[ROM][6.0.1][UNOFFICIALY][ CM-13.0 For Huawei P9 ][Update 13/12/2016]

[BXM500]

Can you boot to bootloader? If you can and it is unlocked you can try ti boot to recovery with the command:
fastboot boot recoveryname.img

You mean the "fastboot & rescue mode"? Power + Vol Down.

When I try to boot the recovery img file I get:

C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot boot twrp-recovery.img
downloading 'boot.img'...
OKAY [ 0.488s]
booting...
FAILED (remote: Command not allowed)
finished. total time: 0.500s

Also:
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot oem get-bootinfo
...
(bootloader) unlocked
OKAY [ 0.010s]
finished. total time: 0.011s


Any other ideas or did I really brick my phone?

 

[Potato997]

Try to flash TWRP again, the bootloader is unlocked.
fastboot flash recovery twrp-recovery.img
Then try again to reboot to recovery with Volume up + Power.

 

[BXM500]

Try to flash TWRP again, the bootloader is unlocked.
fastboot flash recovery twrp-recovery.img
Then try again to reboot to recovery with Volume up + Power.

What I did:

C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot devices
MWS0216B08009131 fastboot

C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot flash recovery twrp-recovery.img
target reported max download size of 471859200 bytes
sending 'recovery' (16414 KB)...
OKAY [ 0.355s]
writing 'recovery'...
OKAY [ 0.213s]
finished. total time: 0.571s

After rebooting with Vol Up it goes to Huawei eRecovery.

Thanks, but no luck.

 

[xf69]

What I did:

C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot devices
MWS0216B08009131 fastboot

C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot flash recovery twrp-recovery.img
target reported max download size of 471859200 bytes
sending 'recovery' (16414 KB)...
OKAY [ 0.355s]
writing 'recovery'...
OKAY [ 0.213s]
finished. total time: 0.571s

After rebooting with Vol Up it goes to Huawei eRecovery.

Thanks, but no luck.

Hold vol up and power. Device restarts. Release power on first vibrate. Release vol up on huawei logo and second vibrate. That order starts the recovery partition

 

[venom04]

Can someone show battery stats on CM? With Screen of time. Thanks in advance

Screenshots attached!

 

[askor]

What was screen on time? Click display to see.

Wys?ane z Huawei P9

 

[venom04]

What was screen on time? Click display to see.

Wys?ane z Huawei P9

Please see screenshots, most power uses cLock until I set refreshment time to 4 hours!

 

[geekercai]

Hello !


New update soon !

GPS already fixed .

New module HWC, thanks to XePeleato !

So please stay tuned



Best regards !


Edit :

Right now, fps do not work at all on my device .... need some time to fix it !

Anyway a new update will be here after fps will be proper fixed .

Can I replace the boot.img with p 9plus's to apply update to p 9plus? thanks

 

[surdu_petru]

Can I replace the boot.img with p 9plus's to apply update to p 9plus? thanks

Nop, you can't ... and unfortunately there will be no update to P9 Plus . Thanks for understanding !

 

[GodKingKnight]

Hey Surdu. Any updates my friend? I know you're real busy.

 

[tzic]

Nop, you can't ... and unfortunately there will be no update to P9 Plus . Thanks for understanding !

@surdu_petru Fingerprint does not work at all. I am on latest version. Any ideas on how to make it work?

 

[sk0n3]

@tzic

it will be avaliable on the 7.1.1's future updates

 

[tzic]

@surdu_petru So please add to description under "not working" that Fingerprint does not work as well

 

[calz0]

@surdu_petru So please add to description under "not working" that Fingerprint does not work as well

Fingerprint worked for me, when I flashed it right after a stock ROM. After an update it didn't work anymore. NexXuska wrote something about that in his RR thread, I guess, but I'm not sure

 

[carlbelle05]

The fingerprint is working for me as well. But its up to the stock rom that you use.This version is working fine ( HUAWEIP9L09C432B182.zip ).I used other versions before but it didnt work,but this one fine.
Like surdu_petru said go back to stock. and then when you get to stock. DO NOT register your fingerprint yet. DO IT in cyanogenmod at the setup process.

 

[Simon G]

Is that right that the Cm13 does still 100% works at Time after to many Time that release. Gives for P9 a 6.0.1 Rom thats 100% works Aosp RR Tesla Validus or another Rom??

Sent from my EVA-L09 using XDA-Developers Legacy app

 

[aceclift]

@surdu_petru So please add to description under "not working" that Fingerprint does not work as well

the fingerprint will work as long as you only do a factory reset from stock and then install cm13. whereas if you do a full wipe it will not work at all since you have removed the drivers cm13 depends on from the stock firmware to make fingerprint sensor work

 

[calebccff]

I tried to install the latest version of this ROM by wiping /system and then flashing the zip, first boot took about 10 minutes and I was then prompted for a password to unlock android, I think this is related to encryption, could it be because I didn't wipe the /data partition? (TWRP has errors mounting /data for me) does anyone else have the same problem or apossible fix?
Thanks.

 

[Potato997]

I tried to install the latest version of this ROM by wiping /system and then flashing the zip, first boot took about 10 minutes and I was then prompted for a password to unlock android, I think this is related to encryption, could it be because I didn't wipe the /data partition? (TWRP has errors mounting /data for me) does anyone else have the same problem or apossible fix?
Thanks.

Mhn you could try two things:
First, try to Format Data (NOT WIPE) entering in TWRP -> Wipe -> Format Data -> Type "yes"
If it still can't mount data you can try to flash stock recovery and do a factory reset from it. This one worked for me

 

[calebccff]

Mhn you could try two things:
First, try to Format Data (NOT WIPE) entering in TWRP -> Wipe -> Format Data -> Type "yes"
If it still can't mount data you can try to flash stock recovery and do a factory reset from it. This one worked for me

I realised that this was due to the encryption enabled by default (why Huawei why). In the end I fixed it by formatting /data and then restoring from my backup of EMUI and when it asks me to setup security I skipped all of it, I then went into settings>security and cleared credentials. Then reboot into TWRP and format /system and then flash Cyanogenmod.

Thanks for your help