• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!
  • Fill out your device list and let everyone know which phones you have!    Edit Your Device Inventory

[ROM][6.0.1][Un-Official]Dirty Unicorns Jalebi v10.5[STABLE] [WEEKLY OTAs]

Search This thread

thelazyindian

Senior Member
Jun 3, 2016
92
424
Puri
http%3A%2F%2Fi.imgur.com%2FB0m0iYW.png

Code:
/*
 * I am not responsible for bricked devices, dead SD cards, thermonuclear
 * war, or the current economic crisis caused by you following these
 * directions. YOU are choosing to make these modificiations, and
 * if you point your finger at me for messing up your device, I will
 * laugh at you.
 */

About Us:
Dirty Unicorns is a project that started out with no name. It was a project that was first based off AOKP back in the early days of Jelly Bean. In the early days it was just a one man show on one device, the EVO 3D. Since then, many others have joined the project and it has grown exponentially.

We have seen a lot of talent contribute to this project of ours. Big or small, the focus was always on contributing to the community. That is ultimately why we do what we do. After Jelly Bean, we decided to move to a new base, OmniROM. While AOKP was fun, OmniROM proved to be even more exciting base because it challenged us to see what we could do with a project that had different goals in mind. We learned a lot and again, gain contributors. With Lollipop, we moved to an AOSP base with a lot of patches from CAF to make our older devices function as they should. We grew even more and learned a whole lot more.

It has been an awesome learning experience and is still not over! We are still learning every day and continue to move forward. Lastly, we DO NOT accept, nor ask, for donations. We don't believe in that. Everything that is necessary to keep this project going is out of our own pocket. Gerrit, Jenkins, Websites, Devices, etc. We will never ask for a dime. All we do ask, is that you have patience, search, read and try to enjoy the process with us!!

Kernel Source:
https://github.com/CyanogenMod/android_kernel_cyanogen_msm8916

Flashing Instructions:

- Verify that you're using the latest version of TWRP

- Perform a FULL WIPE as described below if coming from another ROM or a different version of Android
(A full wipe is when you wipe system/data/cache)

- Flash the latest version of this ROM

- Flash recommended GAPPS linked below

- Reboot and ENJOY!!



**If you fail to follow these instructions, please don't bother reporting any bugs**

**If you use Xposed, please don't bother reporting any bugs**

**If you use another kernel, please don't bother reporting any bugs**


ChangeLog:
Code:
Version 10.5 
11 August 2016
- Synced with DU source
- Version bumped to 10.5
[COLOR="Red"]- Fully Stable for Daily Driver
- With all new Snapdragon Camera
- Fixed Data Bug
- Fixed Flickering Backlit
- Fully Stable and without any bugs![/COLOR]
- See DU gerrit for all the changes

Credit and Thanks:

That said, on behalf of the DU team we say THANKS to....

JMZ Software
Baby Jesus
Code Aurora Forum
Omni ROM
Android Open Kang Project (AOKP)
Android Ice Cold Project (AICP)
XDA-Developers
SlimROMs
Preludedrew
Max Weninger
Team Black Out
CyanogenMod
Pure Nexus Project

Special Thanks to @shreesha_Murthy


Download Links:

Version 10.5: [Latest Build] https://www.androidfilehost.com/?fid=24671318762848737

Open - Gapps : http://opengapps.org/


Frequently asked questions:

The download link is slow, can you provide a mirror?
From time to time, we perform maintenance on our website but we do not authorize any mirrors. Please have patience!

I'm on a TEST BUILD and have this bug, can you help?

Please keep any discussion about test builds in the G+ community!

How can I get Viper4Android working?
Check this thread out https://plus.google.com/+JasonPasch5/posts/6JDRjdL2mKM

Are you coming from a ROM with Layers?
Make sure you remove your 'overlay' folders and perform a FULL WIPE

My battery stats are all messed and reporting the wrong percentage, what can I do?
Stop using another kernel. Do a FULL WIPE and flash the ROM again

Is this ROM CM based or AOSP based?
This ROM is based off AOSP

Does this ROM have layers or the CMTE?
This ROM uses the CM theme engine

Pulse doesn't work with [insert music app]
Check this thread out https://plus.google.com/101146731143...ts/TcSzc61xuVx

I'm getting a FC from the theme chooser, what gives?
This is due to restoring data/apps from Google. Go ahead and clear data and cache for theme chooser and theme provider then reboot you should be good moving forward.

