• If you are experiencing issues logging in, we moved to a new and more secure software and older account passwords were not able to be migrated. We recommend trying to reset your password, then contacting us if there are issues.
  • Nearly done! Migration cleanup is mostly done. There are a small number of issues left that we continue to work on, but all the heavy lifting is done. We still would love to hear feedback over at this thread and also check out the new XDA app! Thanks and we hope you enjoy the new forums, and thanks for your support of XDA <3

[ROM] [6.0.1] Unofficial CyanogenMod 13 - Jiayu S3 plus

DerTeufel1980

Inactive Recognized Developer
Jul 31, 2011
10,302
27,636
0
CyanogenMod 13 is a free, community built distribution of Android 6.0.1 (Marshmallow) which greatly extends the capabilities of your phone.

This is the unofficial Build of CM 13 for Jiayu S3 plus (not advanced or basic), with mt6753 soc


Code:
#include 
/*
 * Your warranty is now void.
 *
 * I am not responsible for bricked devices, dead SD cards,
 * thermonuclear war, or you getting fired because the alarm app failed. Please
 * do some research if you have any concerns about features included in this ROM
 * before flashing it! YOU are choosing to make these modifications, and if
 * you point the finger at me for messing up your device, I will laugh at you.
 */
Installation Instructions:


XDA:DevDB Information
Cyanogenmod for Jiayu S3 plus, ROM for all devices (see above for details)

Contributors
DerTeufel1980, superdragonpt, fire855
Source Code: https://github.com/MediatekAndroidDevelopers

ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: custom recovery installed

Version Information
Status: Stable

Created 2016-07-26
Last Updated 2016-07-26
 

DerTeufel1980

Inactive Recognized Developer
Jul 31, 2011
10,302
27,636
0
Reserved

Q: After ROM boot up, I'm getting SetUP wizard errors / other Gapps FC / Black screen on first boot, why ?
A: On marshmallow based Roms, you need to flash ROM and gapps at the same time
TWRP even allows you to flash multiple .zip files

Q: Why no Mediatek Engineering Menu?
A: Its Mediatek proprietary, ugly , not needed on our builds.
Relevant features used on Mediatek E. Menu have been ported to our builds already using aosp / our implementations ( Sensors calibration , Band Mode, etc)

Q: Do we get The Fast Charge you guys made on Lollipop RC's ?
A: Yes, Fast Charge implementation was implemented on our MM builds

Q: App "x" is not working, why?
A: First make sure the app works under Marshmallow

Q: Something wrong with my Bluetooth, can't connect /pair with my "x" device , car-BT
A: Bluetooth should be backwards compatible , some OEMs don't also follow some guidelines , surely can be improved.
Post your BT model, Car model and year to help us out determining compatibility issues
 
Last edited:

batuzai04123

Senior Member
Dec 26, 2012
206
66
28
Hi, first of all I would like to say thank u for all your hardwork :)

I have came across on the specifications page for Mediatek's MT6753 well which was our chipset anyway.
http://www.mediatek.com/en/products/mobile-communications/smartphone1/mt6753/

The CPU clock speed stated on the page was 1.5ghz. Ours was max clocked at 1.3ghz?

Is there any possibility, (not sure if our mtk kernel source is open) that we could get a speedboost, a step up of 200mhz for our cpu?
Or was the 1.5ghz version is already stable and has a chance to boost it up to MT6572's 1.7ghz as well.

I would be glad if anyone can enlighten me about this. Thank you.
 

makona

Senior Member
Mar 1, 2011
54
6
0
@superdragonpt
Not sure if this is the right thread to report issues of the ROM.

1. Bluetooth not pairing with car. It can detect the headunit but when I try to pair after i enter the pin it fails. I am using the headunit for mitsubishi mirage 2013
Mirage CNE-6515-N HU Specs:

Main Amplifier:
Power Output: 20 Watts RMS x 4 channels into 4-ohms @ < 10 % THD+N
S/N Ratio: 70 dBA below reference. (Ref.: 1 Watt, 4-ohms)
Max Power: 40 x 4 watts into 4-ohms, all channels driven
Frequency Response: 20 Hz to 20 kHz -3dB Aux input used as source reference
3 Band Equalizer (Treble, Mid, Bass)
Reference Supply Voltage: 14.4 VDC

