakmaly11 · Dec 9, 2014 7 0 0

Not only, it's also for Z1 C

Sent from my D5503 using XDA-Developers mobile app

pickandrew · Apr 9, 2016 at 3:13 PM

Hello, This ROM is Resurrection Remix Official or Unofficial?
Thanks!

Coldwindofnowhere · Apr 9, 2016 at 3:22 PM

pickmod said:
Hello, This ROM is Resurrection Remix Official or Unofficial?
Thanks!

It's an unofficial alpha version.

Calvin.manneson · Apr 9, 2016 at 5:03 PM

Good job!!
ROM is a lot more responsive than other cm 13 variants.
The only issue,for now, is the one listed- reboot needed after phone sleeps.
Thanx.

Sent from my GT-I9000 using XDA Premium 4 mobile app

Coldwindofnowhere · Apr 9, 2016

Calvin.manneson said:
Good job!!
ROM is a lot more responsive than other cm 13 variants.
The only issue,for now, is the one listed- reboot needed after phone sleeps.
Thanx.

Sent from my GT-I9000 using XDA Premium 4 mobile app

Actually the workaround i found is to set the min CPU frequency to 200 MHz instead of 100 MHz. Still i'm not sure if it completely solves it ....

Increasing 100 MHz ARM voltage to 1 Volt should work too i guess. Now I have no clue why we're getting this .... voltages should be fine.

Here is the kernel log :

Code:

<6>[  453.092293] request_suspend_state: sleep (0->3) at 453066419665 (2016-04-09 18:15:20.565289128 UTC)
<6>[  453.183312] disable touch controls
<4>[  453.183767] dhd_set_suspend: force extra Suspend setting

Could someone tell me if you get the same force extra Suspend setting on CM 13 ?

logcat :

Code:

04-09 20:41:18.418  1006  1217 I PowerManagerService: Going to sleep due to power button (uid 1000)...
04-09 20:41:19.159  1006  1062 V KeyguardServiceDelegate: onScreenTurnedOff()
04-09 20:41:19.190  1006  1060 I DisplayManagerService: Display device changed state: "Écran intégré", OFF
04-09 20:41:19.198   250   250 D SurfaceFlinger: Set power mode=0, type=0 flinger=0x40564000
04-09 20:41:19.510  1006  1285 D PowerManagerService-JNI: Excessive delay in autosuspend_enable() while turning screen off: 306ms
04-09 20:41:19.510  1006  1060 W art     : Long monitor contention event with owner method=void com.android.server.power.PowerManagerService$1.onDisplayStateChange(int) from PowerManagerService.java:2307 waiters=0 for 304ms
04-09 20:41:19.514  1006  1062 I PowerManagerService: Sleeping (uid 1000)...
04-09 20:41:19.553  1006  1235 E native  : do suspend true
04-09 20:41:19.569   270   270 E bt_a2dp_hw: adev_set_parameters: ERROR: set param called even when stream out is null
04-09 20:41:19.618  2140  2140 D PhoneStatusBar: disable: < expand ICONS* alerts SYSTEM_INFO* back home recent clock search quick_settings >
04-09 20:41:19.897  2140  2140 D PhoneStatusBar: disable: < expand ICONS alerts SYSTEM_INFO back HOME* RECENT* clock SEARCH* quick_settings >

So there is two errors ... weird i don't think it's sufficient to make the device reboot ...

Note that while unplugged, the device goes into deep sleep, but it doesn't when it's plugged.

Calvin.manneson · Apr 9, 2016 at 5:27 PM

Yep.increasing min CPU works .
Interesting ROM.lots of settings that are customizable...

Sent from my GT-I9000 using XDA Premium 4 mobile app

devloz · Apr 9, 2016 at 8:32 PM

@Coldwindofnowhere

In highendgfx solution replace /system/build.prop with /data/default.prop - it will prevail system update, plus it won't cause potential problems when wrongly typed by newbies. In worst case wipe will be necessary.

Calvin.manneson · Apr 9, 2016 at 8:48 PM

Memory/ram settings in devil app seems not to persist thru reboots.
btw,this ROM has impressive performance, very fast.
I'm not using gapps and overclocked to 1300 MHz - no random reboots.

audianer · Apr 10, 2016 at 11:40 AM

hey ^^ where can i get twrp for the i9000? I have allready rooted the phone but i need a recovery witch support f2fs.

thanks ^^

sooti · Apr 10, 2016 at 1:58 PM

@Coldwindofnowhere if you used my kernel source then the SOD is my bad, I added something from xc-racer that removes logging and I think that messed it up, reverted it and it looks like no more SOD

Coldwindofnowhere · Apr 10, 2016

sooti said:
@Coldwindofnowhere if you used my kernel source then the SOD is my bad, I added something from xc-racer that removes logging and I think that messed it up, reverted it and it looks like no more SOD

That explain this weird issue, i couldn't get where it was comming from.
And yes, i used you kernel source, thanks for pointing this out. I'll rebuild the kernel right now to see if the SOD is gone.

Okay, so here is the fix : http://www81.zippyshare.com/v/c9Pg7U6K/file.html
Flash this using TWRP.

@audianer flash any Omnirom 5.1.1build , TWRP will be installed automatically.

xc-racer99 · Apr 11, 2016 at 2:48 AM

sooti said:
if you used my kernel source then the SOD is my bad, I added something from xc-racer that removes logging and I think that messed it up, reverted it and it looks like no more SOD

No, that's my bad, it was my commit. I also got the SoD but only in powered-off charging. We'd have to remove the ram console from the defconfigs as well as a few other places (but I think the debugging via /proc/last_kmsg is worth sacrificing the 1MB of RAM). The headset fix won't do anything to the i9000 as its all #ifdef'ed for the Galaxy S 4G.

[ROM][6.0.1] Resurrection Remix M v5.7.3 [27/08/16]

Senior Member

Senior Member

Attachments

Senior Member

Senior Member

Member

Senior Member

Member

Senior Member

Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Recognized Developer

Senior Member

Senior Member