I changed my LCD density and now the navbar looks weird, what gives?

This is currenly an issue that we are aware of and addressing. For now after you changed density reset navbar layout or stay on the stock density.


Other Links:

G+ community - https://plus.google.com/u/0/communit...28866939227235

ROM Source - https://github.com/DirtyUnicorns

Gerrit - http://gerrit.dirtyunicorns.com

Crowdin (translations) - https://crowdin.net/project/dirtyunicorns

Jira (Bug Report / Feature Request) - http://jira.dirtyunicorns.com/
 
Last edited:

rohitsonone

Senior Member
Mar 19, 2014
284
60
mumbai
Does volte work? I am on cm13 currently,its pretty stable,if anyone could comment on stability it would be helpful,moreover latest version is 10.6 if I am right,Thanks for reading
 

sheshuvadrevu

Senior Member
Dec 4, 2012
646
442
Hyderabad
Redmi Note 10 Pro
Does volte work? I am on cm13 currently,its pretty stable,if anyone could comment on stability it would be helpful,moreover latest version is 10.6 if I am right,Thanks for reading

I was not able to install cm13, it kept booting forever when I flashed the latest version. And for other two roms aosp from and cardinal aosp, Auto rotation is not working. So can you help me to install cm13 or suggest me any Rom which has auto rotation and other features working. Thank you.
 

rohitsonone

Senior Member
Mar 19, 2014
284
60
mumbai
First off all It is expected that you to be on latest baseband,radio etc. before flashing any rom.
With that out of the way,ive flashed only cm13 till now (official one) and it is pretty stable,clean flash is recommended I.e. wipe system,data,cache then flash rom , flash Gapps immediately after flashing rom(open Gapps arm nano is recommended),rom should boot fine with no problem(your problem could have been with Gapps previously)
 
  • Like
Reactions: sheshuvadrevu

sheshuvadrevu

Senior Member
Dec 4, 2012
646
442
Hyderabad
Redmi Note 10 Pro
First off all It is expected that you to be on latest baseband,radio etc. before flashing any rom.
With that out of the way,ive flashed only cm13 till now (official one) and it is pretty stable,clean flash is recommended I.e. wipe system,data,cache then flash rom , flash Gapps immediately after flashing rom(open Gapps arm nano is recommended),rom should boot fine with no problem(your problem could have been with Gapps previously)
Thanks for the info, can you guide me where I can find the latest baseband and radio. Thanks

Sent from my Redmi 3S using Tapatalk

---------- Post added at 07:24 PM ---------- Previous post was at 06:47 PM ----------

Thanks for the info, can you guide me where I can find the latest baseband and radio. Thanks

Sent from my Redmi 3S using Tapatalk
Just now I have installed cm13 nightly and even on that auto rotation is not working for me. Is it working for anyone on any Rom?

Sent from my Redmi 3S using Tapatalk
 

Top Liked Posts

  • There are no posts matching your filters.
  • 3
    http%3A%2F%2Fi.imgur.com%2FB0m0iYW.png

    Code:
    /*
     * I am not responsible for bricked devices, dead SD cards, thermonuclear
     * war, or the current economic crisis caused by you following these
     * directions. YOU are choosing to make these modificiations, and
     * if you point your finger at me for messing up your device, I will
     * laugh at you.
     */

    About Us:
    Dirty Unicorns is a project that started out with no name. It was a project that was first based off AOKP back in the early days of Jelly Bean. In the early days it was just a one man show on one device, the EVO 3D. Since then, many others have joined the project and it has grown exponentially.

    We have seen a lot of talent contribute to this project of ours. Big or small, the focus was always on contributing to the community. That is ultimately why we do what we do. After Jelly Bean, we decided to move to a new base, OmniROM. While AOKP was fun, OmniROM proved to be even more exciting base because it challenged us to see what we could do with a project that had different goals in mind. We learned a lot and again, gain contributors. With Lollipop, we moved to an AOSP base with a lot of patches from CAF to make our older devices function as they should. We grew even more and learned a whole lot more.