DVD/CD Player:
Compatible Formats: DVD-R, , DVD-RW, DVD+R, DVD+RW, CD-R, CD-RW, CD-DA, MP3, WMA, HDCD, SVCD,VCD, MPEG, JPEG, MP3/WMA burned into a DVD+RW or DVD-RW and CD-R/RW
S/N Ratio: 85 dBA
Dynamic Range: > 95 dB
Frequency Response: 20 Hz to 20 kHz, -3dB
Channel Separation: > 60dB @ 1 KHZ
D/A Converter(s): 6-channels high performance 24-bit, 192 kHz, multi-bit Sigma Delta modulation. DAC supports sample rates from 8-192 kHz.
Electronic Skip Protection (ESP): DVD: 2-3 sec, CD-DA: 10 sec., MP3: 100 sec., WMA: 200 sec. (ESP time approximate)
Mechanical vibration stability: 10-200Hz, X/Y/Z direction: 1.0G

Video Section:
Format: NTSC, PAL (auto-detect)
Output: 1Vp-p (75-ohm), buffered
Input: 1Vp-p (75-ohm)

FM Tuner Section:
Tuning Range: 87.5 MHz - 107.9 MHz
Mono Sensitivity (-30dB): 10 dBu
Quieting Sensitivity (-50dB): 15 dBu
Alternate Channel Sensitivity: 70 dB
S/N Ratio @ 1KHz: 58 dB
Image Rejection: 60 dB
Stereo Separation @ 1 KHz; 30dB
Frequency Response: 30Hz - 15 KHz, -3 dB

AM Tuner Section:
Tuning Range: 530 kHz - 1710 kHz
Sensitivity (-20dB): 20 dBu
S/N Ratio @ 1KHz: 50 dB
Image Rejection: 60 dB
Frequency Response: 50Hz - 2 KHz, -3 dB

Monitor Section:
Screen Size: 6.2" (Measured diagonally)
Screen Type: TFT Digital Display active matrix
Response Time: 30 ms rise time, 50 ms fall tim/Compositee resolution, DVD
Video in: 280,280 sub pixels, 1200 (W) x 234 (H)

Built-in Navigation (Via Micro SD Card)
SD Card: Micro SD

GPS
SiRF Prima 600MHZ CPU, Advanced ARM 11 Architecture
256 MB Nand Flash ​
256 MB DDR-400MHz RAM
Windows CE 6.0

USB
High-Speed USB 2.0


Bluetooth:
Hands-Free, Phonebook, Recent Calls (Dialed, Missed, Received) Synchronize, Caller ID and Audio Streaming, Mobile Phone

TPMS Ready (optional)

General:
Auxiliary Input impedance: 10 K-ohms
Power Supply: 10.5 to 16 VDC, negative ground
Fuse: 10-amp, mini ATm type
DN chassis dimensions : 7"x7"x 2" (178mm x 178mm x 100mm)

2. When SD card is used as "Internal Storage" and app is installed at SD card, every time I reboot all the shortcut icon disappears in Home Screen.
3. FB Messenger hangs when uploading pictures. Workaround grant permissions via Settings > App > Messenger
 
  • Like
Reactions: superdragonpt

superdragonpt

Recognized Developer
Apr 27, 2013
4,892
19,216
0
Lisbon / Taiwan / USA
www.caixamagica.pt
@superdragonpt
Not sure if this is the right thread to report issues of the ROM.

1. Bluetooth not pairing with car. It can detect the headunit but when I try to pair after i enter the pin it fails. I am using the headunit for mitsubishi mirage 2013
Mirage CNE-6515-N HU Specs:

Main Amplifier:
Power Output: 20 Watts RMS x 4 channels into 4-ohms @ < 10 % THD+N
S/N Ratio: 70 dBA below reference. (Ref.: 1 Watt, 4-ohms)
Max Power: 40 x 4 watts into 4-ohms, all channels driven
Frequency Response: 20 Hz to 20 kHz -3dB Aux input used as source reference
3 Band Equalizer (Treble, Mid, Bass)
Reference Supply Voltage: 14.4 VDC

DVD/CD Player:
Compatible Formats: DVD-R, , DVD-RW, DVD+R, DVD+RW, CD-R, CD-RW, CD-DA, MP3, WMA, HDCD, SVCD,VCD, MPEG, JPEG, MP3/WMA burned into a DVD+RW or DVD-RW and CD-R/RW
S/N Ratio: 85 dBA
Dynamic Range: > 95 dB
Frequency Response: 20 Hz to 20 kHz, -3dB
Channel Separation: > 60dB @ 1 KHZ
D/A Converter(s): 6-channels high performance 24-bit, 192 kHz, multi-bit Sigma Delta modulation. DAC supports sample rates from 8-192 kHz.
Electronic Skip Protection (ESP): DVD: 2-3 sec, CD-DA: 10 sec., MP3: 100 sec., WMA: 200 sec. (ESP time approximate)
Mechanical vibration stability: 10-200Hz, X/Y/Z direction: 1.0G

Video Section:
Format: NTSC, PAL (auto-detect)
Output: 1Vp-p (75-ohm), buffered
Input: 1Vp-p (75-ohm)

FM Tuner Section:
Tuning Range: 87.5 MHz - 107.9 MHz
Mono Sensitivity (-30dB): 10 dBu
Quieting Sensitivity (-50dB): 15 dBu
Alternate Channel Sensitivity: 70 dB
S/N Ratio @ 1KHz: 58 dB
Image Rejection: 60 dB
Stereo Separation @ 1 KHz; 30dB
Frequency Response: 30Hz - 15 KHz, -3 dB

AM Tuner Section:
Tuning Range: 530 kHz - 1710 kHz
Sensitivity (-20dB): 20 dBu
S/N Ratio @ 1KHz: 50 dB
Image Rejection: 60 dB
Frequency Response: 50Hz - 2 KHz, -3 dB

Monitor Section:
Screen Size: 6.2" (Measured diagonally)
Screen Type: TFT Digital Display active matrix
Response Time: 30 ms rise time, 50 ms fall tim/Compositee resolution, DVD
Video in: 280,280 sub pixels, 1200 (W) x 234 (H)

Built-in Navigation (Via Micro SD Card)
SD Card: Micro SD

GPS
SiRF Prima 600MHZ CPU, Advanced ARM 11 Architecture
256 MB Nand Flash ​
256 MB DDR-400MHz RAM
Windows CE 6.0

USB
High-Speed USB 2.0


Bluetooth:
Hands-Free, Phonebook, Recent Calls (Dialed, Missed, Received) Synchronize, Caller ID and Audio Streaming, Mobile Phone

TPMS Ready (optional)

General:
Auxiliary Input impedance: 10 K-ohms
Power Supply: 10.5 to 16 VDC, negative ground
Fuse: 10-amp, mini ATm type
DN chassis dimensions : 7"x7"x 2" (178mm x 178mm x 100mm)

2. When SD card is used as "Internal Storage" and app is installed at SD card, every time I reboot all the shortcut icon disappears in Home Screen.
3. FB Messenger hangs when uploading pictures. Workaround grant permissions via Settings > App > Messenger


1- Known issue, thanks for the BT unit details
2- already answered
3- seems you find the cause, FB apps sucks... Thank them
 
  • Like
Reactions: DerTeufel1980
Mar 6, 2016
33
16
0
Dublin
Having used this for a few days now I love it however I have discovered one bug and one suggestion for better quality of life.

Bug: The aeroplane mode in the power menu (press and hold power button) doesn't work. The tile in the drop down menu still works fine, just the power menu one doesn't.

Quality of Life: Currently there is no way of disabling both sims, one always has to be enabled. Not a big deal for most people, but as someone who travels between countries quite frequently, it would be nice to be able to switch one sim off before putting on the other to avoid any possible roaming charges.

Thanks again for all the support, I was also wondering what version of Xposed would work with CM13?

Regards,
 

DerTeufel1980

Inactive Recognized Developer
Jul 31, 2011
10,302
27,636
0
Hey, sorry, I missed your pm.
I need to check airplane mode.... Didn't notice yet.

The other thing isn't meant to be done this way in aosp. I may take a look at it as well, but I can't promise...

The M.A.D. Team
 
  • Like
Reactions: Hellhacker1990

superdragonpt

Recognized Developer
Apr 27, 2013
4,892
19,216
0
Lisbon / Taiwan / USA
www.caixamagica.pt
Build 2 : 20160810

  • Source Synced ( (including Security Updates )
  • Fixed: Bluetooth (headset , car-BT)
  • Fixed: Internal Android VPN Client (tested on PPPT protocol)
  • Fixed Wi-Fi (random connection drops)
  • Added option to select 2.4 or 5Ghz Wifi frequency to advanced wifi options
  • Fixed FMRadio (merged previous patch)


Rom link on xda DevDB as well


cheers