    It has been an awesome learning experience and is still not over! We are still learning every day and continue to move forward. Lastly, we DO NOT accept, nor ask, for donations. We don't believe in that. Everything that is necessary to keep this project going is out of our own pocket. Gerrit, Jenkins, Websites, Devices, etc. We will never ask for a dime. All we do ask, is that you have patience, search, read and try to enjoy the process with us!!

    Kernel Source:
    https://github.com/CyanogenMod/android_kernel_cyanogen_msm8916

    Flashing Instructions:

    - Verify that you're using the latest version of TWRP

    - Perform a FULL WIPE as described below if coming from another ROM or a different version of Android
    (A full wipe is when you wipe system/data/cache)

    - Flash the latest version of this ROM

    - Flash recommended GAPPS linked below

    - Reboot and ENJOY!!



    **If you fail to follow these instructions, please don't bother reporting any bugs**

    **If you use Xposed, please don't bother reporting any bugs**

    **If you use another kernel, please don't bother reporting any bugs**


    ChangeLog:
    Code:
    Version 10.5 
    11 August 2016
    - Synced with DU source
    - Version bumped to 10.5
    [COLOR="Red"]- Fully Stable for Daily Driver
    - With all new Snapdragon Camera
    - Fixed Data Bug
    - Fixed Flickering Backlit
    - Fully Stable and without any bugs![/COLOR]
    - See DU gerrit for all the changes

    Credit and Thanks:

    That said, on behalf of the DU team we say THANKS to....

    JMZ Software
    Baby Jesus
    Code Aurora Forum
    Omni ROM
    Android Open Kang Project (AOKP)
    Android Ice Cold Project (AICP)
    XDA-Developers
    SlimROMs
    Preludedrew
    Max Weninger
    Team Black Out
    CyanogenMod
    Pure Nexus Project

    Special Thanks to @shreesha_Murthy


    Download Links:

    Version 10.5: [Latest Build] https://www.androidfilehost.com/?fid=24671318762848737

    Open - Gapps : http://opengapps.org/


    Frequently asked questions:

    The download link is slow, can you provide a mirror?
    From time to time, we perform maintenance on our website but we do not authorize any mirrors. Please have patience!

    I'm on a TEST BUILD and have this bug, can you help?

    Please keep any discussion about test builds in the G+ community!

    How can I get Viper4Android working?
    Check this thread out https://plus.google.com/+JasonPasch5/posts/6JDRjdL2mKM

    Are you coming from a ROM with Layers?
    Make sure you remove your 'overlay' folders and perform a FULL WIPE

    My battery stats are all messed and reporting the wrong percentage, what can I do?
    Stop using another kernel. Do a FULL WIPE and flash the ROM again

    Is this ROM CM based or AOSP based?
    This ROM is based off AOSP

    Does this ROM have layers or the CMTE?
    This ROM uses the CM theme engine

    Pulse doesn't work with [insert music app]
    Check this thread out https://plus.google.com/101146731143...ts/TcSzc61xuVx

    I'm getting a FC from the theme chooser, what gives?
    This is due to restoring data/apps from Google. Go ahead and clear data and cache for theme chooser and theme provider then reboot you should be good moving forward.

    I changed my LCD density and now the navbar looks weird, what gives?

    This is currenly an issue that we are aware of and addressing. For now after you changed density reset navbar layout or stay on the stock density.


    Other Links:

    G+ community - https://plus.google.com/u/0/communit...28866939227235

    ROM Source - https://github.com/DirtyUnicorns

    Gerrit - http://gerrit.dirtyunicorns.com

    Crowdin (translations) - https://crowdin.net/project/dirtyunicorns

    Jira (Bug Report / Feature Request) - http://jira.dirtyunicorns.com/
    1
    Thanks for Awsome work and awsome rom
    1
    First off all It is expected that you to be on latest baseband,radio etc. before flashing any rom.
    With that out of the way,ive flashed only cm13 till now (official one) and it is pretty stable,clean flash is recommended I.e. wipe system,data,cache then flash rom , flash Gapps immediately after flashing rom(open Gapps arm nano is recommended),rom should boot fine with no problem(your problem could have been with Gapps previously)
    1
    androidfilehost.com
    Miui7.zip by kingflasher